TEXT View Source
# TELEBIT CORPORATION
T1000PC
Card Type Modem (synchronous/asynchronous)
Processor Motorola 68000
Processor Speed Unidentified
Chipset Unidentified
Maximum Data Rate 9600bps
Data Bus 8-bit ISA
Data Modulation Bell 103A/212A
ITU-T V.22, V.22bis
Telebit PEP
Error Correction/Compression MNP5
IMG IMG 1
+------------------------------------------------------------+
| CONNECTIONS |
|------------------------------------------------------------|
| Function | Label | Function | Label |
|------------------------------------------------------------|
| Line in | CN1 | Line out | CN2 |
+------------------------------------------------------------+
+------------------------------------------------------------+
| USER CONFIGURABLE SETTINGS |
|------------------------------------------------------------|
| Setting | Label | Position |
|-------------------------------------+-------+--------------|
| í Factory configured - do not alter | JP1 | Unidentified |
|-------------------------------------+-------+--------------|
| í Factory configured - do not alter | E25 | Unidentified |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SERIAL PORT CONFIGURATION |
|------------------------------------------------------------|
| Address | IRQ | E22 | E23 | E24 |
|----------+------+----------------+------------+------------|
| 3F8h | IRQ4 | Pins 1 & 2 | Pins 1 & 2 | Pins 2 & 3 |
| (COM1:) | | closed | closed | closed |
|----------+------+----------------+------------+------------|
| 2F8h | IRQ3 | Pins 2 & 3 | Pins 1 & 2 | Pins 1 & 2 |
| (COM2:) | | closed | closed | closed |
|----------+------+----------------+------------+------------|
| 3E8h | IRQ4 | Pins 1 & 2 | Pins 2 & 3 | Pins 2 & 3 |
| (COM3:) | | closed | closed | closed |
|----------+------+----------------+------------+------------|
| 2E8h | IRQ3 | Pins 2 & 3 | Pins 2 & 3 | Pins 1 & 2 |
| (COM4:) | | closed | closed | closed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| TRANSMISSION LEVEL SELECTION |
|------------------------------------------------------------|
| Setting | R5 |
|-------------------------------+----------------------------|
| 0 dBm | 4.32K ohm |
|-------------------------------+----------------------------|
| -1.5 dBm | 5.11K ohm |
|-------------------------------+----------------------------|
| -3 dBm | 6.04K ohm |
|-------------------------------+----------------------------|
| -4.5 dBm | 7.15K ohm |
|-------------------------------+----------------------------|
| -6 dBm | 8.66K ohm |
|-------------------------------+----------------------------|
| -7.5 dBm | 10.2K ohm |
|-------------------------------+----------------------------|
| -9 dBm | 12.1K ohm |
|-------------------------------+----------------------------|
| -10.5 dBm | 14.3K ohm |
|-------------------------------+----------------------------|
| -12 dBm | 16.9K ohm |
|-------------------------------+----------------------------|
| -13.5 dBm | 20.5K ohm |
|-------------------------------+----------------------------|
| -15 dBm | 24.3K ohm |
|------------------------------------------------------------|
| Note: R5 is a plug-in resistor that can be used to |
| change the transmitted power level. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| SUPPORTED STANDARD COMMANDS |
|------------------------------------------------------------|
| Basic AT Commands |
|------------------------------------------------------------|
| +++, ‘comma’, A/ |
|------------------------------------------------------------|
| A, C, E, F, H, M, O, V, X, Z |
|------------------------------------------------------------|
| &F, &T |
|------------------------------------------------------------|
| S-Registers |
|------------------------------------------------------------|
| S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S12 |
|------------------------------------------------------------|
| Note: See MHI documentation for complete information. |
+------------------------------------------------------------+
Proprietary AT Command Set
See TELEBIT CORPORATION TRAILBLAZER PLUS PC for a full command
summary.