This is Info file bison.info, produced by Makeinfo-1.54 from the input file /home/gd2/gnu/bison/bison.texinfo. This file documents the Bison parser generator. Copyright (C) 1988, 1989, 1990, 1991, 1992 Free Software Foundation, Inc. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided also that the sections entitled "GNU General Public License" and "Conditions for Using Bison" are included exactly as in the original, and provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that the sections entitled "GNU General Public License", "Conditions for Using Bison" and this permission notice may be included in translations approved by the Free Software Foundation instead of in the original English.  File: bison.info, Node: Mid-Rule Actions, Prev: Action Types, Up: Semantics Actions in Mid-Rule ------------------- Occasionally it is useful to put an action in the middle of a rule. These actions are written just like usual end-of-rule actions, but they are executed before the parser even recognizes the following components. A mid-rule action may refer to the components preceding it using `$N', but it may not refer to subsequent components because it is run before they are parsed. The mid-rule action itself counts as one of the components of the rule. This makes a difference when there is another action later in the same rule (and usually there is another at the end): you have to count the actions along with the symbols when working out which number N to use in `$N'. The mid-rule action can also have a semantic value. The action can set its value with an assignment to `$$', and actions later in the rule can refer to the value using `$N'. Since there is no symbol to name the action, there is no way to declare a data type for the value in advance, so you must use the `$<...>' construct to specify a data type each time you refer to this value. There is no way to set the value of the entire rule with a mid-rule action, because assignments to `$$' do not have that effect. The only way to set the value for the entire rule is with an ordinary action at the end of the rule. Here is an example from a hypothetical compiler, handling a `let' statement that looks like `let (VARIABLE) STATEMENT' and serves to create a variable named VARIABLE temporarily for the duration of STATEMENT. To parse this construct, we must put VARIABLE into the symbol table while STATEMENT is parsed, then remove it afterward. Here is how it is done: stmt: LET '(' var ')' { $$ = push_context (); declare_variable ($3); } stmt { $$ = $6; pop_context ($5); } As soon as `let (VARIABLE)' has been recognized, the first action is run. It saves a copy of the current semantic context (the list of accessible variables) as its semantic value, using alternative `context' in the data-type union. Then it calls `declare_variable' to add the new variable to that list. Once the first action is finished, the embedded statement `stmt' can be parsed. Note that the mid-rule action is component number 5, so the `stmt' is component number 6. After the embedded statement is parsed, its semantic value becomes the value of the entire `let'-statement. Then the semantic value from the earlier action is used to restore the prior list of variables. This removes the temporary `let'-variable from the list so that it won't appear to exist while the rest of the program is parsed. Taking action before a rule is completely recognized often leads to conflicts since the parser must commit to a parse in order to execute the action. For example, the following two rules, without mid-rule actions, can coexist in a working parser because the parser can shift the open-brace token and look at what follows before deciding whether there is a declaration or not: compound: '{' declarations statements '}' | '{' statements '}' ; But when we add a mid-rule action as follows, the rules become nonfunctional: compound: { prepare_for_local_variables (); } '{' declarations statements '}' | '{' statements '}' ; Now the parser is forced to decide whether to run the mid-rule action when it has read no farther than the open-brace. In other words, it must commit to using one rule or the other, without sufficient information to do it correctly. (The open-brace token is what is called the "look-ahead" token at this time, since the parser is still deciding what to do about it. *Note Look-Ahead Tokens: Look-Ahead.) You might think that you could correct the problem by putting identical actions into the two rules, like this: compound: { prepare_for_local_variables (); } '{' declarations statements '}' | { prepare_for_local_variables (); } '{' statements '}' ; But this does not help, because Bison does not realize that the two actions are identical. (Bison never tries to understand the C code in an action.) If the grammar is such that a declaration can be distinguished from a statement by the first token (which is true in C), then one solution which does work is to put the action after the open-brace, like this: compound: '{' { prepare_for_local_variables (); } declarations statements '}' | '{' statements '}' ; Now the first token of the following declaration or statement, which would in any case tell Bison which rule to use, can still do so. Another solution is to bury the action inside a nonterminal symbol which serves as a subroutine: subroutine: /* empty */ { prepare_for_local_variables (); } ; compound: subroutine '{' declarations statements '}' | subroutine '{' statements '}' ; Now Bison can execute the action in the rule for `subroutine' without deciding which rule for `compound' it will eventually use. Note that the action is now at the end of its rule. Any mid-rule action can be converted to an end-of-rule action in this way, and this is what Bison actually does to implement mid-rule actions.  File: bison.info, Node: Declarations, Next: Multiple Parsers, Prev: Semantics, Up: Grammar File Bison Declarations ================== The "Bison declarations" section of a Bison grammar defines the symbols used in formulating the grammar and the data types of semantic values. *Note Symbols::. All token type names (but not single-character literal tokens such as `'+'' and `'*'') must be declared. Nonterminal symbols must be declared if you need to specify which data type to use for the semantic value (*note More Than One Value Type: Multiple Types.). The first rule in the file also specifies the start symbol, by default. If you want some other symbol to be the start symbol, you must declare it explicitly (*note Languages and Context-Free Grammars: Language and Grammar.). * Menu: * Token Decl:: Declaring terminal symbols. * Precedence Decl:: Declaring terminals with precedence and associativity. * Union Decl:: Declaring the set of all semantic value types. * Type Decl:: Declaring the choice of type for a nonterminal symbol. * Expect Decl:: Suppressing warnings about shift/reduce conflicts. * Start Decl:: Specifying the start symbol. * Pure Decl:: Requesting a reentrant parser. * Decl Summary:: Table of all Bison declarations.  File: bison.info, Node: Token Decl, Next: Precedence Decl, Up: Declarations Token Type Names ---------------- The basic way to declare a token type name (terminal symbol) is as follows: %token NAME Bison will convert this into a `#define' directive in the parser, so that the function `yylex' (if it is in this file) can use the name NAME to stand for this token type's code. Alternatively, you can use `%left', `%right', or `%nonassoc' instead of `%token', if you wish to specify precedence. *Note Operator Precedence: Precedence Decl. You can explicitly specify the numeric code for a token type by appending an integer value in the field immediately following the token name: %token NUM 300 It is generally best, however, to let Bison choose the numeric codes for all token types. Bison will automatically select codes that don't conflict with each other or with ASCII characters. In the event that the stack type is a union, you must augment the `%token' or other token declaration to include the data type alternative delimited by angle-brackets (*note More Than One Value Type: Multiple Types.). For example: %union { /* define stack type */ double val; symrec *tptr; } %token NUM /* define token NUM and its type */  File: bison.info, Node: Precedence Decl, Next: Union Decl, Prev: Token Decl, Up: Declarations Operator Precedence ------------------- Use the `%left', `%right' or `%nonassoc' declaration to declare a token and specify its precedence and associativity, all at once. These are called "precedence declarations". *Note Operator Precedence: Precedence, for general information on operator precedence. The syntax of a precedence declaration is the same as that of `%token': either %left SYMBOLS... or %left SYMBOLS... And indeed any of these declarations serves the purposes of `%token'. But in addition, they specify the associativity and relative precedence for all the SYMBOLS: * The associativity of an operator OP determines how repeated uses of the operator nest: whether `X OP Y OP Z' is parsed by grouping X with Y first or by grouping Y with Z first. `%left' specifies left-associativity (grouping X with Y first) and `%right' specifies right-associativity (grouping Y with Z first). `%nonassoc' specifies no associativity, which means that `X OP Y OP Z' is considered a syntax error. * The precedence of an operator determines how it nests with other operators. All the tokens declared in a single precedence declaration have equal precedence and nest together according to their associativity. When two tokens declared in different precedence declarations associate, the one declared later has the higher precedence and is grouped first.  File: bison.info, Node: Union Decl, Next: Type Decl, Prev: Precedence Decl, Up: Declarations The Collection of Value Types ----------------------------- The `%union' declaration specifies the entire collection of possible data types for semantic values. The keyword `%union' is followed by a pair of braces containing the same thing that goes inside a `union' in C. For example: %union { double val; symrec *tptr; } This says that the two alternative types are `double' and `symrec *'. They are given names `val' and `tptr'; these names are used in the `%token' and `%type' declarations to pick one of the types for a terminal or nonterminal symbol (*note Nonterminal Symbols: Type Decl.). Note that, unlike making a `union' declaration in C, you do not write a semicolon after the closing brace.  File: bison.info, Node: Type Decl, Next: Expect Decl, Prev: Union Decl, Up: Declarations Nonterminal Symbols ------------------- When you use `%union' to specify multiple value types, you must declare the value type of each nonterminal symbol for which values are used. This is done with a `%type' declaration, like this: %type NONTERMINAL... Here NONTERMINAL is the name of a nonterminal symbol, and TYPE is the name given in the `%union' to the alternative that you want (*note The Collection of Value Types: Union Decl.). You can give any number of nonterminal symbols in the same `%type' declaration, if they have the same value type. Use spaces to separate the symbol names.  File: bison.info, Node: Expect Decl, Next: Start Decl, Prev: Type Decl, Up: Declarations Suppressing Conflict Warnings ----------------------------- Bison normally warns if there are any conflicts in the grammar (*note Shift/Reduce Conflicts: Shift/Reduce.), but most real grammars have harmless shift/reduce conflicts which are resolved in a predictable way and would be difficult to eliminate. It is desirable to suppress the warning about these conflicts unless the number of conflicts changes. You can do this with the `%expect' declaration. The declaration looks like this: %expect N Here N is a decimal integer. The declaration says there should be no warning if there are N shift/reduce conflicts and no reduce/reduce conflicts. The usual warning is given if there are either more or fewer conflicts, or if there are any reduce/reduce conflicts. In general, using `%expect' involves these steps: * Compile your grammar without `%expect'. Use the `-v' option to get a verbose list of where the conflicts occur. Bison will also print the number of conflicts. * Check each of the conflicts to make sure that Bison's default resolution is what you really want. If not, rewrite the grammar and go back to the beginning. * Add an `%expect' declaration, copying the number N from the number which Bison printed. Now Bison will stop annoying you about the conflicts you have checked, but it will warn you again if changes in the grammar result in additional conflicts.  File: bison.info, Node: Start Decl, Next: Pure Decl, Prev: Expect Decl, Up: Declarations The Start-Symbol ---------------- Bison assumes by default that the start symbol for the grammar is the first nonterminal specified in the grammar specification section. The programmer may override this restriction with the `%start' declaration as follows: %start SYMBOL  File: bison.info, Node: Pure Decl, Next: Decl Summary, Prev: Start Decl, Up: Declarations A Pure (Reentrant) Parser ------------------------- A "reentrant" program is one which does not alter in the course of execution; in other words, it consists entirely of "pure" (read-only) code. Reentrancy is important whenever asynchronous execution is possible; for example, a nonreentrant program may not be safe to call from a signal handler. In systems with multiple threads of control, a nonreentrant program must be called only within interlocks. The Bison parser is not normally a reentrant program, because it uses statically allocated variables for communication with `yylex'. These variables include `yylval' and `yylloc'. The Bison declaration `%pure_parser' says that you want the parser to be reentrant. It looks like this: %pure_parser The effect is that the two communication variables become local variables in `yyparse', and a different calling convention is used for the lexical analyzer function `yylex'. *Note Calling for Pure Parsers: Pure Calling, for the details of this. The variable `yynerrs' also becomes local in `yyparse' (*note The Error Reporting Function `yyerror': Error Reporting.). The convention for calling `yyparse' itself is unchanged.  File: bison.info, Node: Decl Summary, Prev: Pure Decl, Up: Declarations Bison Declaration Summary ------------------------- Here is a summary of all Bison declarations: `%union' Declare the collection of data types that semantic values may have (*note The Collection of Value Types: Union Decl.). `%token' Declare a terminal symbol (token type name) with no precedence or associativity specified (*note Token Type Names: Token Decl.). `%right' Declare a terminal symbol (token type name) that is right-associative (*note Operator Precedence: Precedence Decl.). `%left' Declare a terminal symbol (token type name) that is left-associative (*note Operator Precedence: Precedence Decl.). `%nonassoc' Declare a terminal symbol (token type name) that is nonassociative (using it in a way that would be associative is a syntax error) (*note Operator Precedence: Precedence Decl.). `%type' Declare the type of semantic values for a nonterminal symbol (*note Nonterminal Symbols: Type Decl.). `%start' Specify the grammar's start symbol (*note The Start-Symbol: Start Decl.). `%expect' Declare the expected number of shift-reduce conflicts (*note Suppressing Conflict Warnings: Expect Decl.). `%pure_parser' Request a pure (reentrant) parser program (*note A Pure (Reentrant) Parser: Pure Decl.).  File: bison.info, Node: Multiple Parsers, Prev: Declarations, Up: Grammar File Multiple Parsers in the Same Program ==================================== Most programs that use Bison parse only one language and therefore contain only one Bison parser. But what if you want to parse more than one language with the same program? Then you need to avoid a name conflict between different definitions of `yyparse', `yylval', and so on. The easy way to do this is to use the option `-p PREFIX' (*note Invoking Bison: Invocation.). This renames the interface functions and variables of the Bison parser to start with PREFIX instead of `yy'. You can use this to give each parser distinct names that do not conflict. The precise list of symbols renamed is `yyparse', `yylex', `yyerror', `yylval', `yychar' and `yydebug'. For example, if you use `-p c', the names become `cparse', `clex', and so on. *All the other variables and macros associated with Bison are not renamed.* These others are not global; there is no conflict if the same name is used in different parsers. For example, `YYSTYPE' is not renamed, but defining this in different ways in different parsers causes no trouble (*note Data Types of Semantic Values: Value Type.). The `-p' option works by adding macro definitions to the beginning of the parser source file, defining `yyparse' as `PREFIXparse', and so on. This effectively substitutes one name for the other in the entire parser file.  File: bison.info, Node: Interface, Next: Algorithm, Prev: Grammar File, Up: Top Parser C-Language Interface *************************** The Bison parser is actually a C function named `yyparse'. Here we describe the interface conventions of `yyparse' and the other functions that it needs to use. Keep in mind that the parser uses many C identifiers starting with `yy' and `YY' for internal purposes. If you use such an identifier (aside from those in this manual) in an action or in additional C code in the grammar file, you are likely to run into trouble. * Menu: * Parser Function:: How to call `yyparse' and what it returns. * Lexical:: You must supply a function `yylex' which reads tokens. * Error Reporting:: You must supply a function `yyerror'. * Action Features:: Special features for use in actions.  File: bison.info, Node: Parser Function, Next: Lexical, Up: Interface The Parser Function `yyparse' ============================= You call the function `yyparse' to cause parsing to occur. This function reads tokens, executes actions, and ultimately returns when it encounters end-of-input or an unrecoverable syntax error. You can also write an action which directs `yyparse' to return immediately without reading further. The value returned by `yyparse' is 0 if parsing was successful (return is due to end-of-input). The value is 1 if parsing failed (return is due to a syntax error). In an action, you can cause immediate return from `yyparse' by using these macros: `YYACCEPT' Return immediately with value 0 (to report success). `YYABORT' Return immediately with value 1 (to report failure).  File: bison.info, Node: Lexical, Next: Error Reporting, Prev: Parser Function, Up: Interface The Lexical Analyzer Function `yylex' ===================================== The "lexical analyzer" function, `yylex', recognizes tokens from the input stream and returns them to the parser. Bison does not create this function automatically; you must write it so that `yyparse' can call it. The function is sometimes referred to as a lexical scanner. In simple programs, `yylex' is often defined at the end of the Bison grammar file. If `yylex' is defined in a separate source file, you need to arrange for the token-type macro definitions to be available there. To do this, use the `-d' option when you run Bison, so that it will write these macro definitions into a separate header file `NAME.tab.h' which you can include in the other source files that need it. *Note Invoking Bison: Invocation. * Menu: * Calling Convention:: How `yyparse' calls `yylex'. * Token Values:: How `yylex' must return the semantic value of the token it has read. * Token Positions:: How `yylex' must return the text position (line number, etc.) of the token, if the actions want that. * Pure Calling:: How the calling convention differs in a pure parser (*note A Pure (Reentrant) Parser: Pure Decl.).  File: bison.info, Node: Calling Convention, Next: Token Values, Up: Lexical Calling Convention for `yylex' ------------------------------ The value that `yylex' returns must be the numeric code for the type of token it has just found, or 0 for end-of-input. When a token is referred to in the grammar rules by a name, that name in the parser file becomes a C macro whose definition is the proper numeric code for that token type. So `yylex' can use the name to indicate that type. *Note Symbols::. When a token is referred to in the grammar rules by a character literal, the numeric code for that character is also the code for the token type. So `yylex' can simply return that character code. The null character must not be used this way, because its code is zero and that is what signifies end-of-input. Here is an example showing these things: yylex () { ... if (c == EOF) /* Detect end of file. */ return 0; ... if (c == '+' || c == '-') return c; /* Assume token type for `+' is '+'. */ ... return INT; /* Return the type of the token. */ ... } This interface has been designed so that the output from the `lex' utility can be used without change as the definition of `yylex'.  File: bison.info, Node: Token Values, Next: Token Positions, Prev: Calling Convention, Up: Lexical Semantic Values of Tokens ------------------------- In an ordinary (nonreentrant) parser, the semantic value of the token must be stored into the global variable `yylval'. When you are using just one data type for semantic values, `yylval' has that type. Thus, if the type is `int' (the default), you might write this in `yylex': ... yylval = value; /* Put value onto Bison stack. */ return INT; /* Return the type of the token. */ ... When you are using multiple data types, `yylval''s type is a union made from the `%union' declaration (*note The Collection of Value Types: Union Decl.). So when you store a token's value, you must use the proper member of the union. If the `%union' declaration looks like this: %union { int intval; double val; symrec *tptr; } then the code in `yylex' might look like this: ... yylval.intval = value; /* Put value onto Bison stack. */ return INT; /* Return the type of the token. */ ...  File: bison.info, Node: Token Positions, Next: Pure Calling, Prev: Token Values, Up: Lexical Textual Positions of Tokens --------------------------- If you are using the `@N'-feature (*note Special Features for Use in Actions: Action Features.) in actions to keep track of the textual locations of tokens and groupings, then you must provide this information in `yylex'. The function `yyparse' expects to find the textual location of a token just parsed in the global variable `yylloc'. So `yylex' must store the proper data in that variable. The value of `yylloc' is a structure and you need only initialize the members that are going to be used by the actions. The four members are called `first_line', `first_column', `last_line' and `last_column'. Note that the use of this feature makes the parser noticeably slower. The data type of `yylloc' has the name `YYLTYPE'.  File: bison.info, Node: Pure Calling, Prev: Token Positions, Up: Lexical Calling for Pure Parsers ------------------------ When you use the Bison declaration `%pure_parser' to request a pure, reentrant parser, the global communication variables `yylval' and `yylloc' cannot be used. (*Note A Pure (Reentrant) Parser: Pure Decl.) In such parsers the two global variables are replaced by pointers passed as arguments to `yylex'. You must declare them as shown here, and pass the information back by storing it through those pointers. yylex (lvalp, llocp) YYSTYPE *lvalp; YYLTYPE *llocp; { ... *lvalp = value; /* Put value onto Bison stack. */ return INT; /* Return the type of the token. */ ... } If the grammar file does not use the `@' constructs to refer to textual positions, then the type `YYLTYPE' will not be defined. In this case, omit the second argument; `yylex' will be called with only one argument.  File: bison.info, Node: Error Reporting, Next: Action Features, Prev: Lexical, Up: Interface The Error Reporting Function `yyerror' ====================================== The Bison parser detects a "parse error" or "syntax error" whenever it reads a token which cannot satisfy any syntax rule. A action in the grammar can also explicitly proclaim an error, using the macro `YYERROR' (*note Special Features for Use in Actions: Action Features.). The Bison parser expects to report the error by calling an error reporting function named `yyerror', which you must supply. It is called by `yyparse' whenever a syntax error is found, and it receives one argument. For a parse error, the string is normally `"parse error"'. If you define the macro `YYERROR_VERBOSE' in the Bison declarations section (*note The Bison Declarations Section: Bison Declarations.), then Bison provides a more verbose and specific error message string instead of just plain `"parse error"'. It doesn't matter what definition you use for `YYERROR_VERBOSE', just whether you define it. The parser can detect one other kind of error: stack overflow. This happens when the input contains constructions that are very deeply nested. It isn't likely you will encounter this, since the Bison parser extends its stack automatically up to a very large limit. But if overflow happens, `yyparse' calls `yyerror' in the usual fashion, except that the argument string is `"parser stack overflow"'. The following definition suffices in simple programs: yyerror (s) char *s; { fprintf (stderr, "%s\n", s); } After `yyerror' returns to `yyparse', the latter will attempt error recovery if you have written suitable error recovery grammar rules (*note Error Recovery::.). If recovery is impossible, `yyparse' will immediately return 1. The variable `yynerrs' contains the number of syntax errors encountered so far. Normally this variable is global; but if you request a pure parser (*note A Pure (Reentrant) Parser: Pure Decl.) then it is a local variable which only the actions can access.  File: bison.info, Node: Action Features, Prev: Error Reporting, Up: Interface Special Features for Use in Actions =================================== Here is a table of Bison constructs, variables and macros that are useful in actions. `$$' Acts like a variable that contains the semantic value for the grouping made by the current rule. *Note Actions::. `$N' Acts like a variable that contains the semantic value for the Nth component of the current rule. *Note Actions::. `$$' Like `$$' but specifies alternative TYPEALT in the union specified by the `%union' declaration. *Note Data Types of Values in Actions: Action Types. `$N' Like `$N' but specifies alternative TYPEALT in the union specified by the `%union' declaration. *Note Data Types of Values in Actions: Action Types. `YYABORT;' Return immediately from `yyparse', indicating failure. *Note The Parser Function `yyparse': Parser Function. `YYACCEPT;' Return immediately from `yyparse', indicating success. *Note The Parser Function `yyparse': Parser Function. `YYBACKUP (TOKEN, VALUE);' Unshift a token. This macro is allowed only for rules that reduce a single value, and only when there is no look-ahead token. It installs a look-ahead token with token type TOKEN and semantic value VALUE; then it discards the value that was going to be reduced by this rule. If the macro is used when it is not valid, such as when there is a look-ahead token already, then it reports a syntax error with a message `cannot back up' and performs ordinary error recovery. In either case, the rest of the action is not executed. `YYEMPTY' Value stored in `yychar' when there is no look-ahead token. `YYERROR;' Cause an immediate syntax error. This statement initiates error recovery just as if the parser itself had detected an error; however, it does not call `yyerror', and does not print any message. If you want to print an error message, call `yyerror' explicitly before the `YYERROR;' statement. *Note Error Recovery::. `YYRECOVERING' This macro stands for an expression that has the value 1 when the parser is recovering from a syntax error, and 0 the rest of the time. *Note Error Recovery::. `yychar' Variable containing the current look-ahead token. (In a pure parser, this is actually a local variable within `yyparse'.) When there is no look-ahead token, the value `YYEMPTY' is stored in the variable. *Note Look-Ahead Tokens: Look-Ahead. `yyclearin;' Discard the current look-ahead token. This is useful primarily in error rules. *Note Error Recovery::. `yyerrok;' Resume generating error messages immediately for subsequent syntax errors. This is useful primarily in error rules. *Note Error Recovery::. `@N' Acts like a structure variable containing information on the line numbers and column numbers of the Nth component of the current rule. The structure has four members, like this: struct { int first_line, last_line; int first_column, last_column; }; Thus, to get the starting line number of the third component, use `@3.first_line'. In order for the members of this structure to contain valid information, you must make `yylex' supply this information about each token. If you need only certain members, then `yylex' need only fill in those members. The use of this feature makes the parser noticeably slower.  File: bison.info, Node: Algorithm, Next: Error Recovery, Prev: Interface, Up: Top The Bison Parser Algorithm ************************** As Bison reads tokens, it pushes them onto a stack along with their semantic values. The stack is called the "parser stack". Pushing a token is traditionally called "shifting". For example, suppose the infix calculator has read `1 + 5 *', with a `3' to come. The stack will have four elements, one for each token that was shifted. But the stack does not always have an element for each token read. When the last N tokens and groupings shifted match the components of a grammar rule, they can be combined according to that rule. This is called "reduction". Those tokens and groupings are replaced on the stack by a single grouping whose symbol is the result (left hand side) of that rule. Running the rule's action is part of the process of reduction, because this is what computes the semantic value of the resulting grouping. For example, if the infix calculator's parser stack contains this: 1 + 5 * 3 and the next input token is a newline character, then the last three elements can be reduced to 15 via the rule: expr: expr '*' expr; Then the stack contains just these three elements: 1 + 15 At this point, another reduction can be made, resulting in the single value 16. Then the newline token can be shifted. The parser tries, by shifts and reductions, to reduce the entire input down to a single grouping whose symbol is the grammar's start-symbol (*note Languages and Context-Free Grammars: Language and Grammar.). This kind of parser is known in the literature as a bottom-up parser. * Menu: * Look-Ahead:: Parser looks one token ahead when deciding what to do. * Shift/Reduce:: Conflicts: when either shifting or reduction is valid. * Precedence:: Operator precedence works by resolving conflicts. * Contextual Precedence:: When an operator's precedence depends on context. * Parser States:: The parser is a finite-state-machine with stack. * Reduce/Reduce:: When two rules are applicable in the same situation. * Mystery Conflicts:: Reduce/reduce conflicts that look unjustified. * Stack Overflow:: What happens when stack gets full. How to avoid it.  File: bison.info, Node: Look-Ahead, Next: Shift/Reduce, Up: Algorithm Look-Ahead Tokens ================= The Bison parser does *not* always reduce immediately as soon as the last N tokens and groupings match a rule. This is because such a simple strategy is inadequate to handle most languages. Instead, when a reduction is possible, the parser sometimes "looks ahead" at the next token in order to decide what to do. When a token is read, it is not immediately shifted; first it becomes the "look-ahead token", which is not on the stack. Now the parser can perform one or more reductions of tokens and groupings on the stack, while the look-ahead token remains off to the side. When no more reductions should take place, the look-ahead token is shifted onto the stack. This does not mean that all possible reductions have been done; depending on the token type of the look-ahead token, some rules may choose to delay their application. Here is a simple case where look-ahead is needed. These three rules define expressions which contain binary addition operators and postfix unary factorial operators (`!'), and allow parentheses for grouping. expr: term '+' expr | term ; term: '(' expr ')' | term '!' | NUMBER ; Suppose that the tokens `1 + 2' have been read and shifted; what should be done? If the following token is `)', then the first three tokens must be reduced to form an `expr'. This is the only valid course, because shifting the `)' would produce a sequence of symbols `term ')'', and no rule allows this. If the following token is `!', then it must be shifted immediately so that `2 !' can be reduced to make a `term'. If instead the parser were to reduce before shifting, `1 + 2' would become an `expr'. It would then be impossible to shift the `!' because doing so would produce on the stack the sequence of symbols `expr '!''. No rule allows that sequence. The current look-ahead token is stored in the variable `yychar'. *Note Special Features for Use in Actions: Action Features.  File: bison.info, Node: Shift/Reduce, Next: Precedence, Prev: Look-Ahead, Up: Algorithm Shift/Reduce Conflicts ====================== Suppose we are parsing a language which has if-then and if-then-else statements, with a pair of rules like this: if_stmt: IF expr THEN stmt | IF expr THEN stmt ELSE stmt ; Here we assume that `IF', `THEN' and `ELSE' are terminal symbols for specific keyword tokens. When the `ELSE' token is read and becomes the look-ahead token, the contents of the stack (assuming the input is valid) are just right for reduction by the first rule. But it is also legitimate to shift the `ELSE', because that would lead to eventual reduction by the second rule. This situation, where either a shift or a reduction would be valid, is called a "shift/reduce conflict". Bison is designed to resolve these conflicts by choosing to shift, unless otherwise directed by operator precedence declarations. To see the reason for this, let's contrast it with the other alternative. Since the parser prefers to shift the `ELSE', the result is to attach the else-clause to the innermost if-statement, making these two inputs equivalent: if x then if y then win (); else lose; if x then do; if y then win (); else lose; end; But if the parser chose to reduce when possible rather than shift, the result would be to attach the else-clause to the outermost if-statement, making these two inputs equivalent: if x then if y then win (); else lose; if x then do; if y then win (); end; else lose; The conflict exists because the grammar as written is ambiguous: either parsing of the simple nested if-statement is legitimate. The established convention is that these ambiguities are resolved by attaching the else-clause to the innermost if-statement; this is what Bison accomplishes by choosing to shift rather than reduce. (It would ideally be cleaner to write an unambiguous grammar, but that is very hard to do in this case.) This particular ambiguity was first encountered in the specifications of Algol 60 and is called the "dangling `else'" ambiguity. To avoid warnings from Bison about predictable, legitimate shift/reduce conflicts, use the `%expect N' declaration. There will be no warning as long as the number of shift/reduce conflicts is exactly N. *Note Suppressing Conflict Warnings: Expect Decl. The definition of `if_stmt' above is solely to blame for the conflict, but the conflict does not actually appear without additional rules. Here is a complete Bison input file that actually manifests the conflict: %token IF THEN ELSE variable %% stmt: expr | if_stmt ; if_stmt: IF expr THEN stmt | IF expr THEN stmt ELSE stmt ; expr: variable ;  File: bison.info, Node: Precedence, Next: Contextual Precedence, Prev: Shift/Reduce, Up: Algorithm Operator Precedence =================== Another situation where shift/reduce conflicts appear is in arithmetic expressions. Here shifting is not always the preferred resolution; the Bison declarations for operator precedence allow you to specify when to shift and when to reduce. * Menu: * Why Precedence:: An example showing why precedence is needed. * Using Precedence:: How to specify precedence in Bison grammars. * Precedence Examples:: How these features are used in the previous example. * How Precedence:: How they work.  File: bison.info, Node: Why Precedence, Next: Using Precedence, Up: Precedence When Precedence is Needed ------------------------- Consider the following ambiguous grammar fragment (ambiguous because the input `1 - 2 * 3' can be parsed in two different ways): expr: expr '-' expr | expr '*' expr | expr '<' expr | '(' expr ')' ... ; Suppose the parser has seen the tokens `1', `-' and `2'; should it reduce them via the rule for the addition operator? It depends on the next token. Of course, if the next token is `)', we must reduce; shifting is invalid because no single rule can reduce the token sequence `- 2 )' or anything starting with that. But if the next token is `*' or `<', we have a choice: either shifting or reduction would allow the parse to complete, but with different results. To decide which one Bison should do, we must consider the results. If the next operator token OP is shifted, then it must be reduced first in order to permit another opportunity to reduce the sum. The result is (in effect) `1 - (2 OP 3)'. On the other hand, if the subtraction is reduced before shifting OP, the result is `(1 - 2) OP 3'. Clearly, then, the choice of shift or reduce should depend on the relative precedence of the operators `-' and OP: `*' should be shifted first, but not `<'. What about input such as `1 - 2 - 5'; should this be `(1 - 2) - 5' or should it be `1 - (2 - 5)'? For most operators we prefer the former, which is called "left association". The latter alternative, "right association", is desirable for assignment operators. The choice of left or right association is a matter of whether the parser chooses to shift or reduce when the stack contains `1 - 2' and the look-ahead token is `-': shifting makes right-associativity.  File: bison.info, Node: Using Precedence, Next: Precedence Examples, Prev: Why Precedence, Up: Precedence Specifying Operator Precedence ------------------------------ Bison allows you to specify these choices with the operator precedence declarations `%left' and `%right'. Each such declaration contains a list of tokens, which are operators whose precedence and associativity is being declared. The `%left' declaration makes all those operators left-associative and the `%right' declaration makes them right-associative. A third alternative is `%nonassoc', which declares that it is a syntax error to find the same operator twice "in a row". The relative precedence of different operators is controlled by the order in which they are declared. The first `%left' or `%right' declaration in the file declares the operators whose precedence is lowest, the next such declaration declares the operators whose precedence is a little higher, and so on.  File: bison.info, Node: Precedence Examples, Next: How Precedence, Prev: Using Precedence, Up: Precedence Precedence Examples ------------------- In our example, we would want the following declarations: %left '<' %left '-' %left '*' In a more complete example, which supports other operators as well, we would declare them in groups of equal precedence. For example, `'+'' is declared with `'-'': %left '<' '>' '=' NE LE GE %left '+' '-' %left '*' '/' (Here `NE' and so on stand for the operators for "not equal" and so on. We assume that these tokens are more than one character long and therefore are represented by names, not character literals.)  File: bison.info, Node: How Precedence, Prev: Precedence Examples, Up: Precedence How Precedence Works -------------------- The first effect of the precedence declarations is to assign precedence levels to the terminal symbols declared. The second effect is to assign precedence levels to certain rules: each rule gets its precedence from the last terminal symbol mentioned in the components. (You can also specify explicitly the precedence of a rule. *Note Context-Dependent Precedence: Contextual Precedence.) Finally, the resolution of conflicts works by comparing the precedence of the rule being considered with that of the look-ahead token. If the token's precedence is higher, the choice is to shift. If the rule's precedence is higher, the choice is to reduce. If they have equal precedence, the choice is made based on the associativity of that precedence level. The verbose output file made by `-v' (*note Invoking Bison: Invocation.) says how each conflict was resolved. Not all rules and not all tokens have precedence. If either the rule or the look-ahead token has no precedence, then the default is to shift.  File: bison.info, Node: Contextual Precedence, Next: Parser States, Prev: Precedence, Up: Algorithm Context-Dependent Precedence ============================ Often the precedence of an operator depends on the context. This sounds outlandish at first, but it is really very common. For example, a minus sign typically has a very high precedence as a unary operator, and a somewhat lower precedence (lower than multiplication) as a binary operator. The Bison precedence declarations, `%left', `%right' and `%nonassoc', can only be used once for a given token; so a token has only one precedence declared in this way. For context-dependent precedence, you need to use an additional mechanism: the `%prec' modifier for rules. The `%prec' modifier declares the precedence of a particular rule by specifying a terminal symbol whose precedence should be used for that rule. It's not necessary for that symbol to appear otherwise in the rule. The modifier's syntax is: %prec TERMINAL-SYMBOL and it is written after the components of the rule. Its effect is to assign the rule the precedence of TERMINAL-SYMBOL, overriding the precedence that would be deduced for it in the ordinary way. The altered rule precedence then affects how conflicts involving that rule are resolved (*note Operator Precedence: Precedence.). Here is how `%prec' solves the problem of unary minus. First, declare a precedence for a fictitious terminal symbol named `UMINUS'. There are no tokens of this type, but the symbol serves to stand for its precedence: ... %left '+' '-' %left '*' %left UMINUS Now the precedence of `UMINUS' can be used in specific rules: exp: ... | exp '-' exp ... | '-' exp %prec UMINUS  File: bison.info, Node: Parser States, Next: Reduce/Reduce, Prev: Contextual Precedence, Up: Algorithm Parser States ============= The function `yyparse' is implemented using a finite-state machine. The values pushed on the parser stack are not simply token type codes; they represent the entire sequence of terminal and nonterminal symbols at or near the top of the stack. The current state collects all the information about previous input which is relevant to deciding what to do next. Each time a look-ahead token is read, the current parser state together with the type of look-ahead token are looked up in a table. This table entry can say, "Shift the look-ahead token." In this case, it also specifies the new parser state, which is pushed onto the top of the parser stack. Or it can say, "Reduce using rule number N." This means that a certain number of tokens or groupings are taken off the top of the stack, and replaced by one grouping. In other words, that number of states are popped from the stack, and one new state is pushed. There is one other alternative: the table can say that the look-ahead token is erroneous in the current state. This causes error processing to begin (*note Error Recovery::.).  File: bison.info, Node: Reduce/Reduce, Next: Mystery Conflicts, Prev: Parser States, Up: Algorithm Reduce/Reduce Conflicts ======================= A reduce/reduce conflict occurs if there are two or more rules that apply to the same sequence of input. This usually indicates a serious error in the grammar. For example, here is an erroneous attempt to define a sequence of zero or more `word' groupings. sequence: /* empty */ { printf ("empty sequence\n"); } | maybeword | sequence word { printf ("added word %s\n", $2); } ; maybeword: /* empty */ { printf ("empty maybeword\n"); } | word { printf ("single word %s\n", $1); } ; The error is an ambiguity: there is more than one way to parse a single `word' into a `sequence'. It could be reduced to a `maybeword' and then into a `sequence' via the second rule. Alternatively, nothing-at-all could be reduced into a `sequence' via the first rule, and this could be combined with the `word' using the third rule for `sequence'. There is also more than one way to reduce nothing-at-all into a `sequence'. This can be done directly via the first rule, or indirectly via `maybeword' and then the second rule. You might think that this is a distinction without a difference, because it does not change whether any particular input is valid or not. But it does affect which actions are run. One parsing order runs the second rule's action; the other runs the first rule's action and the third rule's action. In this example, the output of the program changes. Bison resolves a reduce/reduce conflict by choosing to use the rule that appears first in the grammar, but it is very risky to rely on this. Every reduce/reduce conflict must be studied and usually eliminated. Here is the proper way to define `sequence': sequence: /* empty */ { printf ("empty sequence\n"); } | sequence word { printf ("added word %s\n", $2); } ; Here is another common error that yields a reduce/reduce conflict: sequence: /* empty */ | sequence words | sequence redirects ; words: /* empty */ | words word ; redirects:/* empty */ | redirects redirect ; The intention here is to define a sequence which can contain either `word' or `redirect' groupings. The individual definitions of `sequence', `words' and `redirects' are error-free, but the three together make a subtle ambiguity: even an empty input can be parsed in infinitely many ways! Consider: nothing-at-all could be a `words'. Or it could be two `words' in a row, or three, or any number. It could equally well be a `redirects', or two, or any number. Or it could be a `words' followed by three `redirects' and another `words'. And so on. Here are two ways to correct these rules. First, to make it a single level of sequence: sequence: /* empty */ | sequence word | sequence redirect ; Second, to prevent either a `words' or a `redirects' from being empty: sequence: /* empty */ | sequence words | sequence redirects ; words: word | words word ; redirects:redirect | redirects redirect ; .