tbrcmfmac43362-sdio.txt - arm-sdk - os build toolkit for various embedded devices
HTML git clone https://git.parazyd.org/arm-sdk
DIR Log
DIR Files
DIR Refs
DIR Submodules
DIR README
DIR LICENSE
---
tbrcmfmac43362-sdio.txt (1121B)
---
1 #AP6210_NVRAM_V1.2_03192013
2 manfid=0x2d0
3 prodid=0x492
4 vendid=0x14e4
5 devid=0x4343
6 boardtype=0x0598
7
8 # Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same
9 #Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305
10 boardrev=0x1307
11 boardnum=777
12 xtalfreq=26000
13 boardflags=0x80201
14 boardflags2=0x80
15 sromrev=3
16 wl0id=0x431b
17 macaddr=00:90:4c:07:71:12
18 aa2g=1
19 ag0=2
20 maxp2ga0=74
21 cck2gpo=0x2222
22 ofdm2gpo=0x44444444
23 mcs2gpo0=0x6666
24 mcs2gpo1=0x6666
25 pa0maxpwr=56
26
27 #P207 PA params
28 #pa0b0=5447
29 #pa0b1=-658
30 #pa0b2=-175<div></div>
31
32 #Same PA params for P304,P305, P306, P307
33
34 pa0b0=5447
35 pa0b1=-607
36 pa0b2=-160
37 pa0itssit=62
38 pa1itssit=62
39
40
41 cckPwrOffset=5
42 ccode=0
43 rssismf2g=0xa
44 rssismc2g=0x3
45 rssisav2g=0x7
46 triso2g=0
47 noise_cal_enable_2g=0
48 noise_cal_po_2g=0
49 swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff
50 temp_add=29767
51 temp_mult=425
52
53 btc_flags=0x6
54 btc_params0=5000
55 btc_params1=1000
56 btc_params6=63
57