TEXT View Source
# MICOM-INTERLAN, INC.
NI5010-1
NIC Type Ethernet
Network Transfer Rate 10Mbps
Data Bus 8-bit ISA
Topology Linear Bus
Wiring Type AUI transceiver via DB-15 port
RG-58A/U 50ohm coaxial
Boot ROM Available
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|----------------+-------+---------------------------+-------|
| RG-58A/U 50ohm | CN1 | AUI transceiver via DB-15 | CN2 |
| coaxial port | | port | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Function | Label | Position |
|----------------------------------------+-------+-----------|
| » | Receive Buffer size selected at | W1 | Pins 2 & |
| | 2KB | | 3 closed |
|---+------------------------------------+-------+-----------|
| | Receive Buffer size selected at | W1 | Pins 1 & |
| | 8KB | | 2 closed |
|---+------------------------------------+-------+-----------|
| » | Transceiver type AC | W2 | Pins 2 & |
| | | | 3 closed |
|---+------------------------------------+-------+-----------|
| | Transceiver type DC | W2 | Pins 1 & |
| | | | 2 closed |
|---+------------------------------------+-------+-----------|
| » | IRQ3 enabled | W7 | Pins 2 & |
| | | | 3 closed |
|---+------------------------------------+-------+-----------|
| | IRQ3 disabled | W7 | Pins 1 & |
| | | | 2 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DMA CHANNEL SELECTION |
|------------------------------------------------------------|
| DMA | W8 | W14 |
|------------------+--------------------+--------------------|
| » | 3 | Pins 2 & 3 closed | Pins 1 & 2 closed |
|---+--------------+--------------------+--------------------|
| » | 1 | Pins 1 & 2 closed | Pins 2 & 3 closed |
|---+--------------+--------------------+--------------------|
| | Disabled | Pins 2 & 3 closed | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BASE I/O ADDRESS SELECTION |
|------------------------------------------------------------|
| Setting | W9 | W10 | W11 | W12 | W13 |
|-------------+--------+---------+---------+--------+--------|
| | 200h | 2 & 3 | 2 & 3 | 2 & 3 | 2 & 3 | 1 & 2 |
|---+---------+--------+---------+---------+--------+--------|
| | 220h | 1 & 2 | 2 & 3 | 2 & 3 | 2 & 3 | 1 & 2 |
|---+---------+--------+---------+---------+--------+--------|
| | 240h | 2 & 3 | 1 & 2 | 2 & 3 | 2 & 3 | 1 & 2 |
|---+---------+--------+---------+---------+--------+--------|
| | 260h | 1 & 2 | 1 & 2 | 2 & 3 | 2 & 3 | 1 & 2 |
|---+---------+--------+---------+---------+--------+--------|
| | 280h | 2 & 3 | 2 & 3 | 1 & 2 | 2 & 3 | 1 & 2 |
|---+---------+--------+---------+---------+--------+--------|
| | 2A0h | 1 & 2 | 2 & 3 | 1 & 2 | 2 & 3 | 1 & 2 |
|---+---------+--------+---------+---------+--------+--------|
| | 2C0h | 2 & 3 | 1 & 2 | 1 & 2 | 2 & 3 | 1 & 2 |
|---+---------+--------+---------+---------+--------+--------|
| | 2E0h | 1 & 2 | 1 & 2 | 1 & 2 | 2 & 3 | 1 & 2 |
|---+---------+--------+---------+---------+--------+--------|
| » | 300h | 2 & 3 | 2 & 3 | 2 & 3 | 1 & 2 | 1 & 2 |
|---+---------+--------+---------+---------+--------+--------|
| | 320h | 1 & 2 | 2 & 3 | 2 & 3 | 1 & 2 | 1 & 2 |
|---+---------+--------+---------+---------+--------+--------|
| | 340h | 2 & 3 | 1 & 2 | 2 & 3 | 1 & 2 | 1 & 2 |
|---+---------+--------+---------+---------+--------+--------|
| | 360h | 1 & 2 | 1 & 2 | 2 & 3 | 1 & 2 | 1 & 2 |
|---+---------+--------+---------+---------+--------+--------|
| | 380h | 2 & 3 | 2 & 3 | 1 & 2 | 1 & 2 | 1 & 2 |
|---+---------+--------+---------+---------+--------+--------|
| | 3A0h | 1 & 2 | 2 & 3 | 1 & 2 | 1 & 2 | 1 & 2 |
|---+---------+--------+---------+---------+--------+--------|
| | 3C0h | 2 & 3 | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 |
|---+---------+--------+---------+---------+--------+--------|
| | 3E0h | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 |
|------------------------------------------------------------|
| Note: The pins designated above should be in the |
| closed position. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CABLE TYPE SELECTION |
|------------------------------------------------------------|
| Type | W3 | W4 | W5 | W6 | W23 |
|--------------------+-------+-------+-------+-------+-------|
| » | RG-58A/U 50ohm | 2 & 3 | 2 & 3 | 2 & 3 | 2 & 3 | 2 & 3 |
| | coaxial | | | | | |
|---+----------------+-------+-------+-------+-------+-------|
| | AUI | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 | 1 & 2 |
| | transceiver | | | | | |
| | via DB-15 port | | | | | |
|------------------------------------------------------------|
| Note: The pins designated should be in the closed |
| position. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BOOT ROM STARTING ADDRESS SELECTION |
|------------------------------------------------------------|
| Address | W15 | W16 | W17 | W18 | W19 | W20 | W21 | W22 |
|----------+------+------+-----+-----+-----+-----+-----+-----|
|»|Disabled|2 & 3 |2 & 3 |2 & 3|2 & 3|2 & 3|2 & 3|2 & 3|2 & 3|
|-+--------+------+------+-----+-----+-----+-----+-----+-----|
| | C8000h |2 & 3 |2 & 3 |2 & 3|1 & 2|2 & 3|2 & 3|1 & 2|1 & 2|
|-+--------+------+------+-----+-----+-----+-----+-----+-----|
| | C9000h |1 & 2 |2 & 3 |2 & 3|1 & 2|2 & 3|2 & 3|1 & 2|1 & 2|
|-+--------+------+------+-----+-----+-----+-----+-----+-----|
| | CA000h |2 & 3 |1 & 2 |2 & 3|1 & 2|2 & 3|2 & 3|1 & 2|1 & 2|
|-+--------+------+------+-----+-----+-----+-----+-----+-----|
| | CB000h |1 & 2 |1 & 2 |2 & 3|1 & 2|2 & 3|2 & 3|1 & 2|1 & 2|
|-+--------+------+------+-----+-----+-----+-----+-----+-----|
| | CC000h |2 & 3 |2 & 3 |1 & 2|1 & 2|2 & 3|2 & 3|1 & 2|1 & 2|
|-+--------+------+------+-----+-----+-----+-----+-----+-----|
| | EB000h |1 & 2 |1 & 2 |2 & 3|1 & 2|2 & 3|1 & 2|1 & 2|1 & 2|
|-+--------+------+------+-----+-----+-----+-----+-----+-----|
| | EC000h |2 & 3 |2 & 3 |1 & 2|1 & 2|2 & 3|1 & 2|1 & 2|1 & 2|
|-+--------+------+------+-----+-----+-----+-----+-----+-----|
| | ED000h |1 & 2 |2 & 3 |1 & 2|1 & 2|2 & 3|1 & 2|1 & 2|1 & 2|
|-+--------+------+------+-----+-----+-----+-----+-----+-----|
| | EE000h |2 & 3 |1 & 2 |1 & 2|1 & 2|2 & 3|1 & 2|1 & 2|1 & 2|
|-+--------+------+------+-----+-----+-----+-----+-----+-----|
| | EF000h |1 & 2 |1 & 2 |1 & 2|1 & 2|2 & 3|1 & 2|1 & 2|1 & 2|
|------------------------------------------------------------|
| Note:The pins designated should be in the closed |
| position. |
| |
| Note:A total of 40 base address settings are available.|
| The switches are a binary representation of the decimal|
| memory addresses. W22 is the Most Significant Bit and |
| switch W15 is the Least Significant Bit. The switches |
| have the following decimal values: W22=524288, |
| W21=262144, W20=131072, W19=65536, W18=32768, |
| W17=16384, W16=8192, and W15=4096. Turn off the |
| switches and add the values of the switches to obtain |
| the correct memory address. (Off=1, On=0) |
+------------------------------------------------------------+