TEXT View Source
# NEWCOM, INC.
336IFXSP(C)
Card Type Modem (asynchronous)
Chipset Unidentified
I/O Options Audio line out, microphone in, speaker
out, voice, speakerphone
Maximum Data Rate 33.6Kbps
Maximum Fax Rate 14.4Kbps
Data Modulation Bell 103A, 212A
ITU-T V.21, V.22, V.22bis, V.23, V.32,
V.32bis, V.34
Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29
Error MNP5, V.42, V.42bis
Correction/Compression
Fax Class Class I
Data Bus 16-bit ISA
Card Size Full height, half length
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|----------------------+-------+---------------------+-------|
| Telephone line out | CN1 | Headphone line out | CN4 |
|----------------------+-------+---------------------+-------|
| Telephone line in | CN2 | Speaker out | CN5 |
|----------------------+-------+---------------------+-------|
| Microphone in | CN3 | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| PLUG-N-PLAY |
|------------------------------------------------------------|
| Setting | JP1/A | JP1/B | JP1/C |
|--------------------+-------------+------------+------------|
| í Enabled | Closed | Closed | Closed |
|--------------------+-------------+------------+------------|
| Disabled | Open | Open | Open |
|------------------------------------------------------------|
| Note: If Plug-N-Play mode is enabled, all other |
| jumper settings must also be set for Plug-N-Play. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| INTERRUPT SELECTION |
|------------------------------------------------------------|
| Setting |JP1/D |JP1/E |JP1/F |JP1/G |JP1/H |JP1/I |JP1/J |
|-----------+------+------+------+------+------+------+------|
| 3 | Open | Open | Open | Open | Open | Open |Closed|
|-----------+------+------+------+------+------+------+------|
| 4 | Open | Open | Open | Open | Open |Closed| Open |
|-----------+------+------+------+------+------+------+------|
| 5 | Open | Open | Open | Open |Closed| Open | Open |
|-----------+------+------+------+------+------+------+------|
| 7 | Open | Open | Open |Closed| Open | Open | Open |
|-----------+------+------+------+------+------+------+------|
| 10 |Closed| Open | Open | Open | Open | Open | Open |
|-----------+------+------+------+------+------+------+------|
| 11 | Open |Closed| Open | Open | Open | Open | Open |
|-----------+------+------+------+------+------+------+------|
| 12 | Open | Open |Closed| Open | Open | Open | Open |
|-----------+------+------+------+------+------+------+------|
| í |Closed|Closed|Closed|Closed|Closed|Closed|Closed|
|Plug-N-Play| | | | | | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT ADDRESS SELECTION |
|------------------------------------------------------------|
| Setting | JP1/K | JP1/L | JP1/M | JP1/N |
|---------------+-----------+----------+----------+----------|
| 3F8h (COM1:) | Closed | Closed | Open | Open |
|---------------+-----------+----------+----------+----------|
| 2F8h (COM2:) | Closed | Open | Open | Closed |
|---------------+-----------+----------+----------+----------|
| 3E8h (COM3:) | Open | Closed | Closed | Open |
|---------------+-----------+----------+----------+----------|
| 2E8h (COM4:) | Open | Open | Closed | Closed |
|---------------+-----------+----------+----------+----------|
| í Plug-N-Play | Open | Open | Open | Open |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SUPPORTED STANDARD COMMANDS |
|------------------------------------------------------------|
| Basic AT Commands |
|------------------------------------------------------------|
| +++, ‘comma’, A/ |
|------------------------------------------------------------|
| A, C, D, E, F, H, L, M, N, O, P, Q, T, V, X, Y, Z |
|------------------------------------------------------------|
| &C, &D, &F, &G, &J, &K, &P, &S, &T, &W, &Y, &Z |
|------------------------------------------------------------|
| Extended AT Commands |
|------------------------------------------------------------|
| \A, \B, \C, \G, \J, \N, \O, \Q, \T, \U, \X, \Y, \Z |
|------------------------------------------------------------|
| %A, %C, %E, %G |
|------------------------------------------------------------|
| Special AT Commands |
|------------------------------------------------------------|
| -C, "H, -J, "O |
|------------------------------------------------------------|
| S-Registers |
|------------------------------------------------------------|
| S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, |
| S14, S16, S18, S21, S22, S23, S25, S27 |
|------------------------------------------------------------|
| S30, S31, S33, S37 |
|------------------------------------------------------------|
| Note: See MHI help file for complete information. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| IS-101 COMMANDS |
|------------------------------------------------------------|
| +V Commands |
|------------------------------------------------------------|
| +VBT, +VCID, +VCSD, +VDR, +VEM, +VGM, +VGR, +VGS, +VGT, |
| +VIP, +VIT, +VLS, +VNH, +VRA, +VRN |
|------------------------------------------------------------|
| +VRX, +VSD, +VSM, +VSP, +VTD, +VTS, +VTX, #VSPS |
|------------------------------------------------------------|
| -S Commands |
|------------------------------------------------------------|
| -SAC, -SCD, -SDA, -SDS, -SER, -SFX, -SIC, -SIP, -SQR, |
| -SSP, -SSQ, -SSR, -SSV |
|------------------------------------------------------------|
| Note: The functions of the IS-101 commands are |
| unidentified. |
+------------------------------------------------------------+
Proprietary AT Command Set
+----------------------------------------------------------------+
| BREAK TYPE |
|----------------------------------------------------------------|
|Type: |Configuration |
|------------------+---------------------------------------------|
|Format: |AT [cmds] \Kn [cmds] |
|------------------+---------------------------------------------|
|Description: |Configures action of break signal. |
|----------------------------------------------------------------|
| Command |Break from DTE | Break from | Modem | Break from |
| | | DTE |receives \B |remote modem|
| |Reliable/Normal| | | |
| | mode |Direct mode | | |
|---------+---------------+------------+------------+------------|
| \K0 |Enter command |Send break |Buffers |Buffers |
| |mode, do not |to remote |cleared and |cleared and |
| |send break to |modem |break sent |break sent |
| |remote modem. |immediately,|to remote |to DTE. |
| | |then enter |modem. | |
| | |command | | |
| | |mode. | | |
|---------+---------------+------------+------------+------------|
| \K1 |Buffers cleared|Send break |Buffers |Buffers |
| |and break sent |to remote |cleared and |cleared and |
| |to remote |modem |break sent |break sent |
| |modem. |immediately.|to remote |to DTE. |
| | | |modem. | |
|---------+---------------+------------+------------+------------|
| \K2 |Enter command |Send break |Send break |Send break |
| |mode, do not |to remote |to remote |to DTE |
| |send break to |modem |modem |immediately.|
| |remote modem. |immediately,|immediately.| |
| | |then enter | | |
| | |command | | |
| | |mode. | | |
|---------+---------------+------------+------------+------------|
| \K3 |Send break to |Send break |Send break |Send break |
| |remote modem |to remote |to remote |to DTE |
| |immediately. |modem |modem |immediately.|
| | |immediately.|immediately.| |
|---------+---------------+------------+------------+------------|
| \K4 |Enter command |Send break |Send break |Break sent |
| |mode, do not |to remote |to remote |with |
| |send break to |modem |modem with |received |
| |remote modem. |immediately,|transmitted |data to the |
| | |then enter |data. |DTE. |
| | |command | | |
| | |mode. | | |
|---------+---------------+------------+------------+------------|
| \K5 |Send break with|Send break |Send break |Break sent |
| |transmitted |to remote |to remote |with |
| |data. |modem |modem with |received |
| | |immediately.|transmitted |data to the |
| | | |data. |DTE. |
+----------------------------------------------------------------+
+------------------------------------------------------------+
| COMMUNICATION PROTOCOLS |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] Bn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the communication protocol for |
| | low-speed data calls. |
|--------------+---------------------------------------------|
| Command | Protocol |
|--------------+---------------------------------------------|
| B0 | Modem will use ITU-T V.22 at 1200bps. |
|--------------+---------------------------------------------|
| í B1 | Modem will use Bell 212A at 1200bps. |
|--------------+---------------------------------------------|
| B2 | Modem will use ITU-T V.23 at 1200/75bps. |
|--------------+---------------------------------------------|
| B3 | Modem will use ITU-T V.23 at 75/1200bps. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DISPLAY INFORMATION |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] In [cmds] |
|--------------+---------------------------------------------|
| Description: | Displays information requested about the |
| | modem. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| I0 | Displays product identification code. |
|--------------+---------------------------------------------|
| I1 | Displays chip firmware revision. |
|--------------+---------------------------------------------|
| I2 | Tests and displays ROM checksum result. |
|--------------+---------------------------------------------|
| I3 | Displays modem chipset name. |
|--------------+---------------------------------------------|
| I5 | Displays hardware configuration. |
|--------------+---------------------------------------------|
| I6 | Displays country code. |
|--------------+---------------------------------------------|
| I7 | Displays board firmware revision. |
|--------------+---------------------------------------------|
| I8 | Displays chipset feature bitmap. |
|--------------+---------------------------------------------|
| I10 | Displays board feature bitmap. |
|--------------+---------------------------------------------|
| I11 | Displays board feature bitmap. |
|--------------+---------------------------------------------|
| I14 | Displays digital SAFE device information. |
|--------------+---------------------------------------------|
| I20 | Displays the revision level of the modem's |
| | voice chipset. |
|--------------+---------------------------------------------|
| I21 | Displays the revision level of the modem's |
| | voice firmware. |
|--------------+---------------------------------------------|
| I22 | Displays the voice chipset manufacturer’s |
| | name. |
|--------------+---------------------------------------------|
| I23 | Displays the model name of the modem's |
| | voice chipset. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DISPLAY PROFILES |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &Vn [cmds] |
|--------------+---------------------------------------------|
| Description: | Displays active and stored configuration |
| | profiles. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| í &V0 | Displays stored profile 0. |
|--------------+---------------------------------------------|
| &V1 | Displays stored profile 1. |
|--------------+---------------------------------------------|
| &V3 | Displays relay status and I/O information. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| EXTENDED RESULT CODES |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] Wn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects which result codes the modem will |
| | report. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| í W0 | Enables CONNECT result codes to report DTE |
| | speed. |
|--------------+---------------------------------------------|
| W1 | Enables CONNECT result codes to report DTE |
| | speed. |
|--------------+---------------------------------------------|
| W2 | Enables CONNECT result codes to report DCE |
| | speed. |
|--------------+---------------------------------------------|
| W3 | Enables CONNECT result codes to report DTE |
| | speed with error correction and compression |
| | information. |
|--------------+---------------------------------------------|
| W4 | Enables CONNECT result codes to report DTE |
| | speed with modulation protocol, error |
| | correction, and compression information. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| MODE SELECTION |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] +FCLASS=n |
|--------------+---------------------------------------------|
| Description: | Sets what mode the modem will operate in. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| +FCLASS=0 | Data mode. |
|--------------+---------------------------------------------|
| +FCLASS=1 | Class 1 fax mode. |
|--------------+---------------------------------------------|
| +FCLASS=8 | Voice mode. |
|--------------+---------------------------------------------|
| +FCLASS=80 | IS-101 voice mode. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| TRELLIS CODING |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] &Un [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects whether the modem will use trellis |
| | coding. |
|------------------------------------------------------------|
| Command | Function |
|-----------------------+------------------------------------|
| í &U0 | Trellis coding enabled. |
|-----------------------+------------------------------------|
| &U1 | Trellis coding disabled. |
+------------------------------------------------------------+