trpi-boot: Use actually working boot blobs. - uwu - hardware bitcoin wallet software and build system
HTML git clone https://git.parazyd.org/uwu
DIR Log
DIR Files
DIR Refs
DIR README
DIR LICENSE
---
DIR commit 76685eac09e017c4ea2fffe1934f797d42baa8cf
DIR parent 2ec2cfed49afc9cc03b0ff0a395920c6fdabf5a4
HTML Author: parazyd <parazyd@dyne.org>
Date: Fri, 27 Nov 2020 13:24:40 +0100
rpi-boot: Use actually working boot blobs.
Should equal 2020-08-20-raspios-buster-armhf-lite.img from the
foundation.
Diffstat:
M rpi-boot/bootcode.bin | 0
D rpi-boot/cmdline.txt | 1 -
M rpi-boot/config.txt | 43 +++++--------------------------
M rpi-boot/fixup.dat | 0
M rpi-boot/fixup_cd.dat | 0
M rpi-boot/fixup_db.dat | 0
M rpi-boot/fixup_x.dat | 0
M rpi-boot/start.elf | 0
M rpi-boot/start_cd.elf | 0
M rpi-boot/start_db.elf | 0
M rpi-boot/start_x.elf | 0
A rpi-boot/upstream/cmdline.txt | 1 +
12 files changed, 7 insertions(+), 38 deletions(-)
---
DIR diff --git a/rpi-boot/bootcode.bin b/rpi-boot/bootcode.bin
Binary files differ.
DIR diff --git a/rpi-boot/cmdline.txt b/rpi-boot/cmdline.txt
t@@ -1 +0,0 @@
-console=ttyGS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 fsck.repair=yes rootwait
DIR diff --git a/rpi-boot/config.txt b/rpi-boot/config.txt
t@@ -1,38 +1,7 @@
-# Path to kernel binary
-kernel=Image
-
-# Path to device tree
-device_tree=bcm-2835-rpi-zero.dtb
-
-# Initramfs and loadaddr
-#initramfs initramfs.gz followkernel
-
-# Misc
-#avoid_warnings=2
-
-# Wishful boot speedups
+[all]
+enable_uart=1
+upstream_kernel=1
+avoid_warnings=2
+#gpu_mem=16
disable_splash=1
-#boot_delay=0
-gpu_mem=16
-#start_file=start_cd.elf
-#fixup_file=fixup_cd.elf
-
-# There are two framebuffers when an SPI display is attached:
-#
-# - /dev/fb0 - represents the HDMI output. This output is hardware-accelerated
-# and therefore should be the target of GUIs
-# - /dev/fb1 - represents the SPI/LCD output
-#
-# The following settings enable a custom mode (mode 87) that sets the HDMI
-# output to the same resolution as the LCD. This is useful so an application
-# can target the hardware-accelerated output, and the raspi2fb tool can be
-# used to mirror the output to the LCD.
-#
-# The HDMI group forces DMT output even on the HDMI output. DMT is the
-# standard for monitors, in contrast to CEA, the standard for TVs.
-
-framebuffer_width=250
-framebuffer_height=122
-hdmi_cvt 250 122 60 1 0 0 0
-hdmi_mode=87
-hdmi_group=2
+boot_delay=0
DIR diff --git a/rpi-boot/fixup.dat b/rpi-boot/fixup.dat
Binary files differ.
DIR diff --git a/rpi-boot/fixup_cd.dat b/rpi-boot/fixup_cd.dat
Binary files differ.
DIR diff --git a/rpi-boot/fixup_db.dat b/rpi-boot/fixup_db.dat
Binary files differ.
DIR diff --git a/rpi-boot/fixup_x.dat b/rpi-boot/fixup_x.dat
Binary files differ.
DIR diff --git a/rpi-boot/start.elf b/rpi-boot/start.elf
Binary files differ.
DIR diff --git a/rpi-boot/start_cd.elf b/rpi-boot/start_cd.elf
Binary files differ.
DIR diff --git a/rpi-boot/start_db.elf b/rpi-boot/start_db.elf
Binary files differ.
DIR diff --git a/rpi-boot/start_x.elf b/rpi-boot/start_x.elf
Binary files differ.
DIR diff --git a/rpi-boot/upstream/cmdline.txt b/rpi-boot/upstream/cmdline.txt
t@@ -0,0 +1 @@
+console=ttyAMA0,115200 console=ttyGS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait