TEXT View Source
# ANGIA COMMUNICATIONS, INC.
PCMCIA 14400BPS DATA/14400BPS FAX
Card Type Fax, Modem (asynchronous)
Chip Set Unidentified
Maximum Data Rate 14.4Kbps
Maximum Fax Rate 14.4Kbps
Data Bus PCMCIA Type II
Fax Class Class I
Data Modulation Bell 103/212A
Protocol
ITU-T V.21, V.22, V.22bis, V.23, V.32,
V.32bis
Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29
Protocol
Error MNP5, V.42, V.42bis
Correction/Compression
V2329
+------------------------------------------------------------+
| SUPPORTED COMMAND SET |
|------------------------------------------------------------|
| Basic AT Commands |
|------------------------------------------------------------|
| AT, ‘+++’, ‘Comma’, A/ |
|------------------------------------------------------------|
| A, B, C, D, E, F, H, L, M, O, P, Q, S, T, V, W, X, Y, Z |
|------------------------------------------------------------|
| &C, &D, &E, &G, &J, &L, &M, &P, &Q, &R, &T, &V, &W, &Y, &Z |
|------------------------------------------------------------|
| Extended AT Commands |
|------------------------------------------------------------|
| \A, \B, \C, \G, \J, \K, \N \Q, \V, \X, \Z, %A, %E |
|------------------------------------------------------------|
| S Registers |
|------------------------------------------------------------|
| S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S11, S12, S16, |
| S18, S25, S26, S36 |
|------------------------------------------------------------|
| S38, S39, S46, S48 |
|------------------------------------------------------------|
| Note: See MHI Help file for full command documentation. |
+------------------------------------------------------------+
Proprietary AT Command Set
+------------------------------------------------------------+
| BIT MAPPED REGISTERS |
|------------------------------------------------------------|
| Register | Default |
|-----------------------------+------------------------------|
| S14 | Read-only |
|-----------------------------+------------------------------|
| S19 | 26 |
|-----------------------------+------------------------------|
| S20 | 32 |
|-----------------------------+------------------------------|
| S21 | Read-only |
|-----------------------------+------------------------------|
| S22 | Read-only |
|-----------------------------+------------------------------|
| S23 | Read-only |
|-----------------------------+------------------------------|
| S27 | Read-only |
+------------------------------------------------------------+
+------------------------------------------------------------+
| COMPRESSION |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %Cn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects data compression |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| %C0 | Data compression disabled |
|--------------+---------------------------------------------|
| %C1 | Data compression enabled; V.42bis during |
| | LAPM, MNP5 during MNP |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CONNECT MODE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Nn [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls the type of connection the modem |
| | will operate in |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| \N0 | Direct mode enabled |
|--------------+---------------------------------------------|
| \N1 | Normal mode enabled |
|--------------+---------------------------------------------|
| \N2 | MNP reliable mode enabled |
|--------------+---------------------------------------------|
| \N3 | MNP auto-reliable mode enabled |
|--------------+---------------------------------------------|
| \N4 | V.42 reliable mode enabled |
|--------------+---------------------------------------------|
| \N5 | V.42 auto-reliable mode enabled |
|--------------+---------------------------------------------|
| \N6 | Reliable mode enabled |
|--------------+---------------------------------------------|
| í \N7 | Auto-reliable mode enabled |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DISPLAY FIRMWARE VERSION |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %V [cmds] |
|--------------+---------------------------------------------|
| Description: | Displays firmware version information |
+------------------------------------------------------------+
+------------------------------------------------------------+
| ENQ/ACK |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Hn [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls Hewlett Packard ENQ/ACK protocol |
|------------------------------------------------------------|
| Command | Function |
|----------------+-------------------------------------------|
| í \H0 | Hewlett Packard ENQ/ACK disabled |
|----------------+-------------------------------------------|
| \H1 | Hewlett Packard ENQ/ACK emulating |
| | terminal enabled |
|----------------+-------------------------------------------|
| \H2 | Hewlett Packard ENQ/ACK emulating host |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FACTORY DEFAULT PROFILE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &F [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets values in active profile to values |
| | found in the default profile |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| &F0 | Restore auto-reliable |
| | compression/correction default profile |
|---------------+--------------------------------------------|
| &F1 | Restore auto-reliable |
| | compression/correction default profile |
+------------------------------------------------------------+
+------------------------------------------------------------+
| INACTIVITY TIMER |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Tn [cmds] |
|--------------+---------------------------------------------|
| Default: | 0 |
|--------------+---------------------------------------------|
| Range: | 0-90 |
|--------------+---------------------------------------------|
| Unit: | 1 minute |
|--------------+---------------------------------------------|
| Description: | Sets the length of time that the modem does |
| | not receive information before it |
| | disconnects. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MINIMUM MODEM PORT RATE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %Mn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the minimum modem port rate |
|------------------------------------------------------------|
| Command | Function |
|-------------------------+----------------------------------|
| í %M300 | 300bps selected |
|-------------------------+----------------------------------|
| %M1200 | 1200bps selected |
|-------------------------+----------------------------------|
| %M2400 | 2400bps selected |
|-------------------------+----------------------------------|
| %M4800 | 4800bps selected |
|-------------------------+----------------------------------|
| %M7200 | 7200bps selected |
|-------------------------+----------------------------------|
| %M9600 | 9600bps selected |
|-------------------------+----------------------------------|
| %M12000 | 12000bps selected |
|-------------------------+----------------------------------|
| %M14400 | 14400bps selected |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MODEM PORT RATE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %Bn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the modem port rate |
|------------------------------------------------------------|
| Command | Function |
|---------------------+--------------------------------------|
| %B300 | 300bps selected |
|---------------------+--------------------------------------|
| %B1200 | 1200bps selected |
|---------------------+--------------------------------------|
| %B2400 | 2400bps selected |
|---------------------+--------------------------------------|
| %B4800 | 4800bps selected |
|---------------------+--------------------------------------|
| %B7200 | 7200bps selected |
|---------------------+--------------------------------------|
| %B9600 | 9600bps selected |
|---------------------+--------------------------------------|
| %B12000 | 12000bps selected |
|---------------------+--------------------------------------|
| í %B14400 | 14400bps selected |
+------------------------------------------------------------+
+------------------------------------------------------------+
| REPORT INFORMATION |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] In [cmds] |
|--------------+---------------------------------------------|
| Description: | Displays information requested |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| I0 | Reports product code |
|--------------+---------------------------------------------|
| I1 | Reports ROM checksum |
|--------------+---------------------------------------------|
| I2 | Reports ‘OK’ |
|--------------+---------------------------------------------|
| I3 | Reports a date code |