TEXT View Source
# WILDCARD TECHNOLOGIES, INC.
SATISFAXTION MOBILE PDMCIA9025COMBO
Card Type Modem (asynchronous), Token Ring
Chipset Texas Instruments TMS380C25
Maximum Onboard Memory 160KB DRAM/128KB PROM
Network Transfer Rate 4/16Mbps
Maximum Data Rate 14.4Kbps
Maximum Fax Rate 14.4Kbps
Data Bus PCMCIA Type II
Fax Class Class I & II
Data Modulation Bell 103A/212A
ITU-T V.21, V.22, V.23, V.22bis, V.32,
V.32bis
Fax Modulation Unidentified
Error MNP5, MNP10, V.42, V.42bis
Correction/Compression
Topology Token Ring
Wire Type Shielded/Unshielded twisted pair
Boot ROM Not available
52772
+------------------------------------------------------------+
| SUPPORTED STANDARD COMMANDS |
|------------------------------------------------------------|
| Basic AT Commands |
|------------------------------------------------------------|
| +++, A/ |
|------------------------------------------------------------|
| A, B, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z |
|------------------------------------------------------------|
| &C, &D, &F, &G, &P, &Q, &R, &S, &T, &V, &W, &Y, &Z |
|------------------------------------------------------------|
| Extended AT Commands |
|------------------------------------------------------------|
| \A, \B, \G, \J, \K, \L, \N, \W |
|------------------------------------------------------------|
| %C, %L, %Q |
|------------------------------------------------------------|
| Special AT Commands |
|------------------------------------------------------------|
| -K, -Q, *H, )M, @M, :E, +MS |
|------------------------------------------------------------|
| S-Registers |
|------------------------------------------------------------|
| S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S12, S14, |
| S16, S18, S21, S22, S23, S24, S25, S27, |
|------------------------------------------------------------|
| S28, S29, S30, S31, S32, S33, S36, S37, S38, S39, S40, |
| S41, S46, S48, S82, S86, S91, S92, S95, |
|------------------------------------------------------------|
| S99, S201 |
+------------------------------------------------------------+
Proprietary AT Command Set
+------------------------------------------------------------+
| CALLBACK NUMBER |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] *Pn:xxxx:<#> |
|--------------+---------------------------------------------|
| Description: | Sets callback number at location n with the |
| | password xxxx. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| COMMAND SET |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] S80=n [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the active command set. |
|------------------------------------------------------------|
| Command | Function |
|---------------+--------------------------------------------|
| S80=0 | Switch to AT command set. |
|---------------+--------------------------------------------|
| S80=33 | Switch to V.25bis command set. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| DISPLAY CALLBACK NUMBERS |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] *L [cmds] |
|--------------+---------------------------------------------|
| Description: | Displays the list of all callback numbers. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| END REMOTE CONFIGURATION |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] *E [cmds] |
|--------------+---------------------------------------------|
| Description: | Ends the remote configuration session |
| | currently in progress. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| PROTOCOL/SPEED |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] Fn [cmds] |
|--------------+---------------------------------------------|
| Description: | Selects the protocol and speed the modem |
| | will attempt to connect at. |
|--------------+---------------------------------------------|
| Command | Function |
|--------------+---------------------------------------------|
| F0 | Auto-detect the highest common connect |
| | speed. |
|--------------+---------------------------------------------|
| F1 | Select V.21 or Bell 103 at 300bps speed. |
|--------------+---------------------------------------------|
| F3 | Select V.23 at 75/1200bps speed. |
|--------------+---------------------------------------------|
| F4 | Select V.22 or Bell 212A at 1200bps speed. |
|--------------+---------------------------------------------|
| F5 | Select V.22bis at 2400bps speed. |
|--------------+---------------------------------------------|
| F6 | Select V.32/V.32bis at 4800bps speed. |
|--------------+---------------------------------------------|
| F7 | Select V.32bis at 7200bps speed. |
|--------------+---------------------------------------------|
| F8 | Select V.32/V.32bis at 9600bps speed. |
|--------------+---------------------------------------------|
| F9 | Select V.32bis at 12Kbps speed. |
|--------------+---------------------------------------------|
| F10 | Select V.32bis at 14.4Kbps speed |
+------------------------------------------------------------+
+------------------------------------------------------------+
| REMOTE ESCAPE CHARACTER |
|------------------------------------------------------------|
| Type: | Register |
|--------------+---------------------------------------------|
| Format | AT [cmds] S202=n [cmds] |
|--------------+---------------------------------------------|
| Default: | Unidentified |
|--------------+---------------------------------------------|
| Range: | Unidentified |
|--------------+---------------------------------------------|
| Unit: | 1 ASCII character |
|--------------+---------------------------------------------|
| Description: | Selects a character to be used for escape |
| | sequences during remote configuration |
| | sessions. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| REQUEST REMOTE CONFIGURATION |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | AT [cmds] *R [cmds] |
|--------------+---------------------------------------------|
| Description: | Requests a remote configuration session |
| | with the remote modem. |
+------------------------------------------------------------+
Proprietary V.25bis Command Set
+------------------------------------------------------------+
| CALL REQUESTED NUMBER WITH IDENTIFICATION |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | CRI<#> |
|--------------+---------------------------------------------|
| Description: | Dials the number given. If supported, the |
| | modem’s identification string will be sent |
| | with the number. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| EXECUTE AT COMMAND |
|------------------------------------------------------------|
| Type: | Immediate |
|--------------+---------------------------------------------|
| Format: | CNL[AT cmds] |
|--------------+---------------------------------------------|
| Description: | Executes an AT command string. |
+------------------------------------------------------------+
+------------------------------------------------------------+
| IDENTIFICATION STRING |
|------------------------------------------------------------|
| Type: | Configuration |
|--------------+---------------------------------------------|
| Format: | AT [cmds] PRIxxxx [cmds] |
|--------------+---------------------------------------------|
| Description: | Sets the modem’s identification string to |
| | xxxx. |
+------------------------------------------------------------+
See document WILDCARD TECHNOLOGIES, INC. SATISFAXTION MOBILE