URI: 
       tAdd Raspberry Pi firmware blobs and .txt files. - uwu - hardware bitcoin wallet software and build system
  HTML git clone https://git.parazyd.org/uwu
   DIR Log
   DIR Files
   DIR Refs
   DIR README
   DIR LICENSE
       ---
   DIR commit 8c820dd294e8d210002659c0db33c1e0beac1e96
   DIR parent f7b7a4341a7c9719eec08d5afc5b018422762285
  HTML Author: parazyd <parazyd@dyne.org>
       Date:   Sat, 21 Nov 2020 01:47:03 +0100
       
       Add Raspberry Pi firmware blobs and .txt files.
       
       Diffstat:
         A rpi-boot/LICENCE.broadcom           |      31 +++++++++++++++++++++++++++++++
         A rpi-boot/bootcode.bin               |       0 
         A rpi-boot/cmdline.txt                |       1 +
         A rpi-boot/config.txt                 |      26 ++++++++++++++++++++++++++
         A rpi-boot/fixup.dat                  |       0 
         A rpi-boot/fixup_cd.dat               |       0 
         A rpi-boot/fixup_db.dat               |       0 
         A rpi-boot/fixup_x.dat                |       0 
         A rpi-boot/start.elf                  |       0 
         A rpi-boot/start_cd.elf               |       0 
         A rpi-boot/start_db.elf               |       0 
         A rpi-boot/start_x.elf                |       0 
       
       12 files changed, 58 insertions(+), 0 deletions(-)
       ---
   DIR diff --git a/rpi-boot/LICENCE.broadcom b/rpi-boot/LICENCE.broadcom
       t@@ -0,0 +1,31 @@
       +Copyright (c) 2006, Broadcom Corporation.
       +Copyright (c) 2015, Raspberry Pi (Trading) Ltd
       +All rights reserved.
       +
       +Redistribution.  Redistribution and use in binary form, without
       +modification, are permitted provided that the following conditions are
       +met:
       +
       +* This software may only be used for the purposes of developing for, 
       +  running or using a Raspberry Pi device, or authorised derivative
       +  device manufactured via the element14 Raspberry Pi Customization Service
       +* Redistributions must reproduce the above copyright notice and the
       +  following disclaimer in the documentation and/or other materials
       +  provided with the distribution.
       +* Neither the name of Broadcom Corporation nor the names of its suppliers
       +  may be used to endorse or promote products derived from this software
       +  without specific prior written permission.
       +
       +DISCLAIMER.  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
       +CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
       +BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
       +FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
       +COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
       +INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
       +BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
       +OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
       +ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
       +TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
       +USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
       +DAMAGE.
       +
   DIR diff --git a/rpi-boot/bootcode.bin b/rpi-boot/bootcode.bin
       Binary files differ.
   DIR diff --git a/rpi-boot/cmdline.txt b/rpi-boot/cmdline.txt
       t@@ -0,0 +1 @@
       +console=serial0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 fsck.repair=yes rootwait
   DIR diff --git a/rpi-boot/config.txt b/rpi-boot/config.txt
       t@@ -0,0 +1,26 @@
       +kernel=zImage
       +device_tree=bcm-2835-rpi-zero.dtb
       +#avoid_warnings=2
       +gpu_mem=16
       +#initramfs initramfs.gz followkernel
       +disable_splash=1
       +
       +# There are two framebuffers when an SPI display is attached:
       +#
       +# - /dev/fb0 - represents the HDMI output. This output is hardware-accelerated
       +#              and therefore should be the target of GUIs
       +# - /dev/fb1 - represents the SPI/LCD output
       +#
       +# The following settings enable a custom mode (mode 87) that sets the HDMI
       +# output to the same resolution as the LCD. This is useful so an application
       +# can target the hardware-accelerated output, and the raspi2fb tool can be
       +# used to mirror the output to the LCD.
       +#
       +# The HDMI group forces DMT output even on the HDMI output. DMT is the
       +# standard for monitors, in contrast to CEA, the standard for TVs.
       +
       +framebuffer_width=250
       +framebuffer_height=122
       +hdmi_cvt 250 122 60 1 0 0 0
       +hdmi_mode=87
       +hdmi_group=2
   DIR diff --git a/rpi-boot/fixup.dat b/rpi-boot/fixup.dat
       Binary files differ.
   DIR diff --git a/rpi-boot/fixup_cd.dat b/rpi-boot/fixup_cd.dat
       Binary files differ.
   DIR diff --git a/rpi-boot/fixup_db.dat b/rpi-boot/fixup_db.dat
       Binary files differ.
   DIR diff --git a/rpi-boot/fixup_x.dat b/rpi-boot/fixup_x.dat
       Binary files differ.
   DIR diff --git a/rpi-boot/start.elf b/rpi-boot/start.elf
       Binary files differ.
   DIR diff --git a/rpi-boot/start_cd.elf b/rpi-boot/start_cd.elf
       Binary files differ.
   DIR diff --git a/rpi-boot/start_db.elf b/rpi-boot/start_db.elf
       Binary files differ.
   DIR diff --git a/rpi-boot/start_x.elf b/rpi-boot/start_x.elf
       Binary files differ.