TEXT View Source
# PURE DATA LTD.
PD1516PLUS-F (FIBER OPTIC)
NIC Type ARCnet
Transfer Rate 2.5Mbps
Data Bus 16-bit ISA
Topology Star
Linear Bus
Wiring Type 50/62.5/100 m Fiber optic cable
Boot ROM Available
IMG IMG 1
+------------------------------------------------------------+
| CONFIGURATION MEMORY CLEAR |
|------------------------------------------------------------|
| Clear | JP1 |
|--------------------------------------------------+---------|
| » | Normal operation | Open |
|---+----------------------------------------------+---------|
| | Clear all addresses and settings from memory | Closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CARDS INSTALLED |
|------------------------------------------------------------|
| Card | JP2A | JP2B | JP2C | JP2D |
| number | | | | |
|------------+-----------+-----------+-----------+-----------|
| 1 | Closed | Open | Open | Open |
|------------+-----------+-----------+-----------+-----------|
| 2 | Open | Closed | Open | Open |
|------------+-----------+-----------+-----------+-----------|
| 3 | Open | Open | Closed | Open |
|------------+-----------+-----------+-----------+-----------|
| 4 | Open | Open | Open | Closed |
|------------------------------------------------------------|
| Note:If there is only one NIC installed in a system, set |
| this option to the "1" position. If this NIC is the |
| second NIC to be installed in a system, set this option |
| to the "2" position and so on. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| COMPATIBILITY MODE |
|------------------------------------------------------------|
| Condition | JP3 |
|---------------------------------------------+--------------|
| » | Compatibility mode disabled | Open |
|---------+-----------------------------------+--------------|
| | Compatibility mode enabled | Closed |
|------------------------------------------------------------|
| Note: Compatibility mode should be enabled only when the |
| NIC is installed in a system using a Suntac 286 chipset. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CONNECTORS |
|------------------------------------------------------------|
| Connectors | Definition |
|-------------------------------+----------------------------|
| COM2 connector | Transmit |
|-------------------------------+----------------------------|
| COM1 connector | Receive |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED | Color | Status | Condition |
|------+-------+----------+----------------------------------|
| LED1 | Red | Blinking | I/O bus activity |
|------+-------+----------+----------------------------------|
| LED1 | Red | Off | No I/O bus activity |
|------+-------+----------+----------------------------------|
| LED2 | Green | On | Data is being transmitted or |
| | | | received |
|------+-------+----------+----------------------------------|
| LED2 | Green | Blinking | No network activity detected, or |
| | | | bad connection |
+------------------------------------------------------------+