tapp-laptop/tp_smapi: Add 0.42 - parlay - yet another gentoo overlay
HTML git clone https://git.parazyd.org/parlay
DIR Log
DIR Files
DIR Refs
DIR README
---
DIR commit bc22766cb82a472b6fce2993c85b9e30e7e98191
DIR parent 13025d676de08597f7f31523bdb274d0b556dbfc
HTML Author: parazyd <parazyd@dyne.org>
Date: Thu, 21 Jul 2016 13:09:14 +0200
app-laptop/tp_smapi: Add 0.42
Diffstat:
A app-laptop/tp_smapi/Manifest | 1 +
A app-laptop/tp_smapi/files/tp_smapi… | 20 ++++++++++++++++++++
A app-laptop/tp_smapi/files/tp_smapi… | 92 +++++++++++++++++++++++++++++++
A app-laptop/tp_smapi/tp_smapi-0.42.… | 75 +++++++++++++++++++++++++++++++
4 files changed, 188 insertions(+), 0 deletions(-)
---
DIR diff --git a/app-laptop/tp_smapi/Manifest b/app-laptop/tp_smapi/Manifest
t@@ -0,0 +1 @@
+DIST tp_smapi-0.42.tgz 39867 SHA256 7b8d9f488c3859805f1f292bf4d518cc5b32ebb69b0ebe96367d0852dd792d27 SHA512 1004b7ef961a9908c2144b26ea60b6dddabd83d60c11421a03e3b810f5b635415ef52656d6980915512d68f809f7bc3d662328f25d111537bd7e175d252cf83b WHIRLPOOL 7d03aaf2bb4de3aabbc38fba62f126e6f2976ea1964d85da2fffbbcd63bb4c3884a152851cae116438b859c13d59fd4e41be126683f660f9b8322d7fc40ddc28
DIR diff --git a/app-laptop/tp_smapi/files/tp_smapi-0.40-confd b/app-laptop/tp_smapi/files/tp_smapi-0.40-confd
t@@ -0,0 +1,20 @@
+# /etc/conf.d/smapi: config file for /etc/init.d/smapi
+
+# use '/etc/init.d/smapi info' at any time to check the thresholds
+# currently used by the driver
+# Note that the kernel does some sanity checking on the values and
+# will not accept any combination of values you may try to set up.
+# (i.e. stop value lower than start) So if the output of info does
+# not match what you wanted the driver probably did not like your
+# configuration.
+
+# default thresholds for '/etc/init.d/smapi start'
+SMAPI_THRESH_START="30"
+SMAPI_THRESH_STOP="85"
+# values to be used for '/etc/init.d/smapi low'
+SMAPI_LOW_THRESH_START="${SMAPI_THRESH_START}"
+SMAPI_LOW_THRESH_STOP="${SMAPI_THRESH_STOP}"
+
+# values to be used for '/etc/init.d/smapi high'
+SMAPI_HIGH_THRESH_START="95"
+SMAPI_HIGH_THRESH_STOP="100"
DIR diff --git a/app-laptop/tp_smapi/files/tp_smapi-0.40-initd b/app-laptop/tp_smapi/files/tp_smapi-0.40-initd
t@@ -0,0 +1,92 @@
+#!/sbin/openrc-run
+# Copyright (C) 2011 Henning Schild <henning@wh9.tu-dresden.de>
+# Copyright (C) 2011 Sebastian Pipping <sebastian@pipping.org>
+#
+# Distributed under the terms of the GNU General Public License, v2 or later
+
+extra_started_commands="low high info"
+
+SMAPI_SYSFS="/sys/devices/platform/smapi"
+BATS="BAT0 BAT1"
+
+depend() {
+ after modules
+}
+
+start() {
+ local state1
+ local state2
+
+ ebegin "Making sure that module 'tp_smapi' is loaded"
+ modprobe tp_smapi
+ state1=$?
+ eend ${state1}
+
+ ebegin "Checking for \"${SMAPI_SYSFS}\""
+ test -d "${SMAPI_SYSFS}"
+ state2=$?
+ eend ${state2}
+
+ if [ "${state1}" -ne "0" ] || [ "${state2}" -ne "0" ]; then
+ return 1
+ fi
+
+ ebegin "Starting ${SVCNAME}"
+ set_all ${SMAPI_THRESH_START} ${SMAPI_THRESH_STOP}
+ eend $?
+}
+
+stop() {
+ einfo "Nothing required to be done to stop ${SVCNAME}"
+}
+
+require_started() {
+ if ! service_started; then
+ "${RC_SERVICE}" start || return $?
+ fi
+}
+
+high() {
+ require_started
+
+ einfo "Switching ${SVCNAME} to high thesholds"
+ set_all ${SMAPI_HIGH_THRESH_START} ${SMAPI_HIGH_THRESH_STOP}
+}
+
+low() {
+ require_started
+
+ einfo "Switching ${SVCNAME} to low thesholds"
+ set_all ${SMAPI_LOW_THRESH_START} ${SMAPI_LOW_THRESH_STOP}
+}
+
+set_all() {
+ local tstart=$1
+ local tstop=$2
+ local bat
+
+ for bat in ${BATS}; do
+ ebegin " setting thresholds for ${bat}: $tstart $tstop"
+ echo ${tstart} > ${SMAPI_SYSFS}/${bat}/start_charge_thresh
+ echo ${tstop} > ${SMAPI_SYSFS}/${bat}/stop_charge_thresh
+ eend $?
+ done
+}
+
+info() {
+ local presence
+ local tstart
+ local tstop
+ local bat
+
+ require_started
+
+ for bat in ${BATS}; do
+ tstart=$(cat ${SMAPI_SYSFS}/${bat}/start_charge_thresh)
+ tstop=$(cat ${SMAPI_SYSFS}/${bat}/stop_charge_thresh)
+ if [ "$(cat ${SMAPI_SYSFS}/${bat}/installed)" -eq "1" ]; then
+ presence=" [installed]"
+ fi
+ einfo "${bat}: ${tstart} ${tstop}${presence}"
+ done
+}
DIR diff --git a/app-laptop/tp_smapi/tp_smapi-0.42.ebuild b/app-laptop/tp_smapi/tp_smapi-0.42.ebuild
t@@ -0,0 +1,75 @@
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI=5
+
+inherit flag-o-matic linux-mod
+
+DESCRIPTION="IBM ThinkPad SMAPI BIOS driver"
+HOMEPAGE="https://github.com/evgeni/tp_smapi/ http://tpctl.sourceforge.net/"
+SRC_URI="https://github.com/evgeni/${PN}/releases/download/tp-smapi%2F${PV}/${P}.tgz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~x86"
+
+IUSE="hdaps"
+
+RESTRICT="userpriv"
+
+# We need dmideode if the kernel does not support DMI_DEV_TYPE_OEM_STRING
+# in dmi.h
+DEPEND="sys-apps/dmidecode"
+RDEPEND="${DEPEND}"
+
+pkg_pretend() {
+ linux-mod_pkg_setup
+
+ if kernel_is lt 2 6 19; then
+ eerror
+ eerror "${P} requires Linux kernel 2.6.19 or above."
+ eerror
+ die "Unsupported kernel version"
+ fi
+
+ MODULE_NAMES="thinkpad_ec(extra:) tp_smapi(extra:)"
+ BUILD_PARAMS="KSRC=${KV_DIR} KBUILD=${KV_OUT_DIR}"
+ BUILD_TARGETS="default"
+
+ if use hdaps; then
+ CONFIG_CHECK="~INPUT_UINPUT"
+ WARNING_INPUT_UINPUT="Your kernel needs uinput for the hdaps module to perform better"
+ linux-info_pkg_setup
+
+ MODULE_NAMES="${MODULE_NAMES} hdaps(extra:)"
+ BUILD_PARAMS="${BUILD_PARAMS} HDAPS=1"
+
+ CONFIG_CHECK="~!SENSORS_HDAPS"
+ ERROR_SENSORS_HDAPS="${P} with USE=hdaps conflicts with in-kernel HDAPS (CONFIG_SENSORS_HDAPS)"
+ linux-info_pkg_setup
+ fi
+}
+
+pkg_setup() {
+ # run again as pkg_pretend is not var safe
+ pkg_pretend
+}
+
+src_compile() {
+ # Kernel Makefiles may pull in -mpreferred-stack-boundary=3
+ # which requires that SSE disabled or compilation will fail.
+ # So we need to ensure that appended user CLAGS do not re-enable SSE
+ # https://bugs.gentoo.org/show_bug.cgi?id=492964
+ replace-flags '-msse*' ''
+ replace-flags '-mssse3' ''
+
+ linux-mod_src_compile
+}
+
+src_install() {
+ linux-mod_src_install
+ dodoc CHANGES README
+ newinitd "${FILESDIR}"/${PN}-0.40-initd smapi
+ newconfd "${FILESDIR}"/${PN}-0.40-confd smapi
+}