TEXT View Source
# ACTIONTEC ELECTRONICS, INC.
56K X2 DATA/FAX
Card Type Modem (asynchronous)
Chipset Unidentified
Maximum Data Rate 56Kbps
Maximum Fax Rate 14.4Kbps
Data Modulation Bell 103A, 212A
ITU-T V.21, V.22, V.22bis, V.23, V.32,
V.32bis, V.34
U.S. Robotics x2
Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29
Error MNP5, V.42, V.42bis
Correction/Compression
Fax Class Class I
Data Bus 8-bit ISA
Card Size Full height, half length
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|----------------------+-------+---------------------+-------|
| Telephone line out | CN1 | Telephone line in | CN2 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Setting | Label | Position |
|----------------------------------------+-------+-----------|
| í Plug-N-Play enabled | J3/C | Open |
|----------------------------------------+-------+-----------|
| Plug-N-Play disabled | J3/C | Closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT ADDRESS SELECTION |
|------------------------------------------------------------|
| Setting | J3/A | J3/B |
|--------------------+-------------------+-------------------|
| 3F8h (COM1:) | Closed | Closed |
|--------------------+-------------------+-------------------|
| 2E8h (COM2:) | Open | Closed |
|--------------------+-------------------+-------------------|
| 3F8h (COM3:) | Closed | Open |
|--------------------+-------------------+-------------------|
| 2E8h (COM4:) | Open | Open |
|--------------------+-------------------+-------------------|
| í Plug-N-Play | Open | Open |
+------------------------------------------------------------+
+------------------------------------------------------------+
| INTERRUPT SELECTION |
|------------------------------------------------------------|
| Setting | J2/A | J2/B | J2/C | J2/D | J2/E |
|---------------+--------+--------+--------+--------+--------|
| 2 | Closed | Open | Open | Open | Open |
|---------------+--------+--------+--------+--------+--------|
| 3 | Open | Closed | Open | Open | Open |
|---------------+--------+--------+--------+--------+--------|
| 4 | Open | Open | Closed | Open | Open |
|---------------+--------+--------+--------+--------+--------|
| 5 | Open | Open | Open | Closed | Open |
|---------------+--------+--------+--------+--------+--------|
| 7 | Open | Open | Open | Open | Closed |
|---------------+--------+--------+--------+--------+--------|
| í Plug-N-Play | Open | Open | Open | Open | Open |
+------------------------------------------------------------+
+--------------------------------------------------------+
| SUPPORTED STANDARD COMMANDS |
|--------------------------------------------------------|
| Basic AT Commands |
|--------------------------------------------------------|
| +++, ‘comma’, A/ |
|--------------------------------------------------------|
| A, B, D, E, F, H, L, M, O, Q, V, X, Y, Z |
|--------------------------------------------------------|
| &C, &D, &F, &G, &P, &R, &S, &T, &W, &Z |
|--------------------------------------------------------|
| S-Registers |
|--------------------------------------------------------|
| The S-registers are unidentified. |
|--------------------------------------------------------|
| Note: See MHI help file for complete information. |
+--------------------------------------------------------+
+------------------------------------------------------------+
| BREAK TYPE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &Yn [cmds] |
|--------------+---------------------------------------------|
| Description: | Configures action of break signal. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| &Y0 | Break empties buffer. |
|--------------+---------------------------------------------|
| í &Y1 | Break empties buffer and is sent |
| | immediately. |
|--------------+---------------------------------------------|
| &Y2 | Break does not empty buffer and is sent |
| | immediately. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| COMPRESSION MODE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &Kn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the type of data compression that |
| | will be used. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| &K0 | Data compression disabled. |
|--------------+---------------------------------------------|
| í &K1 | Auto-detect compression mode. |
|--------------+---------------------------------------------|
| &K2 | Data compression enabled. |
|--------------+---------------------------------------------|
| &K3 | MNP5 data compression only enabled. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CONNECTION SPEED LOWER LIMIT |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &Un [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets slowest allowed connection speed if &N |
| | is set to 1 or higher. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| í &U0 | No minimum connect speed. |
|--------------+---------------------------------------------|
| &U1 | Set minimum connect speed to 300bps. |
|--------------+---------------------------------------------|
| &U2 | Set minimum connect speed to 1200bps. |
|--------------+---------------------------------------------|
| &U3 | Set minimum connect speed to 2400bps. |
|--------------+---------------------------------------------|
| &U4 | Set minimum connect speed to 4800bps. |
|--------------+---------------------------------------------|
| &U5 | Set minimum connect speed to 7200bps. |
|--------------+---------------------------------------------|
| &U6 | Set minimum connect speed to 9600bps. |
|--------------+---------------------------------------------|
| &U7 | Set minimum connect speed to 12Kbps. |
|--------------+---------------------------------------------|
| &U8 | Set minimum connect speed to 14.4Kbps. |
|--------------+---------------------------------------------|
| &U9 | Set minimum connect speed to 16.8Kbps. |
|--------------+---------------------------------------------|
| &U10 | Set minimum connect speed to 19.2Kbps. |
|--------------+---------------------------------------------|
| &U11 | Set minimum connect speed to 21.6Kbps. |
|--------------+---------------------------------------------|
| &U12 | Set minimum connect speed to 24Kbps. |
|--------------+---------------------------------------------|
| &U13 | Set minimum connect speed to 26.4Kbps. |
|--------------+---------------------------------------------|
| &U14 | Set minimum connect speed to 28.8Kbps. |
|--------------+---------------------------------------------|
| &U15 | Set minimum connect speed to 31.2Kbps. |
|--------------+---------------------------------------------|
| &U16 | Set minimum connect speed to 33.6Kbps. |
|--------------+---------------------------------------------|
| &U17 | Set minimum connect speed to 33.3Kbps. |
|--------------+---------------------------------------------|
| &U18 | Set minimum connect speed to 37.3Kbps. |
|--------------+---------------------------------------------|
| &U19 | Set minimum connect speed to 41.3Kbps. |
|--------------+---------------------------------------------|
| &U20 | Set minimum connect speed to 42.6Kbps. |
|--------------+---------------------------------------------|
| &U21 | Set minimum connect speed to 44Kbps. |
|--------------+---------------------------------------------|
| &U22 | Set minimum connect speed to 45.3Kbps. |
|--------------+---------------------------------------------|
| &U23 | Set minimum connect speed to 46.6Kbps. |
|--------------+---------------------------------------------|
| &U24 | Set minimum connect speed to 48Kbps. |
|--------------+---------------------------------------------|
| &U25 | Set minimum connect speed to 49.3Kbps. |
|--------------+---------------------------------------------|
| &U26 | Set minimum connect speed to 50.6Kbps. |
|--------------+---------------------------------------------|
| &U27 | Set minimum connect speed to 52Kbps. |
|--------------+---------------------------------------------|
| &U28 | Set minimum connect speed to 53.3Kbps. |
|--------------+---------------------------------------------|
| &U29 | Set minimum connect speed to 54.6Kbps. |
|--------------+---------------------------------------------|
| &U30 | Set minimum connect speed to 56Kbps. |
|--------------+---------------------------------------------|
| &U31 | Set minimum connect speed to 57.3Kbps. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CONNECTION SPEED UPPER LIMIT |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &Nn [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets required connection speed if &U is set |
| | to 0; otherwise, sets fastest allowed |
| | connection speed. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| í &N0 | No maximum connect speed. |
|--------------+---------------------------------------------|
| &N1 | Set maximum connect speed to 300bps. |
|--------------+---------------------------------------------|
| &N2 | Set maximum connect speed to 1200bps. |
|--------------+---------------------------------------------|
| &N3 | Set maximum connect speed to 2400bps. |
|--------------+---------------------------------------------|
| &N4 | Set maximum connect speed to 4800bps. |
|--------------+---------------------------------------------|
| &N5 | Set maximum connect speed to 7200bps. |
|--------------+---------------------------------------------|
| &N6 | Set maximum connect speed to 9600bps. |
|--------------+---------------------------------------------|
| &N7 | Set maximum connect speed to 12Kbps. |
|--------------+---------------------------------------------|
| &N8 | Set maximum connect speed to 14.4Kbps. |
|--------------+---------------------------------------------|
| &N9 | Set maximum connect speed to 16.8Kbps. |
|--------------+---------------------------------------------|
| &N10 | Set maximum connect speed to 19.2Kbps. |
|--------------+---------------------------------------------|
| &N11 | Set maximum connect speed to 21.6Kbps. |
|--------------+---------------------------------------------|
| &N12 | Set maximum connect speed to 24Kbps. |
|--------------+---------------------------------------------|
| &N13 | Set maximum connect speed to 26.4Kbps. |
|--------------+---------------------------------------------|
| &N14 | Set maximum connect speed to 28.8Kbps. |
|--------------+---------------------------------------------|
| &N15 | Set maximum connect speed to 31.2Kbps. |
|--------------+---------------------------------------------|
| &N16 | Set maximum connect speed to 33.6Kbps. |
|--------------+---------------------------------------------|
| &N17 | Set maximum connect speed to 33.3Kbps. |
|--------------+---------------------------------------------|
| &N18 | Set maximum connect speed to 37.3Kbps. |
|--------------+---------------------------------------------|
| &N19 | Set maximum connect speed to 41.3Kbps. |
|--------------+---------------------------------------------|
| &N20 | Set maximum connect speed to 42.6Kbps. |
|--------------+---------------------------------------------|
| &N21 | Set maximum connect speed to 44Kbps. |
|--------------+---------------------------------------------|
| &N22 | Set maximum connect speed to 45.3Kbps. |
|--------------+---------------------------------------------|
| &N23 | Set maximum connect speed to 46.6Kbps. |
|--------------+---------------------------------------------|
| &N24 | Set maximum connect speed to 48Kbps. |
|--------------+---------------------------------------------|
| &N25 | Set maximum connect speed to 49.3Kbps. |
|--------------+---------------------------------------------|
| &N26 | Set maximum connect speed to 50.6Kbps. |
|--------------+---------------------------------------------|
| &N27 | Set maximum connect speed to 52Kbps. |
|--------------+---------------------------------------------|
| &N28 | Set maximum connect speed to 53.3Kbps. |
|--------------+---------------------------------------------|
| &N29 | Set maximum connect speed to 54.6Kbps. |
|--------------+---------------------------------------------|
| &N30 | Set maximum connect speed to 56Kbps. |
|--------------+---------------------------------------------|
| &N31 | Set maximum connect speed to 57.3Kbps. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DISPLAY INFORMATION |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] In [cmds] |
|--------------+---------------------------------------------|
| Description: | Displays modem properties. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| I0 | Displays product identification code. |
|--------------+---------------------------------------------|
| I1 | Tests and displays ROM checksum result. |
|--------------+---------------------------------------------|
| I2 | Tests and displays RAM checksum result. |
|--------------+---------------------------------------------|
| I3 | Displays product identification. |
|--------------+---------------------------------------------|
| I4 | Displays current command settings. |
|--------------+---------------------------------------------|
| I5 | Displays current NVRAM settings. |
|--------------+---------------------------------------------|
| I6 | Displays current connection’s statistics. |
|--------------+---------------------------------------------|
| I7 | Displays product configuration. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| ERROR CORRECTION MODE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &Mn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects active error correction protocols. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| &M0 | Normal mode only. |
|--------------+---------------------------------------------|
| í &M4 | Auto-detect mode. |
|--------------+---------------------------------------------|
| &M5 | Error correction mode only. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| EXTENDED RESULT CODES |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &An [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects extended result codes. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| &A0 | Extended result codes disabled. |
|--------------+---------------------------------------------|
| &A1 | Error correction result codes enabled. |
|--------------+---------------------------------------------|
| &A2 | V.32 result code enabled. |
|--------------+---------------------------------------------|
| í &A3 | Error correction and compression result |
| | codes enabled. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FLOW CONTROL - MODEM-TO-MODEM |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &In [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the type of modem-to-modem flow |
| | control used. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| í &I0 | Software flow control disabled. |
|--------------+---------------------------------------------|
| &I1 | XON/XOFF pass-through enabled. |
|--------------+---------------------------------------------|
| &I2 | XON/XOFF pass-through disabled. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FLOW CONTROL TYPE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &Hn [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets type of flow control used by modem. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| &H0 | Flow control disabled. |
|--------------+---------------------------------------------|
| í &H1 | CTS/RTS flow control enabled. |
|--------------+---------------------------------------------|
| &H2 | XON/XOFF flow control enabled. |
|--------------+---------------------------------------------|
| &H3 | CTS/RTS and XON/XOFF flow control enabled. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| LOCK SERIAL PORT |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &Bn [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets operation of serial port speed. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| &B0 | Serial speed follows connect speed. |
|--------------+---------------------------------------------|
| í &B1 | Serial speed locked. |
|--------------+---------------------------------------------|
| &B2 | Serial speed locked in error correction |
| | mode only. |
+------------------------------------------------------------+