TEXT View Source
# FUJITSU CORPORATION
M2488
Device Type External Tape Drive
Interface SCSI-2 Fast/Wide
Format Unidentified
Sustained Transfer Rate 20 MBPS
Size 5.25 in. full height
View Top
IMG IMG 1
IMG IMG 2
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED | Color | Status | Condition |
|-------+--------------+--------+----------------------------|
| LED1 | Unidentified | On | Prompts user to load the |
| | | | cartridge. |
|-------+--------------+--------+----------------------------|
| LED1 | Unidentified | Off | Cartridge is loaded |
|-------+--------------+--------+----------------------------|
| LED2 | Unidentified | On | Drive is selected on the |
| | | | SCSI bus |
|-------+--------------+--------+----------------------------|
| LED2 | Unidentified | Off | Drive is not selected on |
| | | | the SCSI bus |
|-------+--------------+--------+----------------------------|
| LED3 | Unidentified | On | The drive is |
| | | | reading/writing compressed |
| | | | data |
|-------+--------------+--------+----------------------------|
| LED3 | Unidentified | Off | The drive is |
| | | | reading/writing |
| | | | uncompressed data |
|------------------------------------------------------------|
| Note: LED’s 4 through 10 each represent the different tape |
| positions between BOT and EOT. When the tape is moving in |
| the forward position, the LED’s light up sequentially |
| starting from the BOT position. When the tape is moving in |
| reverse, the LED’s light up sequentially in the reverse |
| order. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MISCELLANEOUS TECHNICAL NOTES |
|------------------------------------------------------------|
| The IPM is an adapter card that is available in four |
| different configurations: 50-pin SCSI connector (2x), |
| 68-pin SCSI connector (2x), 50-pin SCSI connector & |
| Terminating Resistor, 68-pin SCSI connector & Terminating |
| Resistor. The Termination Power is supplied by the SCSI |
| interface through pin 36. This setting is only valid with |
| this specific IPM installed. |
+------------------------------------------------------------+