TEXT View Source
# BANKSIA TECHNOLOGY PTY. LTD.
MAC MODEM 144
Card Type Fax, Modem (asynchronous)
Chip Set Unidentified
Maximum Data Rate 14.4Kbps
Maximum Fax Rate 14.4Kbps
Data Bus External
Fax Class Class I & II
Data Modulation ITU-T V.21, V.22, V.22bis, V.32,
Protocol V.32bis
Fax Modulation ITU-T V.17, V.27ter, V.29
Protocol
Error MNP5, MNP10, V.42, V.42bis
Correction/Compression
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|------------------------------------------------------------|
| Line out | CN1 | DC power | CN4 |
|---------------------------+----------+--------------+------|
| Line in | CN2 | Power switch | SW1 |
|---------------------------+----------+--------------+------|
| RS-232/422 | CN3 | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED | Color | Status | Condition |
|------+-------+--------+------------------------------------|
| PWR | Red | On | Power is on |
|------+-------+--------+------------------------------------|
| PWR | Red | Off | Power is off |
|------+-------+--------+------------------------------------|
| OH | Red | On | Modem is off-hook |
|------+-------+--------+------------------------------------|
| OH | Red | Off | Modem is on-hook |
|------+-------+--------+------------------------------------|
| DTR | Red | On | DTR signal is high |
|------+-------+--------+------------------------------------|
| DTR | Red | Off | DTR signal is low |
|------+-------+--------+------------------------------------|
| DCD | Red | On | Carrier signal detected |
|------+-------+--------+------------------------------------|
| DCD | Red | Off | Carrier signal not detected |
|------+-------+--------+------------------------------------|
| CTS | Red | On | Modem ready to receive data |
|------+-------+--------+------------------------------------|
| CTS | Red | Off | Modem not ready to receive data |
|------+-------+--------+------------------------------------|
| RTS | Red | On | Computer ready to receive data |
|------+-------+--------+------------------------------------|
| RTS | Red | Off | Computer not ready to receive data |
|------+-------+--------+------------------------------------|
| RXD | Red | On | Modem is receiving data |
|------+-------+--------+------------------------------------|
| RXD | Red | Off | Modem is not receiving data |
|------+-------+--------+------------------------------------|
| TXD | Red | On | Modem is transmitting data |
|------+-------+--------+------------------------------------|
| TXD | Red | Off | Modem is not transmitting data |
|------+-------+--------+------------------------------------|
| AA | Red | On | Auto-answer enabled |
|------+-------+--------+------------------------------------|
| AA | Red | Off | Auto-answer disabled |
|------+-------+--------+------------------------------------|
| TST | Red | On | Modem in test mode |
|------+-------+--------+------------------------------------|
| TST | Red | Off | Modem not in test mode |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SUPPORTED COMMAND SET |
|------------------------------------------------------------|
| Basic AT Commands |
|------------------------------------------------------------|
| AT, ‘+++’, ‘Comma’, A/ |
|------------------------------------------------------------|
| A, B, E, H, I, L, M, N, O, P, Q, S, T, V, W, X, Y, Z |
|------------------------------------------------------------|
| &C, &D, &F, &G, &K, &L, &P, &S, &T, &V, &W, &Y, &Z |
|------------------------------------------------------------|
| Extended AT Commands |
|------------------------------------------------------------|
| \A, \B, \G, \L, %C, %L, %Q |
|------------------------------------------------------------|
| S Registers |
|------------------------------------------------------------|
| S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, |
| S14, S16, S18, S21, S22, S24, S25, S26 |
|------------------------------------------------------------|
| S29, S30, S31, S32, S33, S36, S37, S38, S39, S46, S48, |
| S82, S86, S91, S92, S95 |
|------------------------------------------------------------|
| Special Commands |
|------------------------------------------------------------|
| *H, -K, -Q, )M, @M, :E, +MS |
|------------------------------------------------------------|
| Note: See MHI Help file for full command documentation. |
+------------------------------------------------------------+
Proprietary AT Command Set
+------------------------------------------------------------+
| MODULATION SELECTION |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] Fn [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls line modulation unless automode is |
| | selected |
|------------------------------------------------------------|
| Command | Function |
|----------------+-------------------------------------------|
| F0 | Automode enabled |
|----------------+-------------------------------------------|
| F1 | Force V.21 or Bell103 (according to ATB |
| | command) at 300bps |
|----------------+-------------------------------------------|
| F2 | ‘OK’ returned |
|----------------+-------------------------------------------|
| F3 | Force V.23 75TX/1200RX originate or |
| | 1200TX/75RX answer FSK |
|----------------+-------------------------------------------|
| F4 | Force V.22 or Bell212A (according to ATB |
| | command) at 1200bps |
|----------------+-------------------------------------------|
| F5 | Force V.22bis or Bell2400 (according to |
| | ATB command) |
|----------------+-------------------------------------------|
| F6 | Force V.32 at 4800bps |
|----------------+-------------------------------------------|
| F7 | Force V.32 at 7200bps |
|----------------+-------------------------------------------|
| F8 | Force V.32 at 9600bps |
|----------------+-------------------------------------------|
| F9 | Force V.32bis at 12000bps |
|----------------+-------------------------------------------|
| F10 | Force V.32bis at 14400bps |
+------------------------------------------------------------+
For proprietary command summary, See BANKSIA TECHNOLOGY PTY., LTD.,
MAC MODEM 288.