t* Run a server HOWTO. - electrum - Electrum Bitcoin wallet
HTML git clone https://git.parazyd.org/electrum
DIR Log
DIR Files
DIR Refs
DIR Submodules
---
DIR commit 94964fdbbaec08c20e4f070ac7a503b1dde149e9
DIR parent 1240e2745d95bfc4fb4a5d38c37eed0ceb809a76
HTML Author: Ovidiu Constantin <ovidiu@mybox.ro>
Date: Wed, 28 Dec 2011 00:45:34 +0200
* Run a server HOWTO.
Diffstat:
A server/HOWTO | 219 +++++++++++++++++++++++++++++++
1 file changed, 219 insertions(+), 0 deletions(-)
---
DIR diff --git a/server/HOWTO b/server/HOWTO
t@@ -0,0 +1,219 @@
+How to run your own Electrum server
+
+
+Abstract
+
+This document is an easy to follow guide to installing and running your own Electrum server on Linux. It is structured as a series of steps you need to follow, ordered in the most logical way. The next two sections describe some conventions we use in this document and hardware, software and expertise requirements.
+
+The most up-to date version of this document is available at: https://gitorious.org/electrum/electrum/blobs/master/server/HOWTO
+
+
+Conventions
+
+In this document, lines starting with a hash sign (#) or a dollar sign ($) contain commands. Commands starting with a hash should be run as root, commands starting with a dollar should be run as a normal user (in this document, we assume that user is called 'bitcoin'). We also assume the bitcoin user has sudo rights, so we use '$ sudo command' when we need to.
+
+Strings that are surrounded by "lower than" and "greater than" ( < and > ) should be replaced by the user with something appropriate. For example, <password> should be replaced by a user chosen password. Do not confuse this notation with shell redirection ('command < file' or 'command > file')!
+
+Lines that are indented with a tab are pastes from config files. They should be copied verbatim or adapted, without the indentation tab.
+
+
+Prerequisites
+
+Expertise. You should be familiar with Linux command line and standard Linux commands. You should have basic understanding of git, Python packages, compiling and applying patches to source code. You should have knowledge about how to install and configure software on your Linux distribution. You should be able to add commands to your distribution's startup scripts. If one of the commands included in this document is not available or does not perform the operation described here, you are expected to fix the issue so you can continue following this howto.
+
+Software. A recent Linux distribution with the following software installed: python, easy_install, git, a SQL server, standard C/C++ build chain. You will need root access in order to install other software or Python libraries. You will need access to the SQL server to create users and databases.
+
+Hardware. Running a Bitcoin node and Electrum server is resource intensive. At the time of this writing, the Bitcoin blockchain is 1.2 GB large. The corresponding SQL database is about 4 time larger, so you should have a minimum of 6.5 GB free space. You should expect the total size to grow with time. CPU speed is also important, mostly for the initial blockchain import, but also if you plan to run a public Electrum server, which could serve tens of concurrent requests. See step 6 below for some initial import benchmarks.
+
+
+Step 0. Create a user for running bitcoind and Electrum server
+
+This step is optional, but for better security and resource separation I suggest you create a separate user just for running bitcoind and Electrum. We will also use the ~/bin directory to keep locally installed files (others might want to use /usr/local/bin instead). We will download source code files to the ~/src directory.
+
+# sudo adduser bitcoin
+# su - bitcoin
+$ mkdir ~/bin ~/src
+$ echo $PATH
+
+If you don't see /home/bitcoin/bin in the output, you should add this line to your .bashrc, .profile or .bash_profile, then logout and relogin:
+
+ PATH="$HOME/bin:$PATH"
+
+
+Step 1. Download and install Electrum
+
+We will download the latest git snapshot for Electrum and 'install' it in our ~/bin directory:
+
+$ cd ~/src
+$ git clone git://gitorious.org/electrum/electrum.git
+$ chmod +x ~/src/electrum/server/server.py
+$ ln -s ~/src/electrum/server/server.py ~/bin/electrum-server
+
+
+Step 2. Install a patched version of bitcoind
+
+Electrum server requires some small modifications to the bitcoind daemon. The patch is included in the Electrum sources we just downloaded, now we will download the Bitcoin sources, patch, compile and install the binary to our ~/bin directory.
+
+$ cd ~/src
+$ wget https://github.com/bitcoin/bitcoin/tarball/v0.5.1 -O bitcoin-0.5.1.tgz
+$ tar xvzf bitcoin-0.5.1.tgz
+$ mv bitcoin-bitcoin-5623ee7 bitcoin-0.5.1
+$ cd bitcoin-0.5.1/src
+$ patch -p 2 < ~/src/electrum/server/patches/bitcoin-0.5.1.diff
+$ make -f makefile.unix
+$ strip bitcoind
+$ mv bitcoind ~/bin
+
+
+Step 3. Configure and start bitcoind.
+
+In order to allow Electrum to "talk" to bitcoind, we need to set up a RPC username and password for bitcoind. We will then start bitcoind and wait for it to complete downloading the blockchain.
+
+$ mkdir ~/.bitcoin
+$ $EDITOR ~/.bitcoin/bitcoin.conf
+
+ rpcuser=<rpc-username>
+ rpcpassword=<rpc-password>
+
+$ bitcoind &
+
+Allow some time to pass, so bitcoind connects to the network and starts downloading blocks. You can check its progress by running:
+
+$ bitcoind getinfo
+
+You should also set up your system to automatically start bitcoind at boot time, running as the 'bitcoin' user. Check your system documentation to find out the best way to do this.
+
+
+Step 4. Install Electrum dependencies
+
+Electrum server depends on various standard Python libraries. These will be already installed on your distribution, or can be installed with your package manager. Electrum also depends on two Python libraries which we will need to install "by hand": Abe and JSONRPClib.
+
+$ sudo easy_install jsonrpclib
+$ cd ~/src
+$ git clone git://github.com/jtobey/bitcoin-abe.git
+$ cd bitcoin-abe
+$ sudo python setup.py install
+$ sudo chmod +x /usr/local/lib/python2.7/dist-packages/Abe/abe.py
+$ ln -s /usr/local/lib/python2.7/dist-packages/Abe/abe.py ~/bin/abe
+
+
+Step 5. Configure the database
+
+Electrum server uses a SQL database to store the blockchain data. In theory, it supports all databases supported by Abe. At the time of this writing, MySQL and PostgreSQL are tested and work ok, SQLite was tested and does not work with Electrum server.
+
+For MySQL:
+
+$ mysql -u root -p
+mysql> create user 'electrum'@'localhost' identified by '<database-password>';
+mysql> create database electrum;
+mysql> grant all on electrum.* to 'electrum'@'localhost';
+mysql> exit
+
+For PostgreSQL:
+
+TDB!
+
+
+Step 6. Configure Abe and import blockchain into the database
+
+When you run Electrum server for the first time, it will automatically import the blockchain into the database, so it is safe to skip this step. However, our tests showed that, at the time of this writing, importing the blockchaind via Abe is much faster (about 20-30 times faster) than allowing Electrum to do it.
+
+$ cp ~/src/bitcoin-abe/abe.conf ~/abe.conf
+$ $EDITOR ~/abe.conf
+
+For MySQL, you need these lines:
+
+ dbtype MySQLdb
+ connect-args = { "db" : "electrum", "user" : "electrum" , "passwd" : "<database-password>" }
+
+For PostgreSQL, you need these lines:
+
+ TBD!
+
+Start Abe:
+
+$ abe --config ~/abe.conf
+
+Abe will now start to import blocks. You will see a lot of lines like this: 'block_tx <block-number> <tx-number>'. You should wait until you see this message on the screen:
+
+Listening on http://localhost:2750
+
+It means the blockchain is imported and you can exit Abe by pressing CTRL-C.
+
+Important notice: This is a *very* long process. Even on fast machines you can expect it to take hours. Here are some benchmarks for importing ~159.400 blocks (size of the Bitcoin blockchain at the time of this writing):
+
+System 1: ~8 hours.
+ * CPU: Intel Core i7 Q740 @ 1.73GHz
+ * HDD: very fast SSD
+System 2: ~48 hours.
+ * CPU: Intel Xeon X3430 @ 2.40GHz
+ * HDD: 2 x SATA in a RAID1.
+
+
+Step 7. Configure Electrum server
+
+Electrum reads a config file (/etc/electrum.conf) when starting up. This file includes the database setup, bitcoind RPC setup and a few other options.
+
+$ sudo cp ~/src/electrum/server/electrum.conf.sample /etc/electrum.conf
+$ sudo $EDITOR /etc/electrum.conf
+
+ # sample server config for a public Electrum server
+ [server]
+ host = host-fqdn
+ port = 50000
+ password = <electrum-server-password>
+ banner = Welcome to Electrum server!
+ irc = yes
+ ircname = public Electrum server
+ cache = yes
+
+ # sample server config for a private (does not advertise on IRC) Electrum server
+ [server]
+ host = localhost
+ port = 50000
+ password = <electrum-server-password>
+ banner = Welcome to Electrum server!
+ irc = no
+ ircname = foo
+ cache = yes
+
+ # database setup - MySQL
+ [database]
+ type = MySQLdb
+ database = electrum
+ username = electrum
+ password = <database-password>
+
+ # database setup - PostgreSQL
+ TBD!
+
+ # bitcoind RPC setup
+ [bitcoind]
+ host = localhost
+ port = 8332
+ user = <rpc-username>
+ password = <rpc-password>
+
+
+Step 8. (Finally!) Run Electrum server
+
+The magic moment has come: you can now start your Electrum server:
+
+$ electrum-server
+
+You should see this on the screen:
+
+starting Electrum server
+cache: yes
+
+If you want to stop Electrum server, open another shell and run:
+
+$ electrum-server stop
+
+You should also take a look at the 'start' and 'stop' scripts in ~/src/electrum/server . You can use them as a starting point to create a init script for your system.
+
+
+9. Test the Electrum server
+
+We will assume you have a working Electrum client, a wallet and some transactions history. You should start the client and click on the green check mark (last button on the right of the status bar) to open the Server selection window. If your server is public, you should see it in the list and you can select it. If you server is private, you need to enter its IP or hostname and the port. Press Ok, the client will disconnect from the current server and connect to your new Electrum server. You should see your addresses and transactions history. You can see the number of blocks and response time in the Server selection window. You should send/receive some bitcoins to confirm that everything is working properly.
+