TEXT View Source
# STOLLMANN GMBH
TA-D
Card Type ISDN TA
Chip Set Unidentified
Maximum Data Rate 64Kbps x 2
Data Bus External
ISDN Modulation Protocol V.110, 1TR6, DSS1, X.30
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|------------------------------------------------------------|
| Line out | CN1 | V.24 or | CN4 |
| | | X.21 port | |
| | | 1 | |
|--------------------------+-------------+------------+------|
| DC power | CN2 | Reset | SW1 |
| | | button | |
|--------------------------+-------------+------------+------|
| V.24 or X.21 port 2 | CN3 | | |
|------------------------------------------------------------|
| Note: X.21 functionality is provided by an included |
| adapter cable. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Setting | Label | Position |
|-------------------------------------+-------+--------------|
| í Editor debug mode disabled | J3 | Open |
|-------------------------------------+-------+--------------|
| Editor debug mode enabled | J3 | Closed |
|-------------------------------------+-------+--------------|
| í TA will use saved profile | J4 | Open |
|-------------------------------------+-------+--------------|
| TA will use default profile only | J4 | Closed |
|-------------------------------------+-------+--------------|
| í Remote configuration enabled | J6 | Open |
|-------------------------------------+-------+--------------|
| Remote configuration disabled | J6 | Closed |
|-------------------------------------+-------+--------------|
| í Port 1 is in V.24 mode | J9 | Open |
|-------------------------------------+-------+--------------|
| Port 1 is in X.21 mode | J9 | Closed |
|-------------------------------------+-------+--------------|
| í Port 2 is in V.24 mode | J10 | Open |
|-------------------------------------+-------+--------------|
| Port 2 is in X.21 mode | J10 | Closed |
|-------------------------------------+-------+--------------|
| í Port 1 is in DCE mode | J13 | Closed |
|-------------------------------------+-------+--------------|
| Port 1 is in DTE mode | J13 | Open |
|-------------------------------------+-------+--------------|
| í Pin 25 of port 1 is not connected | J13A | Open |
|-------------------------------------+-------+--------------|
| Pin 25 of port 1 is +9V DC | J13A | Closed |
|-------------------------------------+-------+--------------|
| í Port 2 is in DCE mode | J14 | Closed |
|-------------------------------------+-------+--------------|
| Port 2 is in DTE mode | J14 | Open |
|-------------------------------------+-------+--------------|
| í Pin 25 of port 2 is not connected | J14A | Open |
|-------------------------------------+-------+--------------|
| Pin 25 of port 2 is +9V DC | J14A | Closed |
|-------------------------------------+-------+--------------|
| í Pin 1 of port 1 is capacitive | JN1 | Open |
| ground | | |
|-------------------------------------+-------+--------------|
| Pin 1 of port 1 is galvanic ground | JN1 | Closed |
|-------------------------------------+-------+--------------|
| í Pin 1 of port 2 is capacitive | JN2 | Open |
| ground | | |
|-------------------------------------+-------+--------------|
| Pin 1 of port 2 is galvanic ground | JN2 | Closed |
|-------------------------------------+-------+--------------|
| í Factory configured - do not alter | J5 | Unidentified |
|-------------------------------------+-------+--------------|
| í Factory configured - do not alter | J7 | Unidentified |
|-------------------------------------+-------+--------------|
| í Factory configured - do not alter | J8 | Unidentified |
+------------------------------------------------------------+
+------------------------------------------------------------+
| ISDN INTERFACE TYPE |
|------------------------------------------------------------|
| Setting | J11 | J12 |
|------------------+--------------------+--------------------|
| S-interface | Pins 1 & 2 closed | Pins 1 & 2 closed |
|------------------+--------------------+--------------------|
| U-interface | Pins 2 & 3 closed | Pins 2 & 3 closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| LINE TYPE |
|------------------------------------------------------------|
| Setting | J1 | J2 |
|--------------------+-------------------+-------------------|
| Public ISDN | Open | Open |
|--------------------+-------------------+-------------------|
| ISDN PBX | Closed | Open |
|--------------------+-------------------+-------------------|
| ISDN PBX with LLC | Open | Closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DIAGNOSTIC LED(S) |
|------------------------------------------------------------|
| LED1 Status | Condition |
|-----------------------------------------+------------------|
| On | Power is on |
|-----------------------------------------+------------------|
| Off | Power is off |
|-----------------------------------------+------------------|
| Blinking | ISDN failed |
|-----------------------------------------+------------------|
| LED2 Status | LED3 Status | LED4 Status | Condition |
|-------------+-------------+-------------+------------------|
| Blinking | Off | Off | TA is resetting |
|-------------+-------------+-------------+------------------|
| Off | Off | Off | Normal operation |
| | | | for channel 1 |
|-------------+-------------+-------------+------------------|
| On | Off | Off | ISDN connection |
| | | | established on |
| | | | channel 1 |
|-------------+-------------+-------------+------------------|
| Alternating | Alternating | Off | Hotline call |
| | | | repetition in |
| | | | progress on |
| | | | channel 1 |
|-------------+-------------+-------------+------------------|
| Blinking | Blinking | Off | Hotline call |
| | | | repetition error |
| | | | on channel 1 |
|-------------+-------------+-------------+------------------|
| Blinking | Off | Off | Hotline active |
| | | | without |
| | | | connection on |
| | | | channel 1 |
|-------------+-------------+-------------+------------------|
| On | Off | Off | Profile editor |
| | | | in use locally |
| | | | on channel 1 |
|-------------+-------------+-------------+------------------|
| On | On | On | Profile editor |
| | | | password being |
| | | | entered on |
| | | | channel 1 |
|-------------+-------------+-------------+------------------|
| On | Blinking | Blinking | Profile editor |
| | | | in use remotely |
| | | | on channel 1 |
|-------------+-------------+-------------+------------------|
| Off | Off | On | Unable to |
| | | | determine |
| | | | correct |
| | | | connection rate |
| | | | on channel 1 |
|-------------+-------------+-------------+------------------|
| Off | On | Off | Buffer has |
| | | | overflowed on |
| | | | channel 1 |
|-------------+-------------+-------------+------------------|
| Alternating | Blinking | Alternating | Checksum error |
| | | | has been |
| | | | detected on |
| | | | channel 1 |
|-------------+-------------+-------------+------------------|
| LED5 Status | LED6 Status | LED7 Status | Condition |
|-------------+-------------+-------------+------------------|
| Blinking | Off | Off | TA is resetting |
|-------------+-------------+-------------+------------------|
| Off | Off | Off | Normal operation |
| | | | for channel 2 |
|-------------+-------------+-------------+------------------|
| On | Off | Off | ISDN connection |
| | | | established on |
| | | | channel 2 |
|-------------+-------------+-------------+------------------|
| Alternating | Alternating | Off | Hotline call |
| | | | repetition in |
| | | | progress on |
| | | | channel 2 |
|-------------+-------------+-------------+------------------|
| Blinking | Blinking | Off | Hotline call |
| | | | repetition error |
| | | | on channel 2 |
|-------------+-------------+-------------+------------------|
| Blinking | Off | Off | Hotline active |
| | | | without |
| | | | connection on |
| | | | channel 2 |
|-------------+-------------+-------------+------------------|
| On | Off | Off | Profile editor |
| | | | in use locally |
| | | | on channel 2 |
|-------------+-------------+-------------+------------------|
| On | On | On | Profile editor |
| | | | password being |
| | | | entered on |
| | | | channel 2 |
|-------------+-------------+-------------+------------------|
| On | Blinking | Blinking | Profile editor |
| | | | in use remotely |
| | | | on channel 2 |
|-------------+-------------+-------------+------------------|
| Off | Off | On | Unable to |
| | | | determine |
| | | | correct |
| | | | connection rate |
| | | | on channel 2 |
|-------------+-------------+-------------+------------------|
| Off | On | Off | Buffer has |
| | | | overflowed on |
| | | | channel 2 |
|-------------+-------------+-------------+------------------|
| Alternating | Blinking | Alternating | Checksum error |
| | | | has been |
| | | | detected on |
| | | | channel 2 |
+------------------------------------------------------------+
Proprietary Command Sets
See document V1971 for a full command summary.