TEXT View Source
# PATTON ELECTRONICS COMPANY
1035
Card Type Short Range Modem
Chip Set Unidentified
I/O Options 25-pin serial port (RS-232), power
network interface via RJ-45 (RJ-11 optional)
Wiring Type Unshielded twisted pair
Maximum Data Rate 64Kbps
Data Bus External
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|------------------------------------------------------------|
| DTE/DCE serial port | CN1 | Power connector | CN3 |
| (25-pin connector) | | | |
|------------------------+-------+-----------------+---------|
| Network interface via | CN2 | | |
| RJ-45 connector | | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Setting | Label | Position |
|-----------------------------------------+-------+----------|
| í Modem responds to local analog | SW1/1 | On |
| loopback requests from DTE pin 18 | | |
|-----------------------------------------+-------+----------|
| Modem ignores LAL requests from DTE pin | SW1/1 | Off |
| 18 | | |
|-----------------------------------------+-------+----------|
| í Modem responds to remote digital | SW1/2 | On |
| loopback requests from DTE pin 18 | | |
|-----------------------------------------+-------+----------|
| Modem ignores RDL requests from DTE pin | SW1/2 | Off |
| 18 | | |
|-----------------------------------------+-------+----------|
| í Factory configured - do not alter | SW1/3 | Off |
|-----------------------------------------+-------+----------|
| í Factory configured - do not alter | SW1/4 | Off |
|-----------------------------------------+-------+----------|
| í Factory configured - do not alter | SW1/5 | Off |
|-----------------------------------------+-------+----------|
| í Factory configured - do not alter | SW1/6 | Off |
|-----------------------------------------+-------+----------|
| í Factory configured - do not alter | SW1/7 | Off |
|-----------------------------------------+-------+----------|
| í V.54 test functions enabled | SW1/8 | Off |
|-----------------------------------------+-------+----------|
| V.54 test functions disabled | SW1/8 | On |
|-----------------------------------------+-------+----------|
| í Carrier forced high | SW2/6 | Off |
|-----------------------------------------+-------+----------|
| Carrier controlled by RTS | SW2/6 | On |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DATA RATE |
|------------------------------------------------------------|
| Setting | SW2/1 | SW2/2 | SW2/3 |
|------------------------------------------------------------|
| 32Kbps | Off | Off | On |
|------------------------------+-------------+------+--------|
| í 56Kbps | Off | On | Off |
|------------------------------+-------------+------+--------|
| 64Kbps | On | Off | Off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| TRANSMIT CLOCK SOURCE |
|------------------------------------------------------------|
| Source | SW2/4 | SW2/5 |
|--------------------------------------------+-------+-------|
| í Transmit clock generated internally | On | On |
|--------------------------------------------+-------+-------|
| Transmit clock derived from receive line | Off | On |
| signal | | |
|--------------------------------------------+-------+-------|
| Transmit clock derived from terminal | On | Off |
| interface | | |
+------------------------------------------------------------+
+------------------------------------------------------------+
| RTS/CTS DELAY |
|------------------------------------------------------------|
| Setting | SW2/7 | SW2/8 |
|---------------------------------+------------+-------------|
| í 7ms delay | On | On |
|---------------------------------+------------+-------------|
| 53ms delay | On | Off |
|---------------------------------+------------+-------------|
| No delay | Off | Off |
+------------------------------------------------------------+
+------------------------------------------------------------+
| LOOPBACK TEST SELECTOR |
|------------------------------------------------------------|
| Function | Label | Position |
|-----------------------------------------+-------+----------|
| Remote digital loopback initiated | SW3 | 1 |
|-----------------------------------------+-------+----------|
| Normal operation. Loopback not | SW3 | 2 |
| activated | | |
|-----------------------------------------+-------+----------|
| Activates local analog loopback | SW3 | 3 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| TEST PATTERN GENERATOR |
|------------------------------------------------------------|
| Function | Label | Position |
|-----------------------------------------+-------+----------|
| 511/E test pattern transmitted | SW4 | 1 |
| (intentional errors inserted) | | |
|-----------------------------------------+-------+----------|
| Normal operation. Test pattern not | SW4 | 2 |
| activated | | |
|-----------------------------------------+-------+----------|
| 511 test pattern transmitted | SW4 | 3 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED | Color | Status | Condition |
|------+-------+--------+------------------------------------|
| PWR | Green | On | Power is on |
|------+-------+--------+------------------------------------|
| PWR | Green | Off | Power is off |
|------+-------+--------+------------------------------------|
| TD | Red | On | Modem detecting zero on transmit |
| | | | data |
|------+-------+--------+------------------------------------|
| TD | Red | Off | Modem not detecting zero on |
| | | | transmit data |
|------+-------+--------+------------------------------------|
| CD | Red | On | Carrier signal high |
|------+-------+--------+------------------------------------|
| CD | Red | Off | Carrier signal low |
|------+-------+--------+------------------------------------|
| BERT | Red | On | Bit error likely in received |
| | | | signal or error detected in 511 or |
| | | | 511/E test pattern |
|------+-------+--------+------------------------------------|
| BERT | Red | Off | Error not detected |
|------+-------+--------+------------------------------------|
| LOOP | Red | On | Device has been placed in LAL or |
| | | | RDL test mode by local or remote |
| | | | user |
|------+-------+--------+------------------------------------|
| LOOP | Red | Off | Device is not conducting a test |
+------------------------------------------------------------+