TEXT View Source
# GLOBAL VILLAGE COMMUNICATIONS
POWERPORT PLATINUM PRO
Card Type Modem (asynchronous), Ethernet
Chipset Unidentified
Boot ROM Not available
Network Transfer Rate 10Mbps
Topology Star
Wire Type Unshielded twisted pair
Maximum Data Rate 28.8Kbps
Maximum Fax Rate 14.4Kbps
Data Modulation Bell 103A/212A
ITU-T V.21, V.22, V.22bis, V.23, V.32,
V.32bis, V.34
Rockwell V.FC
Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29
Error MNP5, MNP10EC, V.42, V.42bis
Correction/Compression
Fax Class Class I
Data Bus PCMCIA Type II
53175
+------------------------------------------------------------+
| SUPPORTED STANDARD COMMANDS |
|------------------------------------------------------------|
| Basic AT Commands |
|------------------------------------------------------------|
| +++, ‘comma’, A/ |
|------------------------------------------------------------|
| A, D, E, H, M, N, O, V, W, X, Y, Z |
|------------------------------------------------------------|
| &F, &L, &P, &Q, &V, &W, &Y, &Z |
|------------------------------------------------------------|
| Extended AT Commands |
|------------------------------------------------------------|
| \B, \G, \K, \N, \T, \V, \X |
|------------------------------------------------------------|
| %C |
|------------------------------------------------------------|
| S-Registers |
|------------------------------------------------------------|
| S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, |
| S36, S38, S46, S48, S95 |
|------------------------------------------------------------|
| Note: See MHI help file for complete information. |
+------------------------------------------------------------+
Proprietary AT Command Set
+------------------------------------------------------------+
| COMMUNICATION PROTOCOLS |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] Bn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the communication protocol for |
| | low-speed data calls. |
|--------------+---------------------------------------------|
| Command | Protocol |
|--------------+---------------------------------------------|
| B0 | Modem will use ITU-T V.22 at 1200bps or |
| | 600bps and V.21 at 300bps. |
|--------------+---------------------------------------------|
| í B1 | Modem will use Bell 212A at 1200bps and |
| | 103A at 300bps. |
|--------------+---------------------------------------------|
| B2 | Modem will use ITU-T V.23 at 1200/75bps. |
|--------------+---------------------------------------------|
| B3 | Modem will use ITU-T V.23 at 75/1200bps. |
|--------------+---------------------------------------------|
| B4 | Modem will use ITU-T V.23 at 600/75bps. |
|--------------+---------------------------------------------|
| B5 | Modem will use ITU-T V.23 at 75/600bps. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DISPLAY INFORMATION |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] In [cmds] |
|--------------+---------------------------------------------|
| Description: | Displays information requested about the |
| | modem. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| I0 | Displays manufacturer and model |
| | information. |
|--------------+---------------------------------------------|
| I1 | Displays ROM checksum. |
|--------------+---------------------------------------------|
| I2 | Tests and reports ROM checksum. |
|--------------+---------------------------------------------|
| I3 | Displays product identification code and |
| | version. |
|--------------+---------------------------------------------|
| I4 | Displays modem capabilities. |
|--------------+---------------------------------------------|
| I5 | Displays version of DSP chip. |
|--------------+---------------------------------------------|
| I6 | Displays DSP checksum. |
|--------------+---------------------------------------------|
| I7 | Displays release date of firmware. |
|--------------+---------------------------------------------|
| I8 | Displays frequency of the controller clock. |
|--------------+---------------------------------------------|
| I9 | Displays sync frequency of the DSP chip. |
|--------------+---------------------------------------------|
| I10 | Displays DAA type. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| LINE SPEED |
|------------------------------------------------------------|
| Type: | Register |
|--------------+---------------------------------------------|
| Format | AT [cmds] S37=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the maximum allowable data exchange |
| | rate attempted during handshake process. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| í S37=0 | Speed of last connection |
|--------------+---------------------------------------------|
| S37=3 | Set speed to 300bps. |
|--------------+---------------------------------------------|
| S37=4 | Set speed to 600bps. |
|--------------+---------------------------------------------|
| S37=5 | Set speed to 1200bps. |
|--------------+---------------------------------------------|
| S37=6 | Set speed to 2400bps. |
|--------------+---------------------------------------------|
| S37=7 | Set speed to 4800bps. |
|--------------+---------------------------------------------|
| S37=8 | Set speed to 7200bps. |
|--------------+---------------------------------------------|
| S37=9 | Set speed to 9600bps. |
|--------------+---------------------------------------------|
| S37=10 | Set speed to 12Kbps. |
|--------------+---------------------------------------------|
| S37=11 | Set speed to 14.4Kbps. |
|--------------+---------------------------------------------|
| S37=12 | Set speed to 16.8Kbps. |
|--------------+---------------------------------------------|
| S37=13 | Set speed to 19.2Kbps. |
|--------------+---------------------------------------------|
| S37=14 | Set speed to 21.6Kbps. |
|--------------+---------------------------------------------|
| S37=15 | Set speed to 24Kbps. |
|--------------+---------------------------------------------|
| S37=16 | Set speed to 26.4Kbps. |
|--------------+---------------------------------------------|
| S37=17 | Set speed to 28.8Kbps. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MNP10EC MODE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] -SEC=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects whether the modem will attempt to |
| | use MNP10EC mode during the handshaking |
| | sequence. |
|------------------------------------------------------------|
| Command | Function |
|-----------------+------------------------------------------|
| -SEC=0 | MNP10EC handshaking disabled unless a |
| | V.34 connection is attempted via a |
| | cellular line. |
|-----------------+------------------------------------------|
| í -SEC=1 | MNP10EC handshaking enabled. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| RESULT CODES |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] Qn [cmds] |
|--------------+---------------------------------------------|
| Description: | Enables modem to send result codes to the |
| | DTE. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| í Q0 | Result codes enabled. |
|--------------+---------------------------------------------|
| Q1 | Result codes disabled. |
|--------------+---------------------------------------------|
| Q2 | Result codes enabled in originate mode |
| | only. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| TRELLIS CODING |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &Un [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects whether the modem will use trellis |
| | coding. |
|------------------------------------------------------------|
| Command | Function |
|-----------------------+------------------------------------|
| í &U0 | Trellis coding enabled. |
|-----------------------+------------------------------------|
| &U1 | Trellis coding disabled. |