TEXT View Source
# MOTOROLA, INC.
HMTA 200 V.32BIS
Card Type ISDN TA
Chip Set Motorola
ISDN Transfer Rate 64Kbps x 2
Maximum Modem Rate 14.4Kbps
Maximum Fax Rate 14.4Kbps
Fax Class Unidentified
Data Bus External
ISDN Protocol V.120, PPP, AIMux, Bonding
Data Modulation Bell 103A/212A
Protocol
ITU-T V.21, V.22bis, V.23, V.32,
V.32bis
Fax Modulation Unidentified
Protocol
Switch Type 5ESS, DMS-100, NI-1
Error MNP5, V.42bis
Correction/Compression
Proprietary AT Command Set
V2152
+------------------------------------------------------------+
| AUTO-RELIABLE BUFFER |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Cn [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the behaviour of the buffer during |
| | auro-reliable negotiation. |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| í \C0 | Auto-reliable buffer disabled. |
|---------------+--------------------------------------------|
| \C1 | Modem will buffer data for four seconds or |
| | 200 bytes. |
|---------------+--------------------------------------------|
| \C2 | Modem will fall back to normal mode if |
| | fallback character received. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BEARER CALL - 3.1KHz AUDIO |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %A94=x [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects how the TA will answer an incoming |
| | 3.1KHz audio BC call. |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| %A94=D | TA will not answer 3.1KHz audio BC calls. |
|---------------+--------------------------------------------|
| %A94=E | TA will answer 3.1KHz audio BC calls as |
| | ISDN. |
|---------------+--------------------------------------------|
| í %A94=M | TA will answer 3.1KHz audio BC calls with |
| | the modem. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BEARER CALL - DATA |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %A95=x [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects how the TA will answer an incoming |
| | data BC call. |
|------------------------------------------------------------|
| Command | Function |
|-----------------+------------------------------------------|
| %A93=D | TA will not answer data BC calls. |
|-----------------+------------------------------------------|
| í %A93=E | TA will answer data BC calls as ISDN. |
|-----------------+------------------------------------------|
| %A93=M | TA will answer data BC calls with the |
| | modem. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| BEARER CALL - SPEECH |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %A93=x [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects how the TA will answer an incoming |
| | speech BC call. |
|------------------------------------------------------------|
| Command | Function |
|----------------+-------------------------------------------|
| %A93=D | TA will not answer speech BC calls. |
|----------------+-------------------------------------------|
| %A93=E | TA will answer speech BC calls as ISDN. |
|----------------+-------------------------------------------|
| í %A93=M | TA will answer speech BC calls with the |
| | modem. |
+------------------------------------------------------------+
+----------------------------------------------------------------+
| BREAK TYPE |
|----------------------------------------------------------------|
|Type: |Configuration |
|------------------+---------------------------------------------|
|Format: |AT [cmds] \Kn [cmds] |
|------------------+---------------------------------------------|
|Description: |Configures action of break signal. |
|----------------------------------------------------------------|
| Command |Break from DTE | Break from | Modem | Break from |
| | | DTE |receives \B |remote modem|
| |Reliable/Normal| | | |
| | mode |Direct mode | | |
|---------+---------------+------------+------------+------------|
| \K0 |Enter command |Send break |Buffers |Buffers |
| |mode, do not |to remote |cleared and |cleared and |
| |send break to |modem |break sent |break sent |
| |remote modem. |immediately,|to remote |to DTE. |
| | |then enter |modem. | |
| | |command | | |
| | |mode. | | |
|---------+---------------+------------+------------+------------|
| \K1 |Buffers cleared|Send break |Buffers |Buffers |
| |and break sent |to remote |cleared and |cleared and |
| |to remote |modem |break sent |break sent |
| |modem. |immediately.|to remote |to DTE. |
| | | |modem. | |
|---------+---------------+------------+------------+------------|
| \K2 |Enter command |Send break |Send break |Send break |
| |mode, do not |to remote |to remote |to DTE |
| |send break to |modem |modem |immediately.|
| |remote modem. |immediately,|immediately.| |
| | |then enter | | |
| | |command | | |
| | |mode. | | |
|---------+---------------+------------+------------+------------|
| \K3 |Send break to |Send break |Send break |Send break |
| |remote modem |to remote |to remote |to DTE |
| |immediately. |modem |modem |immediately.|
| | |immediately.|immediately.| |
|---------+---------------+------------+------------+------------|
| \K4 |Enter command |Send break |Send break |Break sent |
| |mode, do not |to remote |to remote |with |
| |send break to |modem |modem with |received |
| |remote modem. |immediately,|transmitted |data to the |
| | |then enter |data. |DTE. |
| | |command | | |
| | |mode. | | |
|---------+---------------+------------+------------+------------|
| í \K5 |Send break with|Send break |Send break |Break sent |
| |transmitted |to remote |to remote |with |
| |data. |modem |modem with |received |
| | |immediately.|transmitted |data to the |
| | | |data. |DTE. |
+----------------------------------------------------------------+
+------------------------------------------------------------+
| CALLER ID |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] @N0=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Enables the Caller ID function. |
|------------------------------------------------------------|
| Command | Function |
|----------------------+-------------------------------------|
| í @N0=0 | Caller ID disabled. |
|----------------------+-------------------------------------|
| @N0=1 | Caller ID enabled. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CALLER ID LOG |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] @Ln [cmds] |
|--------------+---------------------------------------------|
| Description: | Allows the user to view and clear the |
| | Caller ID log. |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| @L0 | Clears the Caller ID log. |
|---------------+--------------------------------------------|
| @L1 | View the last entry in the Caller ID log. |
|---------------+--------------------------------------------|
| @L2 | View the last ten entries in the Caller ID |
| | log. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| CD SIGNAL |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &Cn [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls the behaviour of the CD signal. |
|------------------------------------------------------------|
| Command | Function |
|---------------------+--------------------------------------|
| í &C0 | CD forced high. |
|---------------------+--------------------------------------|
| &C1 | CD normal. |
|---------------------+--------------------------------------|
| &C2 | CD forced low on disconnect. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| COMMAND SET |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] @P1=x [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the command set that will be used. |
|------------------------------------------------------------|
| Command | Function |
|----------------+-------------------------------------------|
| @P1=A | AT command set enabled. |
|----------------+-------------------------------------------|
| @P1=N | Command sets disabled. |
|----------------+-------------------------------------------|
| @P1=VB | V.25bis command set enabled in Bisync |
| | mode. |
|----------------+-------------------------------------------|
| @P1=VH | V.25bis command set enabled in HDLC mode. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| COMPRESSION |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %Cn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects how the modem will compress data. |
|------------------------------------------------------------|
| Command | Function |
|-----------------+------------------------------------------|
| %C0 | Compression disabled. |
|-----------------+------------------------------------------|
| %C1 | Compression enabled. |
|-----------------+------------------------------------------|
| %C2 | Compression enabled on transmit only. |
|-----------------+------------------------------------------|
| %C3 | Compression enabled on receive only. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| COMPRESSION/ERROR CORRECTION MODE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Nn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the types of compression and error |
| | correction that will be attempted. |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| \N0 | Normal mode only, compression and error |
| | correction disabled. |
|---------------+--------------------------------------------|
| \N1 | Direct mode only, compression and error |
| | correction disabled. |
|---------------+--------------------------------------------|
| \N2 | MNP attempted, modem will disconnect if |
| | MNP connection fails. |
|---------------+--------------------------------------------|
| \N3 | MNP attempted, modem will attempt normal |
| | mode if MNP connection fails. |
|---------------+--------------------------------------------|
| \N4 | LAPM attempted, modem will disconnect if |
| | LAPM connection fails. |
|---------------+--------------------------------------------|
| \N5 | LAPM attempted, modem will attempt normal |
| | mode if LAPM connection fails. |
|---------------+--------------------------------------------|
| \N6 | LAPM attempted, then MNP, modem will |
| | disconnect if both previous connections |
| | fail. |
|---------------+--------------------------------------------|
| \N7 | LAPM attempted, then MNP, modem will |
| | attempt normal mode if both previous |
| | connections fail. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DATA LENGTH |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] @P4=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the length of the data word. |
|------------------------------------------------------------|
| Command | Function |
|------------------------+-----------------------------------|
| @P4=7 | 7 bit word length. |
|------------------------+-----------------------------------|
| í @P4=8 | 8 bit word length. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DATA PARITY |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] @P3=x [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the format of the parity bit. |
|------------------------------------------------------------|
| Command | Function |
|----------------------------+-------------------------------|
| @P3=E | Even parity. |
|----------------------------+-------------------------------|
| @P3=M | Mark parity. |
|----------------------------+-------------------------------|
| í @P3=N | No parity. |
|----------------------------+-------------------------------|
| @P3=O | Odd parity. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DATA STOP |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] @P6=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the number of stop bits. |
|------------------------------------------------------------|
| Command | Function |
|-------------------+----------------------------------------|
| í @P6=0 | One stop bit. |
|-------------------+----------------------------------------|
| @P6=1 | One and a half stop bits. |
|-------------------+----------------------------------------|
| @P6=2 | Two stop bits. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAL MODE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %A97=x [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects what type of dialing the TA will |
| | use. |
|------------------------------------------------------------|
| Command | Function |
|------------------------+-----------------------------------|
| í %A97=E | En bloc dialing enabled. |
|------------------------+-----------------------------------|
| %A97=O | Overlap dialing enabled. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIRECTORY NUMBER 1 SET |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT !N1=<#> |
| | |
| | AT [cmds] !N1="<#>" [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the first directory number. The number |
| | must be surrounded by single or double |
| | quotes if there are more commands on the |
| | line. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIRECTORY NUMBER 2 SET |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT !N2=<#> |
| | |
| | AT [cmds] !N2="<#>" [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the first directory number. The number |
| | must be surrounded by single or double |
| | quotes if there are more commands on the |
| | line. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DISCONNECT BUFFER TIME |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %Dn [cmds] |
|--------------+---------------------------------------------|
| Default: | 0 |
|--------------+---------------------------------------------|
| Range: | 0 - 255 |
|--------------+---------------------------------------------|
| Unit: | 1 second |
|--------------+---------------------------------------------|
| Description: | Sets the time that the modem will wait to |
| | disconnect if there is data in its buffers. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DISPLAY CONFIGURATION |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] >V=x [cmds] |
|--------------+---------------------------------------------|
| Description: | Displays information about the current |
| | configuration. |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| >V=C | Displays directory numbers, SPIDs, and |
| | TEIs. |
|---------------+--------------------------------------------|
| >V=G | Displays complete configuration. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DISPLAY CONFIGURATION |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &V=x[n] [cmds] |
|--------------+---------------------------------------------|
| Description: | Displays information about the current |
| | configuration. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| &V | Displays current and stored profiles. |
|--------------+---------------------------------------------|
| &V=Bn | Displays X.25 session n. |
|--------------+---------------------------------------------|
| &V=E | Displays V.120 CSD information. |
|--------------+---------------------------------------------|
| &V=Ln | Displays local X.25 session n. |
|--------------+---------------------------------------------|
| &V=Rn | Displays remote X.25 session n. |
|--------------+---------------------------------------------|
| &V=Z | Displays stored phone numbers. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DISPLAY FIRMWARE VERSION |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %Vn [cmds] |
|--------------+---------------------------------------------|
| Description: | Displays the version of the installed |
| | firmware. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DISPLAY PRODUCT INFORMATION |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] In [cmds] |
|--------------+---------------------------------------------|
| Description: | Displays information about the TA. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| I0 | Displays product identification. |
|--------------+---------------------------------------------|
| I1 | Displays ROM checksum. |
|--------------+---------------------------------------------|
| I2 | Displays ROM checksum response. |
|--------------+---------------------------------------------|
| I3 | Displays firmware version. |
|--------------+---------------------------------------------|
| I4 | Displays modem capability in numeric form. |
|--------------+---------------------------------------------|
| I8 | Displays modem capability in verbose form. |
|--------------+---------------------------------------------|
| I9 | Displays Plug-And-Play ID. |
|--------------+---------------------------------------------|
| I10 | Displays ISDN link status. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DTR AUTODIAL |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &Ln [cmds] |
|--------------+---------------------------------------------|
| Description: | Causes the TA to repeatedly dial the first |
| | stored number on high DTR until it |
| | connects. |
|------------------------------------------------------------|
| Command | Function |
|-----------------------+------------------------------------|
| í &L0 | DTR autodialing disabled. |
|-----------------------+------------------------------------|
| &L1 | DTR autodialing enabled. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DTR CHANGE TIME |
|------------------------------------------------------------|
| Type: | Register |
|--------------+---------------------------------------------|
| Format: | AT [cmds] S25=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 5 |
|--------------+---------------------------------------------|
| Range: | 0 - 255 |
|--------------+---------------------------------------------|
| Unit: | 10ms |
|--------------+---------------------------------------------|
| Description: | Sets the amount of time the DTR signal must |
| | be low before it is recognised. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DTR SIGNAL |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &Dn [cmds] |
|--------------+---------------------------------------------|
| Description: | Controls the behaviour of the DTR signal. |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| &D0 | DTR forced high. |
|---------------+--------------------------------------------|
| &D1 | TA enters command mode when DTR goes low. |
|---------------+--------------------------------------------|
| &D2 | TA hangs up and returns to command mode on |
| | low DTR. |
|---------------+--------------------------------------------|
| &D3 | TA resets on low DTR. |
|---------------+--------------------------------------------|
| &D9 | TA dials first stored number on high DTR, |
| | hangs up and returns to command mode on |
| | low DTR. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| ECHO CANCELLER DISABLE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %A96=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects whether the TA will send a tone to |
| | disable the echo canceller. |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| í %A96=0 | TA will not send echo canceller disable |
| | tone. |
|---------------+--------------------------------------------|
| %A96=1 | TA will send echo canceller disable tone. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| EXTENDED RESULT CODES - MODEM |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Vn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects which speed the modem will display |
| | for connect messages. |
|------------------------------------------------------------|
| Command | Function |
|----------------+-------------------------------------------|
| \V0 | Display serial port speed only. |
|----------------+-------------------------------------------|
| \V1 | Display serial port speed and error |
| | correction protocol. |
|----------------+-------------------------------------------|
| \V2 | Display line speed only. |
|----------------+-------------------------------------------|
| \V3 | Display line speed and error correction |
| | protocol. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| EXTENDED RESULT CODES - ISDN |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] Wn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects whether the TA will send extended |
| | protocol and channel result codes. |
|------------------------------------------------------------|
| Command | Function |
|-------------------+----------------------------------------|
| í W0 | Extended result codes disabled. |
|-------------------+----------------------------------------|
| W1 | Extended result codes enabled. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FLOW CONTROL - MODEM-TO-MODEM |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Gn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects whether the local and remote modems |
| | may use flow control. |
|------------------------------------------------------------|
| Command | Function |
|------------------+-----------------------------------------|
| í \G0 | Modem-to-modem XON/XOFF flow control |
| | disabled. |
|------------------+-----------------------------------------|
| \G1 | Modem-to-modem XON/XOFF flow control |
| | enabled. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FLOW CONTROL TYPE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Qn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the type of flow control that will |
| | be used. |
|------------------------------------------------------------|
| Command | Function |
|------------------+-----------------------------------------|
| \Q0 | Flow control disabled. |
|------------------+-----------------------------------------|
| \Q1 | Bidirectional XON/XOFF flow control |
| | enabled. |
|------------------+-----------------------------------------|
| \Q2 | CTS flow control enabled. |
|------------------+-----------------------------------------|
| í \Q3 | RTS/CTS flow control enabled. |
|------------------+-----------------------------------------|
| \Q4 | Unidirectional XON/XOFF flow control |
| | enabled. |
|------------------------------------------------------------|
| Note: Unidirectional XON/XOFF is valid for ISDN |
| operation only. If this mode is used while operating |
| the modem it will not function properly. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| FRONT PANEL LOCK |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] >Ln [cmds] |
|--------------+---------------------------------------------|
| Description: | Prevents front panel configuration changes. |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| í >L0 | All actions allowed from front panel. |
|---------------+--------------------------------------------|
| >L1 | Configuration changes from front panel not |
| | allowed. |
|---------------+--------------------------------------------|
| >L2 | No actions allowed from front panel. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| INACTIVITY TIMER |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Tn [cmds] |
|--------------+---------------------------------------------|
| Default: | 0 |
|--------------+---------------------------------------------|
| Range: | 0 - 90 |
|--------------+---------------------------------------------|
| Unit: | 1 minute |
|--------------+---------------------------------------------|
| Description: | Sets the amount of time that the modem must |
| | be idle before it will disconnect. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| LINE SPEED - MAXIMUM |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %Bn [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the maximum speed the modem will |
| | connect at. |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| %B0 | Modem will connect only at DCE speed. |
|---------------+--------------------------------------------|
| %B300 | Modem will connect only at 300bps. |
|---------------+--------------------------------------------|
| %B1200 | 1200bps maximum connect speed. |
|---------------+--------------------------------------------|
| %B2400 | 2400bps maximum connect speed. |
|---------------+--------------------------------------------|
| %B4800 | 4800bps maximum connect speed. |
|---------------+--------------------------------------------|
| %B7200 | 7200bps maximum connect speed. |
|---------------+--------------------------------------------|
| %B9600 | 9600bps maximum connect speed. |
|---------------+--------------------------------------------|
| %B9600C | 9600bps maximum connect speed with trellis |
| | coding. |
|---------------+--------------------------------------------|
| %B12000 | 12Kbps maximum connect speed. |
|---------------+--------------------------------------------|
| í %B14400 | 14.4Kbps maximum connect speed. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| LOAD STORED PROFILE |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] Zn [cmds] |
|--------------+---------------------------------------------|
| Description: | Loads the configuration of the TA from the |
| | stored profile except for ISDN settings. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| LOAD STORED PROFILE - FULL |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] >Zn [cmds] |
|--------------+---------------------------------------------|
| Description: | Loads the complete configuration of the TA |
| | from the stored profile. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| LOCAL SERIAL PORT SPEED |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] @P2=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the speed of operation for the serial |
| | port. |
|------------------------------------------------------------|
| Command | Function |
|------------------+-----------------------------------------|
| @P2=300 | Set serial port speed to 300bps. |
|------------------+-----------------------------------------|
| @P2=600 | Set serial port speed to 600bps. |
|------------------+-----------------------------------------|
| @P2=1200 | Set serial port speed to 1200bps. |
|------------------+-----------------------------------------|
| @P2=2400 | Set serial port speed to 2400bps. |
|------------------+-----------------------------------------|
| @P2=4800 | Set serial port speed to 4800bps. |
|------------------+-----------------------------------------|
| @P2=7200 | Set serial port speed to 7200bps. |
|------------------+-----------------------------------------|
| @P2=9600 | Set serial port speed to 9600bps. |
|------------------+-----------------------------------------|
| @P2=12000 | Set serial port speed to 12Kbps. |
|------------------+-----------------------------------------|
| @P2=14400 | Set serial port speed to 14.4Kbps. |
|------------------+-----------------------------------------|
| @P2=19200 | Set serial port speed to 19.2Kbps. |
|------------------+-----------------------------------------|
| @P2=28800 | Set serial port speed to 28.8Kbps. |
|------------------+-----------------------------------------|
| @P2=38400 | Set serial port speed to 38.4Kbps. |
|------------------+-----------------------------------------|
| @P2=48000 | Set serial port speed to 48Kbps. |
|------------------+-----------------------------------------|
| @P2=56000 | Set serial port speed to 56Kbps. |
|------------------+-----------------------------------------|
| í @P2=57600 | Set serial port speed to 57.6Kbps. |
|------------------+-----------------------------------------|
| @P2=64000 | Set serial port speed to 64Kbps. |
|------------------+-----------------------------------------|
| @P2=112000 | Set serial port speed to 112Kbps. |
|------------------+-----------------------------------------|
| @P2=115200 | Set serial port speed to 115.2Kbps. |
|------------------+-----------------------------------------|
| @P2=128000 | Set serial port speed to 128Kbps. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| LOCK SERIAL PORT SPEED |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Jn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects whether the serial port speed will |
| | be matched to the line speed. |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| í \J0 | Serial port speed locked. |
|---------------+--------------------------------------------|
| \J1 | Serial port speed will match line speed. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MNP BLOCK SIZE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \An [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the maximum size of a block in MNP |
| | mode. |
|------------------------------------------------------------|
| Command | Function |
|--------------------+---------------------------------------|
| \A0 | Maximum block size is 64 bytes. |
|--------------------+---------------------------------------|
| \A1 | Maximum block size is 128 bytes. |
|--------------------+---------------------------------------|
| \A2 | Maximum block size is 192 bytes. |
|--------------------+---------------------------------------|
| \A3 | Maximum block size is 256 bytes. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| ORIGINATE CALL - ISDN |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %A98=Ix [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects what bearer capability the TA will |
| | originate ISDN calls with. |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| %A98=I | Originate ISDN calls as data BC. |
|---------------+--------------------------------------------|
| %A98=IA | Originate ISDN calls as 3.1KHz audio BC. |
|---------------+--------------------------------------------|
| í %A98=ID | Originate ISDN calls as data BC. |
|---------------+--------------------------------------------|
| %A98=IS | Originate ISDN calls as speech BC. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| ORIGINATE CALL - MODEM |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %A98=Mx [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects what bearer capability the TA will |
| | originate modem calls with. |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| %A98=M | Originate modem calls as 3.1KHz audio BC. |
|---------------+--------------------------------------------|
| í %A98=MA | Originate modem calls as 3.1KHz audio BC. |
|---------------+--------------------------------------------|
| %A98=MD | Originate modem calls as data BC. |
|---------------+--------------------------------------------|
| %A98=MS | Originate modem calls as speech BC. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| PROTOCOL |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %A2=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the protocol that the TA uses for rate |
| | adaptation. |
|------------------------------------------------------------|
| Command | Function |
|-------------------+----------------------------------------|
| %A2=0 | TA will use clear channel mode. |
|-------------------+----------------------------------------|
| í %A2=2 | TA will use V.120 protocol. |
|-------------------+----------------------------------------|
| %A2=3 | TA will use Bonding Mode 1 or AIMux |
| | protocols. |
|-------------------+----------------------------------------|
| %A2=95 | TA will use PPP protocol. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| RESET TO FACTORY DEFAULTS |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &F [cmds] |
|--------------+---------------------------------------------|
| Description: | Resets the configuration of the TA except |
| | for ISDN settings to the factory defaults. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| RESET TO FACTORY DEFAULT - FULL |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] >F [cmds] |
|--------------+---------------------------------------------|
| Description: | Resets the complete configuration of the TA |
| | to the factory defaults. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| RETRAIN |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] On |
|--------------+---------------------------------------------|
| Description: | When connected, tells the modem to go back |
| | online and initiate a retrain. |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| O0 | Return online without retrain. |
|---------------+--------------------------------------------|
| O1 | Return online with retrain. |
|---------------+--------------------------------------------|
| O4800 | Return online and negotiate to 4800bps. |
|---------------+--------------------------------------------|
| O7200 | Return online and negotiate to 7200bps. |
|---------------+--------------------------------------------|
| O9600 | Return online and negotiate to 9600bps. |
|---------------+--------------------------------------------|
| O12000 | Return online and negotiate to 12Kbps. |
|---------------+--------------------------------------------|
| O14400 | Return online and negotiate to 14.4Kbps. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SPID 1 SET |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT !C6=<#> |
| | |
| | AT [cmds] !C6="<#>" [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the first SPID. The SPID must be |
| | surrounded by single or double quotes if |
| | there are more commands on the line. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SPID 2 SET |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT !C7=<#> |
| | |
| | AT [cmds] !C7="<#>" [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the second SPID. The SPID must be |
| | surrounded by single or double quotes if |
| | there are more commands on the line. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SWITCH TYPE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] !C0=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects what type of network switch the TA |
| | is connected to. |
|------------------------------------------------------------|
| Command | Function |
|------------------+-----------------------------------------|
| !C0=0 | TA is connected to 5ESS switch. |
|------------------+-----------------------------------------|
| !C0=1 | TA is connected to DMS-100 switch. |
|------------------+-----------------------------------------|
| í !C0=2 | TA is connected to NI-1 switch. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SWITCH VERSION |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] !C1=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects what version of network switch the |
| | TA is connected to. |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| !C1=0 | TA is connected to point-to-point 5ESS |
| | switch. |
|---------------+--------------------------------------------|
| !C1=1 | TA is connected to multipoint 5ESS switch. |
|---------------+--------------------------------------------|
| !C1=2 | TA is connected to IC-0 DMS-100 switch. |
|---------------+--------------------------------------------|
| !C1=3 | TA is connected to IC-1 DMS-100 switch. |
|---------------+--------------------------------------------|
| í !C1=4 | TA is connected to NI-1 switch. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SYNC/ASYNC MODE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &Mn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects whether the DTE will be operation |
| | in synchronous or asynchronous mode. |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| í &M0 | DTE in asynchronous mode. |
|---------------+--------------------------------------------|
| &M1 | DTE in asynchronous mode for dialing, |
| | synchronous mode for communications. |
|---------------+--------------------------------------------|
| &M2 | DTE in synchronous mode, TA dials stored |
| | number on high DTR. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| TEI 1 SET |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] !D3=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the first Terminal Endpoint |
| | Identifier. |
|------------------------------------------------------------|
| Command | Function |
|------------------+-----------------------------------------|
| !D3=0 | Sets the TEI to the value indicated. |
| | |
| ... | |
| | |
| !D3=63 | |
|------------------+-----------------------------------------|
| !D3=127 | Disables channel 1. |
|------------------+-----------------------------------------|
| í !D3=255 | Allows dynamic TEI assignment. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| TEI 2 SET |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] !D4=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the second Terminal Endpoint |
| | Identifier. |
|------------------------------------------------------------|
| Command | Function |
|------------------+-----------------------------------------|
| !D4=0 | Sets the TEI to the value indicated. |
| | |
| ... | |
| | |
| !D4=63 | |
|------------------+-----------------------------------------|
| í !D4=127 | Disables channel 2. |
|------------------+-----------------------------------------|
| !D4=255 | Allows dynamic TEI assignment. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| TEI X.25 SET |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] !D0=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the Terminal Endpoint Identifier for |
| | X.25. |
|------------------------------------------------------------|
| Command | Function |
|-----------------+------------------------------------------|
| !D0=0 | Sets the TEI to the value indicated. |
| | |
| ... | |
| | |
| !D0=63 | |
|-----------------+------------------------------------------|
| í !D0=127 | Disables X.25 operation. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| TRANSMISSION SPEED |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %A4=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the transmission speed of the TA. |
|------------------------------------------------------------|
| Command | Function |
|-------------------+----------------------------------------|
| %A4=0 | Transmission speed is 64Kbps. |
|-------------------+----------------------------------------|
| %A4=1 | Transmission speed is 56Kbps. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| TRELLIS CODING |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] Bn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects whether trellis coding will be used |
| | at 9600bps. |
|------------------------------------------------------------|
| Command | Function |
|------------------------+-----------------------------------|
| í B2 | Trellis coding enabled. |
|------------------------+-----------------------------------|
| B3 | Trellis coding disabled. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| V.120 RECEIVE FRAME SIZE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %E1=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 256 |
|--------------+---------------------------------------------|
| Range: | 1 - 260 |
|--------------+---------------------------------------------|
| Unit: | 1 byte |
|--------------+---------------------------------------------|
| Description: | Sets the maximum size of a received V.120 |
| | frame. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| V.120 TRANSMIT FRAME SIZE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %E0=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 256 |
|--------------+---------------------------------------------|
| Range: | 1 - 260 |
|--------------+---------------------------------------------|
| Unit: | 1 byte |
|--------------+---------------------------------------------|
| Description: | Sets the maximum size of a transmitted |
| | V.120 frame. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| V.120 TRANSMIT TIMER |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %E3=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 10 |
|--------------+---------------------------------------------|
| Range: | 1 - 255 |
|--------------+---------------------------------------------|
| Unit: | Unidentified |
|--------------+---------------------------------------------|
| Description: | Sets the V.120 T200 transmission timer. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| V.120 WINDOW SIZE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %E2=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 8 |
|--------------+---------------------------------------------|
| Range: | 1 - 127 |
|--------------+---------------------------------------------|
| Unit: | N/A |
|--------------+---------------------------------------------|
| Description: | Sets the size of the V.120 window. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| V.42 FAST DETECT |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Mn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the normal or fast negotiation |
| | sequence for V.42. |
|------------------------------------------------------------|
| Command | Function |
|--------------------+---------------------------------------|
| \M0 | V.42 fast detect disabled. |
|--------------------+---------------------------------------|
| í \M1 | V.42 fast detect enabled. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| WRITE PROTECT |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] @G=x [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the ability to prevent permanent |
| | changes to the TA’s configuration from |
| | being made. All changes made in temporary |
| | memory will be reset at the end of every |
| | call. |
|------------------------------------------------------------|
| Command | Function |
|-----------------------+------------------------------------|
| í @G=D | Write protect disabled. |
|-----------------------+------------------------------------|
| @G=E | Write protect enabled. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| WRITE TO STORED PROFILE |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &Wn [cmds] |
|--------------+---------------------------------------------|
| Description: | Saves the configuration of the TA except |
| | for ISDN settings to stored profile n. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| WRITE TO STORED PROFILE - FULL |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] >Wn [cmds] |
|--------------+---------------------------------------------|
| Description: | Saves the complete configuration of the TA |
| | to stored profile n. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 AUTO-ANSWER |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B97=x [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets whether the TA will auto-answer an |
| | incoming X.25 virtual call. |
|------------------------------------------------------------|
| Command | Function |
|------------------------+-----------------------------------|
| %B97=D | Auto-answer disabled. |
|------------------------+-----------------------------------|
| í %B97=E | Auto-answer enabled. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 CALL CHARGING |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B10=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the type of call charging for X.25. |
|------------------------------------------------------------|
| Command | Function |
|-----------------+------------------------------------------|
| í %B10=0 | X.25 will use normal call charging. |
|-----------------+------------------------------------------|
| %B10=1 | X.25 will use reverse call charging. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 CLOSED USER GROUP |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B8=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the type of Closed User Group used |
| | for X.25. |
|------------------------------------------------------------|
| Command | Function |
|------------------+-----------------------------------------|
| í %B8=0 | CUG not used. |
|------------------+-----------------------------------------|
| %B8=1 | Basic CUG used. |
|------------------+-----------------------------------------|
| %B8=2 | CUG with outgoing access only used. |
|------------------+-----------------------------------------|
| %B8=3 | CUG will full access used. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 CLOSED USER GROUP ID |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B9=nnnn [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the ID for the X.25 CUG. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 CODE - INCOMING |
|------------------------------------------------------------|
| Type: | Read-only |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B16? [cmds] |
|--------------+---------------------------------------------|
| Description: | Stores the result code for incoming X.25 |
| | virtual calls. |
|------------------------------------------------------------|
| Value | Meaning |
|----------------------+-------------------------------------|
| 0 | Call was not redirected. |
|----------------------+-------------------------------------|
| 1 | Station was busy. |
|----------------------+-------------------------------------|
| 9 | Station was out of order. |
|----------------------+-------------------------------------|
| 15 | Call was redirected. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 CODE - OUTGOING |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B15? [cmds] |
|--------------+---------------------------------------------|
| Description: | Stores the result code for outgoing X.25 |
| | virtual calls. |
|------------------------------------------------------------|
| Value | Meaning |
|--------------------+---------------------------------------|
| 0 | Call was not redirected. |
|--------------------+---------------------------------------|
| 1 | Station was busy. |
|--------------------+---------------------------------------|
| 7 | Call was within a hunt group. |
|--------------------+---------------------------------------|
| 9 | Station was out of order. |
|--------------------+---------------------------------------|
| 15 | Call was redirected. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 D-CHANNEL |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] !C3=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects whether X.25 will be used on the |
| | D-channel. |
|------------------------------------------------------------|
| Command | Function |
|---------------------+--------------------------------------|
| í !C3=0 | X.25 disabled on D-channel. |
|---------------------+--------------------------------------|
| !C3=1 | X.25 enabled on D-channel. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 D-CHANNEL - CHANNELS, BIDIRECTIONAL |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] !X6=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 8 |
|--------------+---------------------------------------------|
| Range: | 0 - 255 |
|--------------+---------------------------------------------|
| Unit: | N/A |
|--------------+---------------------------------------------|
| Description: | Sets the number of bidirectional logical |
| | channels for X.25. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 D-CHANNEL - CHANNELS, INCOMING |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] !X5=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 0 |
|--------------+---------------------------------------------|
| Range: | 0 - 255 |
|--------------+---------------------------------------------|
| Unit: | N/A |
|--------------+---------------------------------------------|
| Description: | Sets the number of incoming logical |
| | channels for X.25. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 D-CHANNEL - CHANNELS, OUTGOING |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] !X7=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 0 |
|--------------+---------------------------------------------|
| Range: | 0 - 255 |
|--------------+---------------------------------------------|
| Unit: | N/A |
|--------------+---------------------------------------------|
| Description: | Sets the number of outgoiing logical |
| | channels for X.25. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 D-CHANNEL - CHANNELS, VIRTUAL |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] !X4=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 0 |
|--------------+---------------------------------------------|
| Range: | 0 - 255 |
|--------------+---------------------------------------------|
| Unit: | N/A |
|--------------+---------------------------------------------|
| Description: | Sets the number of permanent virtual |
| | channels for X.25. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 D-CHANNEL - MODULUS |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] !X8=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 8 |
|--------------+---------------------------------------------|
| Range: | 8, 128 |
|--------------+---------------------------------------------|
| Unit: | N/A |
|--------------+---------------------------------------------|
| Description: | Sets the sequence modulus for X.25. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 D-CHANNEL - NEGOTIATION |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] !D1=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects X.25 parameter negotiation. |
|------------------------------------------------------------|
| Command | Function |
|--------------------+---------------------------------------|
| !D1=0 | X.25 negotiation disabled. |
|--------------------+---------------------------------------|
| í !D1=1 | X.25 negotiation enabled. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 D-CHANNEL - RECEIVE PACKET SIZE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] !X2=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the size of the received packets for |
| | X.25. |
|------------------------------------------------------------|
| Command | Function |
|--------------------+---------------------------------------|
| í !X2=7 | Packet size set to 128 bytes. |
|--------------------+---------------------------------------|
| !X2=8 | Packet size set to 256 bytes. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 D-CHANNEL - RECEIVE WINDOW SIZE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] !X0=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 2 |
|--------------+---------------------------------------------|
| Range: | 1 - 7 |
|--------------+---------------------------------------------|
| Unit: | N/A |
|--------------+---------------------------------------------|
| Description: | Sets the size of the X.25 receive window. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 D-CHANNEL - TRANSMIT PACKET SIZE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] !X3=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the size of the transmitted packets |
| | for X.25. |
|------------------------------------------------------------|
| Command | Function |
|--------------------+---------------------------------------|
| í !X3=7 | Packet size set to 128 bytes. |
|--------------------+---------------------------------------|
| !X3=8 | Packet size set to 256 bytes. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 D-CHANNEL - TRANSMIT WINDOW SIZE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] !X1=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 2 |
|--------------+---------------------------------------------|
| Range: | 1 - 7 |
|--------------+---------------------------------------------|
| Unit: | N/A |
|--------------+---------------------------------------------|
| Description: | Sets the size of the X.25 transmit window. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 LOGICAL CHANNEL |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B6=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 1 |
|--------------+---------------------------------------------|
| Range: | 0 - 255 |
|--------------+---------------------------------------------|
| Unit: | N/A |
|--------------+---------------------------------------------|
| Description: | Selects the logical channel for X.25 |
| | operation. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 OUTGOING CALL ADDRESS |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B17=nnnn [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the address for an outgoing X.25 |
| | virtual call. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PACKET CALL TIMER |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B98=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 200 |
|--------------+---------------------------------------------|
| Range: | 0 - 600 |
|--------------+---------------------------------------------|
| Unit: | Unidentified |
|--------------+---------------------------------------------|
| Description: | Sets the packet call timer for X.25 |
| | operation. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD ANCILLARY DEVICE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %L5=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects control of an ancillary device by |
| | the PAD. |
|------------------------------------------------------------|
| Command | Function |
|----------------+-------------------------------------------|
| %L5=0 | Device disabled. |
|----------------+-------------------------------------------|
| í %L5=1 | Device enabled for data transfer only. |
|----------------+-------------------------------------------|
| %L5=2 | Device enabled for data transfer and |
| | command control. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD BREAK RESPONSE |
|------------------------------------------------------------|
| Type: | Configuration |
|----------------+-------------------------------------------|
| Format: | AT [cmds] %L7=n [cmds] |
|----------------+-------------------------------------------|
| Default: | 0 |
|----------------+-------------------------------------------|
| Range: | 0 - 31 |
|----------------+-------------------------------------------|
| Description: | Sets action the PAD takes in response to |
| | receiving a BREAK from the DTE. |
|------------------------------------------------------------|
| Bit | Value | Function |
|----------+--------+----------------------------------------|
| 0 | í 0 | PAD will not send an interrupt packet. |
| | | |
| | 1 | PAD will send an interrupt packet. |
|----------+--------+----------------------------------------|
| 1 | í 0 | PAD will not send a reset packet. |
| | | |
| | 1 | PAD will send a reset packet. |
|----------+--------+----------------------------------------|
| 2 | í 0 | PAD will not send an indication of the |
| | | break. |
| | 1 | |
| | | PAD will send an indication of the |
| | | break. |
|----------+--------+----------------------------------------|
| 3 | í 0 | PAD will not escape from the data |
| | | state. |
| | 1 | |
| | | PAD will escape from the data state. |
|----------+--------+----------------------------------------|
| 4 | í 0 | PAD will not set %L8 to 1. |
| | | |
| | 1 | PAD will set %L8 to 1. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD CARRIAGE RETURN TRANSLATION |
|------------------------------------------------------------|
| Type: | Configuration |
|----------------+-------------------------------------------|
| Format: | AT [cmds] %L13=n [cmds] |
|----------------+-------------------------------------------|
| Default: | 5 |
|----------------+-------------------------------------------|
| Range: | 0 - 7 |
|----------------+-------------------------------------------|
| Description: | Selects when the PAD will add line feeds |
| | to carriage returns. |
|------------------------------------------------------------|
| Bit | Value | Function |
|----------+--------+----------------------------------------|
| 0 | 0 | PAD will not add a line feed after a |
| | | carriage return being sent to the DTE. |
| | í 1 | |
| | | PAD will add a line feed after a |
| | | carriage return being sent to the DTE. |
|----------+--------+----------------------------------------|
| 1 | í 0 | PAD will not add a line feed after a |
| | | carriage return being received from |
| | 1 | the DTE. |
| | | |
| | | PAD will add a line feed after a |
| | | carriage return being received from |
| | | the DTE. |
|----------+--------+----------------------------------------|
| 2 | 0 | PAD will not add a line feed after a |
| | | carriage return being echoed. |
| | í 1 | |
| | | PAD will add a line feed after a |
| | | carriage return being echoed. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD - CARRIAGE RETURN PADDING |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %L9=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 0 |
|--------------+---------------------------------------------|
| Range: | 0 - 255 |
|--------------+---------------------------------------------|
| Unit: | Unidentified |
|--------------+---------------------------------------------|
| Description: | Sets the amount of padding after a carriage |
| | return. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD DATA EDITING |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %L15=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects whether editing the data being |
| | transferred is allowed. |
|------------------------------------------------------------|
| Command | Function |
|-------------------------+----------------------------------|
| %L12=0 | Editing disabled. |
|-------------------------+----------------------------------|
| í %L12=1 | Editing enabled. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD DELETE CHARACTER |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %L16=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 8 |
|--------------+---------------------------------------------|
| Range: | 0 - 127 |
|--------------+---------------------------------------------|
| Unit: | 1 ASCII character |
|--------------+---------------------------------------------|
| Description: | Sets the character used for character |
| | deletion. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD - DISCARD DATA |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %L8=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects whether the PAD will deliver data |
| | to the DTE. |
|------------------------------------------------------------|
| Command | Function |
|-----------------------+------------------------------------|
| í %L8=0 | Deliver data to the DTE. |
|-----------------------+------------------------------------|
| %L8=1 | Discard data. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD ECHO |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %L2=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects whether PAD functions will echo |
| | incoming characters. |
|------------------------------------------------------------|
| Command | Function |
|-------------------------+----------------------------------|
| %L2=0 | PAD echo disabled. |
|-------------------------+----------------------------------|
| í %L2=1 | PAD echo enabled. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD ECHO MASK |
|------------------------------------------------------------|
| Type: | Configuration |
|----------------+-------------------------------------------|
| Format: | AT [cmds] %L20=n [cmds] |
|----------------+-------------------------------------------|
| Default: | 248 |
|----------------+-------------------------------------------|
| Range: | 0 - 255 |
|----------------+-------------------------------------------|
| Description: | Selects which control characters will be |
| | echoed. |
|------------------------------------------------------------|
| Bit | Value | Function |
|----------+--------+----------------------------------------|
| 0 | í 0 | Carriage return will be echoed. |
| | | |
| | 1 | Carriage return will not be echoed. |
|----------+--------+----------------------------------------|
| 1 | í 0 | Line feed will be echoed. |
| | | |
| | 1 | Line feed will not be echoed. |
|----------+--------+----------------------------------------|
| 2 | í 0 | The control characters VT, HT, and |
| | | form feeds will be echoed. |
| | 1 | |
| | | The control characters VT, HT, and |
| | | form feeds will not be echoed. |
|----------+--------+----------------------------------------|
| 3 | 0 | Bells and backspaces will be echoed. |
| | | |
| | í 1 | Bells and backspaces will not be |
| | | echoed. |
|----------+--------+----------------------------------------|
| 4 | 0 | The control character ENQ and escapes |
| | | will be echoed. |
| | í 1 | |
| | | The control character ENQ and escapes |
| | | will not be echoed. |
|----------+--------+----------------------------------------|
| 5 | 0 | The control characters ACK, NAK, STX, |
| | | SOH, EOT, ETB, and ETX will be echoed. |
| | í 1 | |
| | | The control characters ACK, NAK, STX, |
| | | SOH, EOT, ETB, and ETX will not be |
| | | echoed. |
|----------+--------+----------------------------------------|
| 6 | 0 | Parameters 16, 17, and 18 will be |
| | | echoed. |
| | í 1 | |
| | | Parameters 16, 17, and 18 will not be |
| | | echoed. |
|----------+--------+----------------------------------------|
| 7 | 0 | All other control characters will be |
| | | echoed. |
| | í 1 | |
| | | All other control characters will not |
| | | be echoed. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD FLOW CONTROL |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %L12=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects flow control for the X.25 PAD. |
|------------------------------------------------------------|
| Command | Function |
|-----------------------+------------------------------------|
| %L12=0 | Flow control disabled. |
|-----------------------+------------------------------------|
| í %L12=1 | Flow control enabled. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD - FORM FEED PADDING |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %L22=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 0 |
|--------------+---------------------------------------------|
| Range: | 0 - 255 |
|--------------+---------------------------------------------|
| Unit: | Unidentified |
|--------------+---------------------------------------------|
| Description: | Sets the amount of padding after a form |
| | feed. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD FORWARDING |
|------------------------------------------------------------|
| Type: | Configuration |
|----------------+-------------------------------------------|
| Format: | AT [cmds] %L3=n [cmds] |
|----------------+-------------------------------------------|
| Default: | 2 |
|----------------+-------------------------------------------|
| Range: | 0 - 127 |
|----------------+-------------------------------------------|
| Description: | Selects which characters will be |
| | forwarded through the PAD. |
|------------------------------------------------------------|
| Bit | Value | Function |
|----------+-------+-----------------------------------------|
| 0 | í 0 | Alphanumeric characters will not be |
| | | forwarded. |
| | 1 | |
| | | Alphanumeric characters (A-Z, a-z, 0-9) |
| | | will be forwarded. |
|----------+-------+-----------------------------------------|
| 1 | 0 | Carriage returns will not be forwarded. |
| | | |
| | í 1 | Carriage returns will be forwarded. |
|----------+-------+-----------------------------------------|
| 2 | í 0 | The control characters ENQ, ACK, bells, |
| | | and escapes will not be forwarded. |
| | 1 | |
| | | The control characters ENQ, ACK, bells, |
| | | and escapes will be forwarded. |
|----------+-------+-----------------------------------------|
| 3 | í 0 | The control characters CAN, DC2, and |
| | | delete will not be forwarded. |
| | 1 | |
| | | The control characters CAN, DC2, and |
| | | delete will be forwarded. |
|----------+-------+-----------------------------------------|
| 4 | í 0 | The control characters ETX and EOT will |
| | | not be forwarded. |
| | 1 | |
| | | The control characters ETX and EOT will |
| | | be forwarded. |
|----------+-------+-----------------------------------------|
| 5 | í 0 | The control characters HT, LT, VT, and |
| | | form feeds will not be forwarded. |
| | 1 | |
| | | The control characters HT, LT, VT, and |
| | | FF will be forwarded. |
|----------+-------+-----------------------------------------|
| 6 | í 0 | All other control characters will not |
| | | be forwarded. |
| | 1 | |
| | | All other control characters will be |
| | | forwarded. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD IDLE TIME |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %L4=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 0 |
|--------------+---------------------------------------------|
| Range: | 0 - 255 |
|--------------+---------------------------------------------|
| Unit: | Unidentified |
|--------------+---------------------------------------------|
| Description: | Sets the PAD’s idle time delay. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD LINE DELETE CHARACTER |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %L17=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 24 |
|--------------+---------------------------------------------|
| Range: | 0 - 127 |
|--------------+---------------------------------------------|
| Unit: | 1 ASCII character |
|--------------+---------------------------------------------|
| Description: | Sets the character used for line deletion. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD LINE DISPLAY CHARACTER |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %L18=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 18 |
|--------------+---------------------------------------------|
| Range: | 0 - 127 |
|--------------+---------------------------------------------|
| Unit: | 1 ASCII character |
|--------------+---------------------------------------------|
| Description: | Sets the character used for line display. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD - LINE FEED PADDING |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %L14=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 0 |
|--------------+---------------------------------------------|
| Range: | 0 - 255 |
|--------------+---------------------------------------------|
| Unit: | Unidentified |
|--------------+---------------------------------------------|
| Description: | Sets the amount of padding after a line |
| | feed. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD - LINE WRAP |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %L10=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 0 |
|--------------+---------------------------------------------|
| Range: | 0 - 255 |
|--------------+---------------------------------------------|
| Unit: | 1 character |
|--------------+---------------------------------------------|
| Description: | Sets the length of a line for the X.25 PAD. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD - LOCAL SERIAL PORT SPEED |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %L11=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the speed of operation for the serial |
| | port when using the X.25 PAD. |
|------------------------------------------------------------|
| Command | Function |
|------------------+-----------------------------------------|
| %L11=2 | Set serial port speed to 300bps. |
|------------------+-----------------------------------------|
| %L11=3 | Set serial port speed to 1200bps. |
|------------------+-----------------------------------------|
| %L11=4 | Set serial port speed to 600bps. |
|------------------+-----------------------------------------|
| %L11=12 | Set serial port speed to 2400bps. |
|------------------+-----------------------------------------|
| %L11=13 | Set serial port speed to 4800bps. |
|------------------+-----------------------------------------|
| %L11=14 | Set serial port speed to 9600bps. |
|------------------+-----------------------------------------|
| %L11=15 | Set serial port speed to 19.2Kbps. |
|------------------+-----------------------------------------|
| í %L11=16 | Set serial port speed to 38.4Kbps. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD PARITY |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %L21=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the format of the parity bit. |
|------------------------------------------------------------|
| Command | Function |
|------------------------+-----------------------------------|
| %L21=0 | No parity. |
|------------------------+-----------------------------------|
| %L21=3 | Use setting in @P3. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD RECALL |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %L1=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 0 |
|--------------+---------------------------------------------|
| Range: | 0, 1, 32 - 126 |
|--------------+---------------------------------------------|
| Unit: | 1 ASCII character (see below for |
| | exceptions) |
|--------------+---------------------------------------------|
| Description: | Sets the character for PAD recall. 0 |
| | disables recall, and 1 sets it to the DLE |
| | control character. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD SERVICE SIGNALS |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %L6=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects which PAD service signals will be |
| | sent to the user. |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| %L6=0 | No signals will be sent. |
|---------------+--------------------------------------------|
| %L6=1 | All signals except prompt will be sent. |
|---------------+--------------------------------------------|
| %L6=4 | Only prompt will be sent. |
|---------------+--------------------------------------------|
| %L6=5 | All signals will be sent. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PAD SERVICE SIGNAL DESTINATION |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %L19=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects where PAD service signals will be |
| | sent. |
|------------------------------------------------------------|
| Command | Function |
|-----------------+------------------------------------------|
| %L19=0 | Signals will not be sent. |
|-----------------+------------------------------------------|
| %L19=1 | Signals will be sent to the printer. |
|-----------------+------------------------------------------|
| í %L19=2 | Signals will be sent to the monitor. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 PVC |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B5=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects whether X.25 will use Permanent |
| | Virtual Channel. |
|------------------------------------------------------------|
| Command | Function |
|-------------------------+----------------------------------|
| í %B5=0 | X.25 PVC disabled. |
|-------------------------+----------------------------------|
| %B5=1 | X.25 PVC enabled. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 RECEIVE PACKET SIZE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B2=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 0 |
|--------------+---------------------------------------------|
| Range: | 0, 7 - 10 |
|--------------+---------------------------------------------|
| Unit: | N/A |
|--------------+---------------------------------------------|
| Description: | Sets the size of the received packets for |
| | X.25. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 RECEIVE THROUGHPUT |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B11=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the throughput for receiving X.25. |
|------------------------------------------------------------|
| Command | Function |
|---------------------+--------------------------------------|
| í %B11=0 | Use network speed. |
|---------------------+--------------------------------------|
| %B11=3 | Throughput set to 75bps. |
|---------------------+--------------------------------------|
| %B11=4 | Throughput set to 110bps. |
|---------------------+--------------------------------------|
| %B11=5 | Throughput set to 300bps. |
|---------------------+--------------------------------------|
| %B11=6 | Throughput set to 600bps. |
|---------------------+--------------------------------------|
| %B11=7 | Throughput set to 1200bps. |
|---------------------+--------------------------------------|
| %B11=8 | Throughput set to 2400bps. |
|---------------------+--------------------------------------|
| %B11=9 | Throughput set to 4800bps. |
|---------------------+--------------------------------------|
| %B11=10 | Throughput set to 9600bps. |
|---------------------+--------------------------------------|
| %B11=11 | Throughput set to 19.2Kbps. |
|---------------------+--------------------------------------|
| %B11=12 | Throughput set to 48Kbps. |
|---------------------+--------------------------------------|
| %B11=13 | Throughput set to 64Kbps. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 RECEIVE WINDOW SIZE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B0=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 0 |
|--------------+---------------------------------------------|
| Range: | 0 - 8 |
|--------------+---------------------------------------------|
| Unit: | N/A |
|--------------+---------------------------------------------|
| Description: | Sets the size of the X.25 receive window. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 RESET CODE |
|------------------------------------------------------------|
| Type: | Read-only |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B20? [cmds] |
|--------------+---------------------------------------------|
| Description: | Reports the reason for an X.25 reset. |
|------------------------------------------------------------|
| Value | Meaning |
|---------------+--------------------------------------------|
| 0 | Normal operation - no reset has occurred. |
|---------------+--------------------------------------------|
| 1 | DTE caused reset. |
|---------------+--------------------------------------------|
| 2 | Local procedure error occurred. |
|---------------+--------------------------------------------|
| 3 | Destination address is incompatible. |
|---------------+--------------------------------------------|
| 4 | Network is busy. |
|---------------+--------------------------------------------|
| 5 | Remote procedure error occurred. |
|---------------+--------------------------------------------|
| 6 | Cause of reset unknown. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 RESET TIMER |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B99=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 180 |
|--------------+---------------------------------------------|
| Range: | 0 - 600 |
|--------------+---------------------------------------------|
| Unit: | Unidentified |
|--------------+---------------------------------------------|
| Description: | Sets the reset timer for X.25 operation. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 RPOA |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B14=xxxx [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the RPOA for X.25. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 TRANSMIT DELAY TIME |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B19=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 0 |
|--------------+---------------------------------------------|
| Range: | 0 - 65535 |
|--------------+---------------------------------------------|
| Unit: | 1ms |
|--------------+---------------------------------------------|
| Description: | Sets the delay time for X.25 transmission. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 TRANSMIT PACKET SIZE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B3=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 0 |
|--------------+---------------------------------------------|
| Range: | 0, 7 - 10 |
|--------------+---------------------------------------------|
| Unit: | N/A |
|--------------+---------------------------------------------|
| Description: | Sets the size of the transmitted packets |
| | for X.25. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 TRANSMIT THROUGHPUT |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B12=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the throughput for transmitting X.25. |
|------------------------------------------------------------|
| Command | Function |
|-----------------------+------------------------------------|
| í %B12=0 | Use network speed. |
|-----------------------+------------------------------------|
| %B12=3 | Throughput set to 75bps. |
|-----------------------+------------------------------------|
| %B12=4 | Throughput set to 110bps. |
|-----------------------+------------------------------------|
| %B12=5 | Throughput set to 300bps. |
|-----------------------+------------------------------------|
| %B12=6 | Throughput set to 600bps. |
|-----------------------+------------------------------------|
| %B12=7 | Throughput set to 1200bps. |
|-----------------------+------------------------------------|
| %B12=8 | Throughput set to 2400bps. |
|-----------------------+------------------------------------|
| %B12=9 | Throughput set to 4800bps. |
|-----------------------+------------------------------------|
| %B12=10 | Throughput set to 9600bps. |
|-----------------------+------------------------------------|
| %B12=11 | Throughput set to 19.2Kbps. |
|-----------------------+------------------------------------|
| %B12=12 | Throughput set to 48Kbps. |
|-----------------------+------------------------------------|
| %B12=13 | Throughput set to 64Kbps. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 TRANSMIT WINDOW SIZE |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B1=n [cmds] |
|--------------+---------------------------------------------|
| Default: | 0 |
|--------------+---------------------------------------------|
| Range: | 0 - 8 |
|--------------+---------------------------------------------|
| Unit: | N/A |
|--------------+---------------------------------------------|
| Description: | Sets the size of the X.25 transmit window. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 USER DATA |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B18=xxxx [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets miscellaneous user data for X.25. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| X.25 USER ID |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] %B13=xxxx [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the network user ID for X.25. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| XON/XOFF PASS THROUGH |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] \Xn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects whether XON and XOFF characters |
| | will be sent to the remote modem. |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| í \X0 | XON/XOFF characters trapped. |
|---------------+--------------------------------------------|
| \X1 | XON/XOFF characters sent to remote modem. |