TEXT View Source
# SEAGATE TECHNOLOGY, INC.
SIDEWINDER 50 EXTERNAL
Device Type External Tape Drive
Interface SCSI-2 Fast/Wide
Format AIT-1
Sustained Transfer 3MBPS (Native), 6 to 9MBPS (Compressed)
Rate
Size 5.25 in. half height
View Bottom
IMG IMG 1
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Setting | Label | Position |
|-------------------------------------+-------+--------------|
| » | Parity check enabled | JP1/1 | Open |
|---+---------------------------------+-------+--------------|
| | Parity check disabled | JP1/1 | Closed |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | JP1/2 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | SW2/1 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | SW2/2 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | SW2/3 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | SW2/4 | Unidentified |
| | alter | | |
|---+---------------------------------+-------+--------------|
| » | Termination enabled | SW2/6 | On |
|---+---------------------------------+-------+--------------|
| | Termination disabled | SW2/6 | Off |
|---+---------------------------------+-------+--------------|
| » | Data compression enabled | SW2/7 | On |
|---+---------------------------------+-------+--------------|
| | Data compression disabled | SW2/7 | Off |
|---+---------------------------------+-------+--------------|
| » | Factory configured - do not | SW2/8 | On |
| | alter | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DRIVE SELECT ID |
|------------------------------------------------------------|
| Note: To configure the tape drive's SCSI ID, you must set |
| SW1 to the desired ID number. The SCSI ID number is |
| viewable through the viewing window on SW1. The address is |
| shown in hexadecimal form. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| TERMINATION POWER SELECTION |
|------------------------------------------------------------|
| Setting | SW2/5 |
|-------------------------------------------------+----------|
| » | TERMPWR supplied by drive | On |
|---+---------------------------------------------+----------|
| | TERMPWR supplied by SCSI interface to drive | Off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MANUFACTURERS RECOMMENDED MEDIA |
|------------------------------------------------------------|
| Tape | Capacity Without | Capacity With |
| | Compression | Compression |
|-------+--------------------------+-------------------------|
| AIT-1 | 25GB | 50GB to 75GB |
+------------------------------------------------------------+
IMG IMG 2
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
|LED1| LED2 | LED3 | LED4 | Condition |
|----+------------+------------+------------+----------------|
| On | Variable | Variable | Variable | Power on |
|----+------------+------------+------------+----------------|
|Off | Off | Off | Off | Power off |
|----+------------+------------+------------+----------------|
| On | Off | Off | Off |No drive or SCSI|
| | | | | activity |
|----+------------+------------+------------+----------------|
| On | On | Off | Off | SCSI activity |
| | | | | only |
|----+------------+------------+------------+----------------|
| On |Quick flash |Quick flash | Off | Write-enabled |
| | | | | tape being |
| | | | | loaded or |
| | | | | unloaded |
|----+------------+------------+------------+----------------|
| On |Quick flash |Quick flash | On |Write-protected |
| | | | | tape being |
| | | | | loaded or |
| | | | | unloaded |
|----+------------+------------+------------+----------------|
| On | Off | On |Quick flash | Cleaning tape |
|----+------------+------------+------------+----------------|
| On | Off | On | Off |Tape loaded - No|
| | | | | drive or SCSI |
| | | | | activity |
|----+------------+------------+------------+----------------|
| On | On | On | Off | Tape loaded - |
| | | | |Activity on SCSI|
| | | | | bus only |
|----+------------+------------+------------+----------------|
| On |Quick flash | On | Off | Tape loaded - |
| | | | | SCSI and drive |
| | | | | activity |
|----+------------+------------+------------+----------------|
| On | Variable | On | On |Write-protected |
| | | | | tape loading |
| | | | | into drive |
|----+------------+------------+------------+----------------|
| On | Variable | Blinking | Variable | Media error |
| | | | |(loaded tape has|
| | | | | excess errors) |
|----+------------+------------+------------+----------------|
| On |Unidentified|Unidentified| Blinking |Tape heads need |
| | | | | cleaning |
|----+------------+------------+------------+----------------|
| On |Unidentified|Unidentified|Double flash| Self-test |
| | | | | failure |
|----+------------+------------+------------+----------------|
| On | Slow flash |Unidentified|Unidentified|Hardware failure|
| | | | | - Waiting for |
| | | | | reset |
|----+------------+------------+------------+----------------|
| On |Unidentified| Slow flash |Unidentified|Hardware failure|
| | | | | - Waiting for |
| | | | | eject |
|------------------------------------------------------------|
|Note: The color of the LED's are unidentified. |
+------------------------------------------------------------+