Subject FAQ: Audio File Formats (version 2.3) Submitted-by Guido van Rossum Last-modified 9-Jul-1992 Lines 1365 FAQ: Audio File Formats (version 2.3) ===================================== Table of contents ----------------- Introduction Device characteristics Popular sampling rates Compression schemes Current hardware File formats File conversions Playing audio files on UNIX Playing audio files on micros The Sound Site Newsletter Posting sounds Appendices: FTP access for non-internet sites AIFF Format (Audio IFF) The NeXT/Sun audio file format IFF/8SVX Format Playing sound on a PC The EA-IFF-85 documentation US Federal Standard 1016 availability Creative Voice (VOC) file format RIFF WAVE (.WAV) file format Introduction ------------ This is version 2 of this FAQ, which I started in November 1991 under the name "The audio formats guide". I bumped the major version number since the Subject and Newsgroups headers have changed to make the subject more informative and give the guide a wider audience. I also added a Table of contents section at the top. I am posting this about once a fortnight, either unchanged (just to inform new readers), or updated (if I learn more or when new hardware or software becomes popular). I post to alt.binaries.sounds.{misc,d} and to comp.dsp, for maximal coverage of people interested in audio, and to news.answers, for easy reference. A companion posting with subject "Change to: ..." is occasionally posted listing the diffs between a new version and the last. This is not reposted, and it is suppressed when the diffs are bigger than the new version. Send updates, comments and questions to ; flames to /dev/null. I'd like to thank everyone who sent me mail with updates for previous versions. The list of names is really too long to list you all... --Guido van Rossum, CWI, Amsterdam "Fear, surprise, ruthless efficiency, a fanatical devotion to the pope, and nice red uniforms." Device characteristics ---------------------- In this text, I will only use the term "sample" to refer to a single output value from an A/D converter, i.e., a small integer number (usually 8 or 16 bits). Audio data is characterized by the following parameters, which correspond to settings of the A/D converter when the data was recorded. Naturally, the same settings must be used to play the data. - sampling rate (in samples per second), e.g. 8000 or 44100 - number of bits per sample, e.g. 8 or 16 - number of channels (1 for mono, 2 for stereo, etc.) Approximate sampling rates are often quoted in Hz or kHz ([kilo-] Hertz), however, the politically correct term is samples per second (samples/sec). Sampling rates are always measured per channel, so for stereo data recorded at 8000 samples/sec, there are actually 16000 samples in a second. I will sometimes write 8 k as a shorthand for 8000 samples/sec. Multi-channel samples are generally interleaved on a frame-by-frame basis: if there are N channels, the data is a sequence of frames, where each frame contains N samples, one from each channel. (Thus, the sampling rate is really the number of *frames* per second.) For stereo, the left channel usually comes first. The specification of the number of bits for U-LAW (pronounced mu-law -- the u really stands for the Greek letter mu) samples is somewhat problematic. These samples are logarithmically encoded in 8 bits, like a tiny floating point number; however, their dynamic range is that of 14 bit linear data. Source for converting to/from U-LAW (written by Jef Poskanzer) is distributed as part of the SOX package mentioned below; it can easily be ripped apart to serve in other applications. The official definition is the CCITT standard G.711. (There exists another encoding similar to U-LAW, called A-LAW, which is used as a European telephony standard. I don't know how it differs from U-LAW. There is less support for it in UNIX workstations.) Popular sampling rates ---------------------- Some sampling rates are more popular than others, for various reasons. Some recording hardware is restricted to (approximations of) some of these rates, some playback hardware has direct support for some. The popularity of divisors of common rates can be explained by the simplicity of clock frequency dividing circuits :-). Samples/sec Description 5500 One fourth of the Mac sampling rate (rarely seen). 7333 One third of the Mac sampling rate (rarely seen). 8000 Exactly 8000 samples/sec is a telephony standard that goes together with U-LAW (and also A-LAW) encoding. Some systems use an approximation; in particular, the NeXT workstation uses 8012.8210513 samples/sec. (Can anyone explain why? SGI software calls this rate "codec-rate".) 11 k Either 11025, a quarter of the CD sampling rate, or half the Mac sampling rate (perhaps the most popular rate on the Mac). 16000 Used by, e.g. the G.722 compression standard. 22 k Either 22050, half the CD sampling rate, or the Mac rate; the latter is precisely 22254.545454545454 but usually misquoted as 22000. 32000 Used in digital radio, NICAM (Nearly-Instantaneous Companded Audio Multiplex [IBA/BREMA/BBC]) and other TV work, at least in the UK; also some DAT machines can do it. It is also the standard long play speed for DAT non linear encoding. 44056 This weird rate is used by professional audio equipment to fit an integral number of samples in a video frame. 44100 The CD sampling rate. (Professional DAT also supports this rate.) 48000 The DAT (Digital Audio Tape) sampling rate for domestic use. Files samples on SoundBlaster hardware have sampling rates that are divisors of 1000000. While professinal musicians disagree, most people don't have a problem if recorded sound is played at a slightly different rate, say, 1-2%. On the other hand, if recorded data is being fed into a playback device in real time (say, over a network), even the smallest difference in sampling rate can frustrate the buffering scheme used... There may be an emerging tendency to standardize on only a few sampling rates and encoding styles, even if the file formats may differ. The suggested rates and styles are: rate (samp/sec) style mono/stereo 8000 8-bit U-LAW mono 22050 8-bit linear unsigned mono and stereo 44100 16-bit linear signed mono and stereo Compression schemes ------------------- Strange though it seems, audio data is remarkably hard to compress effectively. For 8-bit data, a Huffman encoding of the deltas between successive samples is relatively successful. For 16-bit data, companies like Sony and Philips have spent millions to develop proprietary schemes. Public standards for voice compression are slowly gaining popularity, e.g. CCITT G.721 and G.723 (ADPCM at 32 and 24 kbits/sec). (ADPCM == Adaptive Delta Pulse Code Modulation.) Free source code for a *fast* 32 kbits/sec ADPCM algorithm is available by ftp from ftp.cwi.nl as /pub/adpcm.shar. There are also two US federal standards, 1016 (Code excited linear prediction (CELP), 4800 bits/s) and 1015 (LPC-10E, 2400 bits/s). See also the appendix for 1016. (Note that U-LAW and silence detection can also be considered compression schemes.) Finally, the comp.compression FAQ has some text on the 6:1 audio compression scheme used by MPEG (a video compression standard-to-be). It's interesting to note that video compression reaches much higher ratios (like 26:1). Current hardware ---------------- I am aware of the following computer systems that can play back and (sometimes) record audio data, with their characteristics. Note that for most systems you can also buy "professional" sampling hardware, which supports much better quality, e.g. >= 44.1 k 16 bits stereo. The characteristics listed here are a rough estimate of the capabilities of the basic hardware only (and even here I am on thin ice, with systems becoming ever more powerful). machine bits max sampling rate #output channels Mac 8 22k 1 Apple IIgs 8 32k / >70k 8(st) PC/Soundblaster 8 13k /22k 1 Atari ST 8 22k 1 Atari STe,TT 8 50k 2 Amiga 8 ~29k 4(st) Sun Sparc U-LAW 8k 1 NeXT U-LAW,8,16 44.1k 1(st) SGI Indigo 8,16 48k 4(st) Acorn Archimedes ~U-LAW ~180k 8(st) Sony RISC-NEWS 8, 16 37.8k ?(st) VAXstation 4000 U-LAW 8k 1 Tandy 1000/[TS]L 8-bit 22k 3 4(st) means "four voices, stereo"; sampling rates xx/yy are different recording/playback rates. All these machines can play back sound without additional hardware, although the needed software is not always standard; only the Sun, NeXT and SGI come with standard sampling hardware (the NeXT only samples U-LAW at 8000 samples/sec from the built-in microphone port; you need a separate board for other rates). The new VAXstation 4000 series lets you PLAY audio (.au) files, and the as-of-yet-unreleased package, DECsound, will let you do the recording. The SGI Personal IRIS 4D/30 and 4D/35 have the same capabilities as the Indigo. The new Apple Macs have more powerful audio hardware; the latest models have built-in microphones. Software exists for the PC that can play sound on its 1-bit speaker using pulse width modulation (see appendix); the Soundblaster board records at rates up to 13 k and plays back up to 22 k (weird combination, but that's the way it is). On the NeXT, the Motorola 56001 DSP chip is programmable and you can (in principle) do what you want. The SGI uses the same DSP chip but it can't be programmed by users -- SGI prefers to offer it as a shared system resource to multiple applications, thus enabling developers to program audio with their Audio Library and avoid code modifications for execution on future machines with different audio hardware, i.e. a different DSP. The Amiga also has a 6-bit volume, which can be used to produce something like a 14-bit output for each voice. The hardware can also use one of each voice-pair to modulate the other in FM (period) or AM (volume, 6-bits). The Acorn Archimedes uses a variation on U-LAW with the bit order reversed and the sign bit in bit 0. Being a 'minority' architecture, Arc owners are quite adept at converting sound/image formats from other machines, and it is unlikely that you'll ever encounter sound in one of the Arc's own formats (there are several). CD-I machines form a special category. The following formats are used: - PCM 44.1 kHz standard CD format - ADPCM - Addaptive Delta PCM - Level A 37.8 kHz 8-bit - Level B 37.8 kHz 4-bit - Level C 18.9 kHz 4-bit File formats ------------ Historically, almost every type of machine used its own file format for audio data, but some file formats are more generally applicable, and in general it is possible to define conversions between almost any pair of file formats -- sometimes losing information, however. File formats are a separate issue from device characteristics. There are two types of file formats: self-describing formats, where the device parameters and encoding are made explicit in some form of header, and "raw" formats, where the device parameters and encoding are fixed. Self-describing file formats generally define a family of data encodings, where a header fields indicates the particular encoding variant used. Headerless formats define a single encoding and usually allows no variation in device parameters (except sometimes sampling rate, which can be a pain to figure out other than by listening to the sample). The header of self-describing formats contains the parameters of the sampling device and sometimes other information (e.g. a human-readable description of the sound, or a copyright notice). Most headers begin with a simple "magic word". (Some formats do not simply define a header format, but may contain chunks of data intermingled with chunks of encoding info.) The data encoding defines how the actual samples are stored in the file, e.g. signed or unsigned, as bytes or short integers, in little-endian or big-endian byte order, etc. Strictly spoken, channel interleaving is also part of the encoding, although so far I have seen little variation in this area. Some file formats apply some kind of compression to the data, e.g. Huffman encoding, or simple silence deletion. Here's an overview of popular file formats. Self-describing file formats ---------------------------- extension, name origin variable parameters (fixed; comments) ..au or .snd NeXT, Sun rate, #channels, encoding, info string ..aif(f), AIFF Apple, SGI rate, #channels, sample width, lots of info ..aif(f), AIFC Apple, SGI same (extension of AIFF with compression) ..iff, IFF/8SVX Amiga rate, #channels, instrument info (8 bits) ..voc Soundblaster rate (8 bits/1 ch; can use silence deletion) ..wav, WAVE Microsoft rate, #channels, sample width, lots of info ..sf IRCAM rate, #channels, encoding, info none, HCOM Mac rate (8 bits/1 ch; uses Huffman compression) none, MIME Internet (see below) ..mod or .nst Amiga (see below) Note that the filename extension ".snd" is ambiguous: it can be either the self-describing NeXT format or the headerless Mac/PC format, or even a headerless Amiga format. I know nothing for sure about the origin of HCOM files, only that there are a lot of them floating around on our system and probably at FTP sites over the world. The filenames usually don't have a ".hcom" extension, but this is what SOX (see below) uses. The file format recognized by SOX includes a MacBinary header, where the file type field is "FSSD". The data fork begins with the magic word "HCOM" and contains Huffman compressed data; after decompression it it is 8 bits unsigned data. IFF/8SVX allows for amplitude contours for sounds (attack/decay/etc). Compression is optional (and extensible); volume is variable; author, notes and copyright properties; etc. AIFF, AIFC and WAVE are similar in spirit but allow more freedom in encoding style (other than 8 bit/sample), amongst others. There are other sound formats in use on Amiga by digitizers and music programs, such as IFF/SMUS. Appendices describes the NeXT and VOC formats; pointers to more info about AIFF, AIFC, 8SVX and WAVE (which are too complex to describe here) are also in appendices. DEC systems (e.g. DECstation 5000) use a variant of the NeXT format that uses little-endian encoding and has a different magic number (0x0064732E in little-endian encoding). Standard file formats used in the CD-I world are IFF but on the disc they're in realtime files. An interesting "interchange format" for audio data is described in the proposed Internet Standard "MIME", which describes a family of transport encodings and structuring devices for electronic mail. This is an extensible format, and initially standardizes a type of audio data dubbed "audio/basic", which is 8-bit U-LAW data sampled at 8000 samples/sec. Finally, a format that doesn't really belong here are "MOD" files, usually with extension ".mod" or ".nst" (on PCs, that is -- on Amigas they have a *prefix* of "mod."). These files are short clips of sounds with sequencing information. This makes for fairly compact files but is limitted to making music with samples of a piano and trumpet, etc. Headerless file formats ----------------------- extension origin parameters or name ..snd, .fssd Mac, PC variable rate, 1 channel, 8 bits unsigned ..ul US telephony 8 k, 1 channel, 8 bit "U-LAW" encoding ..snd? Amiga variable rate, 1 channel, 8 bits signed It is usually easy to distinguish 8-bit signed formats from unsigned by looking at the beginning of the data with 'od -b " option. Remember that the most common file type is unsigned bytes, which can be indicated with "-t ub". You'll have to guess the proper sampling rate, but often it's 11k or 22k. - In particular, with SOX version 4 (or earlier), you have to specify "-t 8svx" for files with an .iff extension. - When converting linear samples to U-LAW using the .au type for the output file, you must specify "-U" for the output file, otherwise you will end up with a file containing a NeXT/Sun header but linear samples -- only the NeXT will play such files correctly. Also, you must explicitly specify an output sampling rate with "-r 8000". (This may seem fixed for most cases in version 5, but it is still occasionally necessary, so I'm keeping this warning in.) Sun Sparc --------- On Sun Sparcs, starting at SunOS 4.1, a program "raw2audio" is provided by Sun (in /usr/demo/SOUND -- see below) which takes a raw U-LAW file and turns it into a ".au" file by prefixing it with an appropriate header. NeXT ---- On NeXTs, you can usually rename .au files to .snd and it'll work like a charm, but some .au files lack header info that the NeXT needs. This can be fixed by using sndconvert: sndconvert -c 1 -f 1 -s 8012.8210513 -o nextfile.snd sunfile.au SGI Indigo and Personal IRIS ---------------------------- SGI supports a program sfconvert, similar in spirit to SOX (in /usr/sbin in IRIX version 4.0). Also note that the sfplay program (see the next section) can do on-the-fly conversion for several popular formats. Amiga ----- Mike Cramer's SoundZAP can do no effects except rate change and it only does conversions to IFF, but it is generally much faster than SOX. (Ftp'able from the same directory as amisox above.) Tandy ----- The Tandy 1000 uses a (proprietary?) compressed format. There is a PD Mac to Tandy conversion program called CONVERT. Playing audio files on UNIX --------------------------- The commands needed to play an audio file depend on the file format and the available hardware and software. Most systems can only directly play sound in their native format; use a conversion program (see above) to play other formats. Sun Sparc --------- Raw U-LAW files can be played using "cat file >/dev/audio". A whole package for dealing with ".au" files is provided by Sun on an experimental basis, in /usr/demo/SOUND. You may have to compile the programs first. (If you can't find this directory, either you are not running SunOS 4.1 yet, or your system administrator hasn't installed it -- go ask him for it, not me!) The program "play" in this directory recognizes all files in Sun/NeXT format, but can play only those using U-LAW encoding at 8 k. You can also cat a ".au" file to /dev/audio, if it uses U-LAW; the header will sound like a short burst of noise but the rest of the data will sound OK (really, the only difference in this case between raw U-LAW and ".au" files is the header; the U-LAW data is exactly the same). Finally, OpenWindows 3.0 has a full-fledged audio tool. You can drop audio file icons into it, edit them, etc. NeXT ---- On NeXT machines, the standard "sndplay" program can play all NeXT format files (this include Sun ".au" files). It supports at least U-LAW at 8 k and 16 bits samples at 22 or 44.1 k. It attempts on-the-fly conversions for other formats. Sound files are also played if you double-click on them in the file browser. SGI Indigo and Personal IRIS ---------------------------- On SGI Indigo and the 4D/30 and /35 Personal IRIS workstations, the program "sfplay" (in /usr/sbin) plays AIFF files, if the sampling rate is one of 8000, 11025, 16000, 22050, 32000, 44100, or 48000 (the library interface to the hardware doesn't support other rates -- I don't know what the hardward is actually capable of). On the Personal IRIS, you need to have the audio board installed (check the output from hinv) and you must run IRIX 3.3.2 or 4.0 or higher. There is no simple /dev/audio interface on these SGI machines. (There was one on 4D/25 machines, reading and writing signed linear 8-bit samples at rates of 8, 16 and 32 k; unfortunately the board design caused a lot of noise from the CPU board to clutter the audio signals.) A program "playulaw" was posted as part of the "radio 1.0" release that I posted to alt.sources recently; it plays raw U-LAW files on the Indigo or Personal IRIS audio hardware. Sony NEWS --------- The Sony RISC-NEWS line (NWS-3250 laptop, NWS-37xx desktop, NWS-38xx desktop w/ IOP) also has builtin sound capabilities. You can also buy external boards for the older NEWS machines or to add extra channels to the new machines. In the default mode (8k/8-bit), Sun .au files are directly supported (you can 'cat' .au files to /dev/sb and have them play). Vaxstation 4000 --------------- ".au" files can be played by COPYING them to device "SOA0:". This device is set up by enabling the driver SODRIVER, as described below: DEC's sound stuff is like most other new toy. Hardware first, THEN the software. DEC will soon be releasing a layered product called DECsound, which will let you record, play, and (possibly) manipulate sound files. Third party product(s) have ALREADY hit the market. Enabling SODRIVER: (you can use the following command file) $!---------------- cut here ------------------------------- $! sound_setup.com enable SOUND driver $ run sys$system:sysgen connect soa0 /adapter=0 /csr=%x0e00 /vector=%o304 /driver=sodriver exit $ exit $!----------------- cut here ------------------------------------ The external audio port comes with a telephone-jack-like port. For starters, you can plug a telephone RECEIVER right into this port to hear your first sound files. After that, you can use the adapter (that came with the VaxStation), and plug in a small set of stereo speakers (the kind you'd plug into a WALKMAN, for example), for more volume. Others ------ Most other UNIX boxes don't have audio hardware and thus can't play audio data. Playing audio files on micros ----------------------------- Most micros have at least a speaker built in, so theoretically all you need is the right software. Unfortunately most systems don't come bundled with sound-playing software, so there are many public domain or shareware software packages, each with their own bugs and features. Most separate sound recording hardware also comes with playing software, most of which can play sound (in the file format used by that hardware) even on machines that don't have that hardware installed. Chris S. Craig announces the following software for PCs: ScopeTrax This is a complete PC sound player/editor package. Sounds can be played back at ANY rate between 1kHz to 65kHz through the PC speaker or the Sound Blaster. It supports several file formats including VOC, IFF/8SVX, raw signed and raw unsigned. A separate executable is provided to convert .au and mu-law to raw format. ScopeTrax requires EGA/VGA graphics for editing and displaying sounds on a REALTIME oscilloscope. The package also includes: * An expanded memory player which can play sounds larger than 640K in size. * Basic (rough) sound compression/uncompression utilities. * Complete documentation. The package is FREEWARE! It is available on SIMTEL in the PD1:[MSDOS.SOUND] directory. One of the appendices below contains a list of more programs to play sound on the PC. For sounds on Atari STs - programs are in the atari/sound/players directory on atari.archive.umich.edu (141.211.164.8). Malcolm Slaney from Apple writes: "We do have tools to play sound back on most of our Unix hosts. We wrote a program called TcpPlay that lets us read a sound file on a Unix host, open a TCP/IP connection to the Mac on my desk, and plays the file. We think of it as X windows for sound (at least a step in that direction.) This software is available for anonymous FTP from ftp.apple.com. Look for ~ftp/pub/TcpPlay/TcpPlay.sit.hqx. Finally, there are MANY tools for working with sound on the Macintosh. Three applications that come to mind immediately are SoundEdit (formerly by Farralon and now by MacroMind/Paracomp), Alchemy and Eric Keller's Signalyze. There are lots of other tools available for sound editing (including some of the QuickTime Movie tools.)" On a Tandy 1000, sounds can be played and recorded with DeskMate Sound (SOUND.PDM), or if they not stored in compressed format, they can also be played be a program called PLAYSND. No indication of whether PLAYSND is PD or not. It hasn't been updated since March of 89. The Sound Site Newsletter ------------------------- An electronic publication with lots of info about digitised sound and sound formats, albeit mostly on micros, is "The Sound Site Newsletter". So far, 8 issues have appeared, the last in January 1992. Issues can be ftp'ed from saffron.inset.com, directory directory pub/rogue/newsletters, or from ccb.ucsf.edu, Pub/Sound_list/Sound.Newsletters. Posting sounds -------------- The newsgroup alt.binaries.sounds.misc is dedicated to postings containing sound. (Discussions related to such postings belong in alt.binaries.sounds.d.) There is no set standard for posting sounds; uuencoded files in most popular formats are welcome, if split in parts under 50 kBytes. To accomodate automatic decoding software (such as the ":decode" command of the nn newsreader), please place a part indicator of the form (mm/nn) at the end of your subject meaning this is number mm of a total of nn part. It is recommended to post sounds in the format that was used for the original recording; conversions to other formats often lose information and would do people with identical hardware as the poster no favor. For instance, convering 8-bit linear sound to U-LAW loses the lower few bits of the data, and rate changing conversions almost always add noise. Converting from U-LAW to linear requires expansion to 16 bit samples if no information loss is allowed! U-LAW data is best posted with a NeXT/Sun header. If you have to post a file in a headerless format (usually 8-bit linear, like ".snd"), please add a description giving at least the sampling rate and whether the bytes are signed (zero at 0) or unsigned (zero at 0200). However, it is highly recommended to add a header that indicates the sampling rate and encoding scheme; if necessary you can use SOX to add a header of your choice to raw data. Compression of sound files usually isn't worth it; the standard "compress" algorithm doesn't save much when applied to sound data (typically at most 10-20 percent), and compression algorithms specifically designed for sound (e.g. NeXT's) are usually proprietary. (See also the section "Compression schemes" earlier.) Appendices ========== Here are some more detailed pieces of info that I received by e-mail. They are reproduced here virtually without much editing. ------------------------------------------------------------------------ FTP access for non-internet sites --------------------------------- From the sci.space FAQ: Sites not connected to the Internet cannot use FTP directly, but there are a few automated FTP servers which operate via email. Send mail containing only the word HELP to ftpmail@decwrl.dec.com or bitftp@pucc.princeton.edu, and the servers will send you instructions on how to make requests Also: FAQ lists are available by anonymous FTP from pit-manager.mit.edu (18.72.1.58) and by email from mail-server@pit-manager.mit.edu (send a message containing "help" for instructions about the mail server). ------------------------------------------------------------------------ AIFF Format (Audio IFF) and AIFC -------------------------------- This format was developed by Apple for storing high-quality sampled sound and musical instrument info; it is also used by SGI and several professional audio packages (sorry, I know no names). An extension, called AIFC or AIFF-C, supports compression (see the last item below). I've made a BinHex'ed MacWrite version of the AIFF spec (no idea if it's the same text as mentioned below) available by anonymous ftp from ftp.cwi.nl [192.16.184.180]; the file is /pub/AudioIFF1.2.hqx. But you may be better off with the AIFF-C specs, see below. Mike Brindley (brindley@ece.orst.edu) writes: "The complete AIFF spec by Steve Milne, Matt Deatherage (Apple) is available in 'AMIGA ROM Kernal Reference Manual: Devices (3rd Edition)' 1991 by Commodore-Amiga, Inc.; Addison-Wesley Publishing Co.; ISBN 0-201-56775-X, starting on page 435 (this edition has a charcoal grey cover). It is available in most bookstores, and soon in many good librairies." Finally, Mark Callow writes (in comp.sys.sgi): "I have placed a PostScript version of the AIFF-C specification on sgi.sgi.com for public ftp. It is in the file sgi/aiff-c.9.26.91.ps. sgi.sgi.com's internet host number is (I think) 192.48.153.1." ------------------------------------------------------------------------ The NeXT/Sun audio file format ------------------------------ Here's the complete story on the file format, from the NeXT documentation. (Note that the "magic" number is ((int)0x2e736e64), which equals ".snd".) Also, at the end, I've added a litte document that someone posted to the net a couple of years ago, that describes the format in a bit-by-bit fashion rather than from C. I received this from Doug Keislar, NeXT Computer. This is also the Sun format, except that Sun doesn't recognize as many format codes. I added the numeric codes to the table of formats and sorted it. SNDSoundStruct: How a NeXT Computer Represents Sound The NeXT sound software defines the SNDSoundStruct structure to represent sound. This structure defines the soundfile and Mach-O sound segment formats and the sound pasteboard type. It's also used to describe sounds in Interface Builder. In addition, each instance of the Sound Kit's Sound class encapsulates a SNDSoundStruct and provides methods to access and modify its attributes. Basic sound operations, such as playing, recording, and cut-and-paste editing, are most easily performed by a Sound object. In many cases, the Sound Kit obviates the need for in-depth understanding of the SNDSoundStruct architecture. For example, if you simply want to incorporate sound effects into an application, or to provide a simple graphic sound editor (such as the one in the Mail application), you needn't be aware of the details of the SNDSoundStruct. However, if you want to closely examine or manipulate sound data you should be familiar with this structure. The SNDSoundStruct contains a header, information that describes the attributes of a sound, followed by the data (usually samples) that represents the sound. The structure is defined (in sound/soundstruct.h) as: typedef struct { int magic; /* magic number SND_MAGIC */ int dataLocation; /* offset or pointer to the data */ int dataSize; /* number of bytes of data */ int dataFormat; /* the data format code */ int samplingRate; /* the sampling rate */ int channelCount; /* the number of channels */ char info[4]; /* optional text information */ } SNDSoundStruct; SNDSoundStruct Fields magic magic is a magic number that's used to identify the structure as a SNDSoundStruct. Keep in mind that the structure also defines the soundfile and Mach-O sound segment formats, so the magic number is also used to identify these entities as containing a sound. dataLocation It was mentioned above that the SNDSoundStruct contains a header followed by sound data. In reality, the structure only contains the header; the data itself is external to, although usually contiguous with, the structure. (Nonetheless, it's often useful to speak of the SNDSoundStruct as the header and the data.) dataLocation is used to point to the data. Usually, this value is an offset (in bytes) from the beginning of the SNDSoundStruct to the first byte of sound data. The data, in this case, immediately follows the structure, so dataLocation can also be thought of as the size of the structure's header. The other use of dataLocation, as an address that locates data that isn't contiguous with the structure, is described in "Format Codes," below. dataSize, dataFormat, samplingRate, and channelCount These fields describe the sound data. dataSize is its size in bytes (not including the size of the SNDSoundStruct). dataFormat is a code that identifies the type of sound. For sampled sounds, this is the quantization format. However, the data can also be instructions for synthesizing a sound on the DSP. The codes are listed and explained in "Format Codes," below. samplingRate is the sampling rate (if the data is samples). Three sampling rates, represented as integer constants, are supported by the hardware: Constant Sampling Rate (samples/sec) SND_RATE_CODEC 8012.821 (CODEC input) SND_RATE_LOW 22050.0 (low sampling rate output) SND_RATE_HIGH 44100.0 (high sampling rate output) channelCount is the number of channels of sampled sound. info info is a NULL-terminated string that you can supply to provide a textual description of the sound. The size of the info field is set when the structure is created and thereafter can't be enlarged. It's at least four bytes long (even if it's unused). Format Codes A sound's format is represented as a positive 32-bit integer. NeXT reserves the integers 0 through 255; you can define your own format and represent it with an integer greater than 255. Most of the formats defined by NeXT describe the amplitude quantization of sampled sound data: Value Code Format 0 SND_FORMAT_UNSPECIFIED unspecified format 1 SND_FORMAT_MULAW_8 8-bit mu-law samples 2 SND_FORMAT_LINEAR_8 8-bit linear samples 3 SND_FORMAT_LINEAR_16 16-bit linear samples 4 SND_FORMAT_LINEAR_24 24-bit linear samples 5 SND_FORMAT_LINEAR_32 32-bit linear samples 6 SND_FORMAT_FLOAT floating-point samples 7 SND_FORMAT_DOUBLE double-precision float samples 8 SND_FORMAT_INDIRECT fragmented sampled data 9 SND_FORMAT_NESTED ? 10 SND_FORMAT_DSP_CORE DSP program 11 SND_FORMAT_DSP_DATA_8 8-bit fixed-point samples 12 SND_FORMAT_DSP_DATA_16 16-bit fixed-point samples 13 SND_FORMAT_DSP_DATA_24 24-bit fixed-point samples 14 SND_FORMAT_DSP_DATA_32 32-bit fixed-point samples 15 ? 16 SND_FORMAT_DISPLAY non-audio display data 17 SND_FORMAT_MULAW_SQUELCH ? 18 SND_FORMAT_EMPHASIZED 16-bit linear with emphasis 19 SND_FORMAT_COMPRESSED 16-bit linear with compression 20 SND_FORMAT_COMPRESSED_EMPHASIZED A combination of the two above 21 SND_FORMAT_DSP_COMMANDS Music Kit DSP commands 22 SND_FORMAT_DSP_COMMANDS_SAMPLES ? Most formats identify different sizes and types of sampled data. Some deserve special note: -- SND_FORMAT_DSP_CORE format contains data that represents a loadable DSP core program. Sounds in this format are required by the SNDBootDSP() and SNDRunDSP() functions. You create a SND_FORMAT_DSP_CORE sound by reading a DSP load file (extension ".lod") with the SNDReadDSPfile() function. -- SND_FORMAT_DSP_COMMANDS is used to distinguish sounds that contain DSP commands created by the Music Kit. Sounds in this format can only be created through the Music Kit's Orchestra class, but can be played back through the SNDStartPlaying() function. -- SND_FORMAT_DISPLAY format is used by the Sound Kit's SoundView class. Such sounds can't be played. -- SND_FORMAT_INDIRECT indicates data that has become fragmented, as described in a separate section, below. -- SND_FORMAT_UNSPECIFIED is used for unrecognized formats. Fragmented Sound Data Sound data is usually stored in a contiguous block of memory. However, when sampled sound data is edited (such that a portion of the sound is deleted or a portion inserted), the data may become discontiguous, or fragmented. Each fragment of data is given its own SNDSoundStruct header; thus, each fragment becomes a separate SNDSoundStruct structure. The addresses of these new structures are collected into a contiguous, NULL-terminated block; the dataLocation field of the original SNDSoundStruct is set to the address of this block, while the original format, sampling rate, and channel count are copied into the new SNDSoundStructs. Fragmentation serves one purpose: It avoids the high cost of moving data when the sound is edited. Playback of a fragmented sound is transparent-you never need to know whether the sound is fragmented before playing it. However, playback of a heavily fragmented sound is less efficient than that of a contiguous sound. The SNDCompactSamples() C function can be used to compact fragmented sound data. Sampled sound data is naturally unfragmented. A sound that's freshly recorded or retrieved from a soundfile, the Mach-O segment, or the pasteboard won't be fragmented. Keep in mind that only sampled data can become fragmented. _________________________ >From mentor.cc.purdue.edu!purdue!decwrl!ucbvax!ziploc!eps Wed Apr 4 23:56:23 EST 1990 Article 5779 of comp.sys.next: Path: mentor.cc.purdue.edu!purdue!decwrl!ucbvax!ziploc!eps >From: eps@toaster.SFSU.EDU (Eric P. Scott) Newsgroups: comp.sys.next Subject: Re: Format of NeXT sndfile headers? Message-ID: <445@toaster.SFSU.EDU> Date: 31 Mar 90 21:36:17 GMT References: <14978@phoenix.Princeton.EDU> Reply-To: eps@cs.SFSU.EDU (Eric P. Scott) Organization: San Francisco State University Lines: 42 In article <14978@phoenix.Princeton.EDU> bskendig@phoenix.Princeton.EDU (Brian Kendig) writes: >I'd like to take a program I have that converts Macintosh sound files >to NeXT sndfiles and polish it up a bit to go the other direction as >well. Two people have already submitted programs that do this (Christopher Lane and Robert Hood); check the various NeXT archive sites. > Could someone please give me the format of a NeXT sndfile >header? "big-endian" 0 1 2 3 +-------+-------+-------+-------+ 0 | 0x2e | 0x73 | 0x6e | 0x64 | "magic" number +-------+-------+-------+-------+ 4 | | data location +-------+-------+-------+-------+ 8 | | data size +-------+-------+-------+-------+ 12 | | data format (enum) +-------+-------+-------+-------+ 16 | | sampling rate (int) +-------+-------+-------+-------+ 20 | | channel count +-------+-------+-------+-------+ 24 | | | | | (optional) info string 28 = minimum value for data location data format values can be found in /usr/include/sound/soundstruct.h Most common combinations: sampling channel data rate count format voice file 8012 1 1 = 8-bit mu-law system beep 22050 2 3 = 16-bit linear CD-quality 44100 2 3 = 16-bit linear ------------------------------------------------------------------------ IFF/8SVX Format --------------- Newsgroups: alt.binaries.sounds.d,alt.sex.sounds Subject: Format of the IFF header (Amiga sounds) Message-ID: <2509@tardis.Tymnet.COM> From: jms@tardis.Tymnet.COM (Joe Smith) Date: 23 Oct 91 23:54:38 GMT Followup-To: alt.binaries.sounds.d Organization: BT North America (Tymnet) The first 12 bytes of an IFF file are used to distinguish between an Amiga picture (FORM-ILBM), an Amiga sound sample (FORM-8SVX), or other file conforming to the IFF specification. The middle 4 bytes is the count of bytes that follow the "FORM" and byte count longwords. (Numbers are stored in M68000 form, high order byte first.) ------------------------------------------ FutureSound audio file, 15000 samples at 10.000KHz, file is 15048 bytes long. 0000: 464F524D 00003AC0 38535658 56484452 FORM..:.8SVXVHDR F O R M 15040 8 S V X V H D R 0010: 00000014 00003A98 00000000 00000000 ......:......... 20 15000 0 0 0020: 27100100 00010000 424F4459 00003A98 '.......BODY..:. 10000 1 0 1.0 B O D Y 15000 0000000..03 = "FORM", identifies this as an IFF format file. FORM+00..03 (ULONG) = number of bytes that follow. (Unsigned long int.) FORM+03..07 = "8SVX", identifies this as an 8-bit sampled voice. ????+00..03 = "VHDR", Voice8Header, describes the parameters for the BODY. VHDR+00..03 (ULONG) = number of bytes to follow. VHDR+04..07 (ULONG) = samples in the high octave 1-shot part. VHDR+08..0B (ULONG) = samples in the high octave repeat part. VHDR+0C..0F (ULONG) = samples per cycle in high octave (if repeating), else 0. VHDR+10..11 (UWORD) = samples per second. (Unsigned 16-bit quantity.) VHDR+12 (UBYTE) = number of octaves of waveforms in sample. VHDR+13 (UBYTE) = data compression (0=none, 1=Fibonacci-delta encoding). VHDR+14..17 (FIXED) = volume. (The number 65536 means 1.0 or full volume.) ????+00..03 = "BODY", identifies the start of the audio data. BODY+00..03 (ULONG) = number of bytes to follow. BODY+04..NNNNN = Data, signed bytes, from -128 to +127. 0030: 04030201 02030303 04050605 05060605 0040: 06080806 07060505 04020202 01FF0000 0050: 00000000 FF00FFFF FFFEFDFD FDFEFFFF 0060: FDFDFF00 00FFFFFF 00000000 00FFFF00 0070: 00000000 00FF0000 00FFFEFF 00000000 0080: 00010000 000101FF FF0000FE FEFFFFFE 0090: FDFDFEFD FDFFFFFC FDFEFDFD FEFFFEFE 00A0: FFFEFEFE FEFEFEFF FFFFFEFF 00FFFF01 This small section of the audio sample shows the number ranging from -5 (0xFD) to +8 (0x08). Warning: Do not assume that the BODY starts 48 bytes into the file. In addition to "VHDR", chunks labeled "NAME", "AUTH", "ANNO", or "(c) " may be present, and may be in any order. You will have to check the byte count in each chunk to determine how many bytes to skip. ------------------------------------------------------------------------ Playing sound on a PC --------------------- From: Eric A Rasmussen Any turbo PC (8088 at 8 Mhz or greater)/286/386/486/etc. can produce a quality playback of single channel 8 bit sounds on the internal (1 bit, 1 channel) speaker by utilizing Pulse-Width-Modulation, which toggles the speaker faster than it can physically move to simulate positions between fully on and fully off. There are several PD programs of this nature that I know of: REMAC - Plays MAC format sound files. Files on the Macintosh, at least the sound files that I've ripped apart, seem to contain 3 parts. The first two are info like what the file icon looks like and other header type info. The third part contains the raw sample data, and it is this portion of the file which is saved to a seperate file, often named with the .snd extension by PC users. Personally, I like to name the files .s1, .s2, .s3, or .s4 to indicate the sampling rate of the file. (-s# is how to specify the playback rate in REMAC.) REMAC provides playback rates of 5550hz, 7333hz, 11 khz, & 22 khz. REMAC2 - Same as REMAC, but sounds better on higher speed machines. REPLAY - Basically same as REMAC, but for playback of Atari ST sounds. Apparently, the Atari has two sound formats, one of which sounds like garbage if played by REMAC or REPLAY in the incorrect mode. The other file format works fine with REMAC and so appears to be 'normal' unsigned 8-bit data. REPLAY provides playback rates of 11.5 khz, 12.5 khz, 14 khz, 16 khz, 18.5 khz, 22khz, & 27 khz. These three programs are all by the same author, Richard E. Zobell who does not have an internet mail address to my knowledge, but does have a GEnie email address of R.ZOBELL. Additionally, there are various stand-alone demos which use the internal speaker, of which there is one called mushroom which plays a 30 second advertising jingle for magic mushroom room deoderizers which is pretty humerous. I've used this player to playback samples that I ripped out of the commercial game program Mean Streets, which uses something they call RealSound (tm) to playback digital samples on the internal speaker. (Of course, I only do this on my own system, and since I own the game, I see no problems with it.) For owners of 8 Mhz 286's and above, the option to play 4 channel 8 bit sounds (with decent quality) on the internal speaker is also a reality. Quite a number of PD programs exist to do this, including, but not limited to: ModEdit, ModPlay, ScreamTracker, STM, Star Trekker, Tetra, and probably a few more. All these programs basically make use of various sound formats used by the Amiga line of computers. These include .stm files, .mod files [a.k.a. mod. files], and .nst files [really the same hing]. Also, these programs pretty much all have the option to playback the sound to add-on hardware such as the SoundBlaster card, the Covox series of devices, and also to direct the data to either one or two (for stereo) parallel ports, which you could attach your own D/A's to. (From what I have seen, the Covox is basically an small amplified speaker with a D/A which plugs into the parallel port. This sounds very similiar to the Disney Sound System (DSS) which people have been talking about recently.) ------------------------------------------------------------------------ The EA-IFF-85 documentation --------------------------- From: dgc3@midway.uchicago.edu As promised, here's an ftp location for the EA-IFF-85 documentation. It's the November 1988 release as revised by Commodore (the last public release), with specifications for IFF FORMs for graphics, sound, formatted text, and more. IFF FORMS now exist for other media, including structured drawing, and new documentation is now available only from Commodore. The documentation is at grind.isca.uiowa.edu [128.255.19.233], in the directory /amiga/f1/ff185. The complete file list is as follows: DOCUMENTS.zoo EXAMPLES.zoo EXECUTABLE.zoo INCLUDE.zoo LINKER_INFO.zoo OBJECT.zoo SOURCE.zoo TP_IFF_Specs.zoo All files except DOCUMENTS.zoo are Amiga-specific, but may be used as a basis for conversion to other platforms. Well, I take that tentatively back. I don't know what TP_IFF_Specs.zoo contains, so it might be non-Amiga-specific. ------------------------------------------------------------------------ US Federal Standard 1016 availability ------------------------------------- From: Joe Campbell N3JBC jpcampb@afterlife.ncsc.mil 74040.305@compuserve.com The U.S. DoD's Federal-Standard-1016 4800 bps code excited linear prediction voice coder version 3.2 (CELP 3.2) Fortran and C simulation source codes are now available for worldwide distribution at no charge (on DOS diskettes, but configured to compile on Sun SPARC stations) from: Bob Fenichel National Communications System Washington, D.C. 20305 1-703-692-2124 1-703-746-4960 (fax) In addition to the source codes, example input and processed speech files are included along with a technical information bulletin to assist in implementation of FS-1016 CELP. (An anonymous ftp site is being considered for future releases.) Copies of the FS-1016 document are available for $2.50 each from: GSA Rm 6654 7th & D St SW Washington, D.C. 20407 1-202-708-9205 The following articles describe the Federal-Standard-1016 4.8-kbps CELP coder (it's unnecessary to read more than one): Campbell, Joseph P. Jr., Thomas E. Tremain and Vanoy C. Welch, "The Federal Standard 1016 4800 bps CELP Voice Coder," Digital Signal Processing, Academic Press, 1991, Vol. 1, No. 3, p. 145-155. Campbell, Joseph P. Jr., Thomas E. Tremain and Vanoy C. Welch, "The DoD 4.8 kbps Standard (Proposed Federal Standard 1016)," in Advances in Speech Coding, ed. Atal, Cuperman and Gersho, Kluwer Academic Publishers, 1991, Chapter 12, p. 121-133. Campbell, Joseph P. Jr., Thomas E. Tremain and Vanoy C. Welch, "The Proposed Federal Standard 1016 4800 bps Voice Coder: CELP," Speech Technology Magazine, April/May 1990, p. 58-64. ------------------------------------------------------------------------ Creative Voice (VOC) file format -------------------------------- From: galt@dsd.es.com (byte numbers are hex!) HEADER (bytes 00-19) Series of DATA BLOCKS (bytes 1A+) [Must end w/ Terminator Block] - --------------------------------------------------------------- HEADER: ======= byte # Description ------ ------------------------------------------ 00-12 "Creative Voice File" 13 1A (eof to abort printing of file) 14-15 Offset of first datablock in .voc file (std 1A 00 in Intel Notation) 16-17 Version number (minor,major) (VOC-HDR puts 0A 01) 18-19 2's Comp of Ver. # + 1234h (VOC-HDR puts 29 11) - --------------------------------------------------------------- DATA BLOCK: =========== Data Block: TYPE(1-byte), SIZE(3-bytes), INFO(0+ bytes) NOTE: Terminator Block is an exception -- it has only the TYPE byte. TYPE Description Size (3-byte int) Info ---- ----------- ----------------- ----------------------- 00 Terminator (NONE) (NONE) 01 Sound data 2+length of data * 02 Sound continue length of data Voice Data 03 Silence 3 ** 04 Marker 2 Marker# (2 bytes) 05 ASCII length of string null terminated string 06 Repeat 2 Count# (2 bytes) 07 End repeat 0 (NONE) *Sound Info Format: **Silence Info Format: --------------------- ---------------------------- 00 Sample Rate 00-01 Length of silence - 1 01 Compression Type 02 Sample Rate 02+ Voice Data Marker# -- Driver keeps the most recent marker in a status byte Count# -- Number of repetitions + 1 Count# may be 1 to FFFE for 0 - FFFD repetitions or FFFF for endless repetitions Sample Rate -- SR byte = 256-(1000000/sample_rate) Length of silence -- in units of sampling cycle Compression Type -- of voice data 8-bits = 0 4-bits = 1 2.6-bits = 2 2-bits = 3 Multi DAC = 3+(# of channels) [interesting-- this isn't in the developer's manual] ------------------------------------------------------------------------ RIFF WAVE (.WAV) file format ---------------------------- RIFF is a format by Microsoft and IBM which is similar in spirit and functionality as EA-IFF-85, but not compatible (and it's in little-endian byte order, of course :-). WAVE is RIFF's equivalent of AIFF, and its inclusion in Microsoft Windows 3.1 has suddenly made it important to know about. Rob Ryan was kind enough to send me a description of the RIFF format. Unfortunately, it is too big to include here (27 k), but I've made it available for anonymous ftp as ftp.cwi.nl:/pub/RIFF-format. And here's a pointer to the official description from Matt Saettler, Microsoft Multimedia: "The complete definition of the WAVE file format as defined by IBM/Microsoft is available for anon. FTP from ftp.uu.net in the vendor/microsoft/multimedia directory." (Rob Ryan's version may actually be an extract from one of the files stored there.) ------------------------------------------------------------------------ .