Copyright (C) 1989, 1992, 1993 Aladdin Enterprises. All rights reserved. This file is part of Ghostscript. Ghostscript is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY. No author or distributor accepts responsibility to anyone for the consequences of using it or for whether it serves any particular purpose or works at all, unless he says so in writing. Refer to the Ghostscript General Public License for full details. Everyone is granted permission to copy, modify and redistribute Ghostscript, but only under the conditions described in the Ghostscript General Public License. A copy of this license is supposed to have been given to you along with Ghostscript so you can know your rights and responsibilities. It should be in a file named COPYING. Among other things, the copyright notice and this notice must be preserved on all copies. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - This file, NEWS, describes the changes in the most recent releases of Ghostscript. Changes in older releases are described in history.doc. For an overview of Ghostscript and a list of the documentation files, see README. Version 2.6.1 (5/28/93) ============= This is primarily a bug-fix release for 2.6, with a couple of minor additions. Documentation ------------- Adds proper `man' pages ansi2knr.1 and gs.1. Procedures ---------- Fixes bugs: - The Unix makefile produced an incorrect linker command if EXTRALIBS was not empty. - The Unix install commands didn't copy devices.doc, ps2epsi.doc, and xfonts.doc to the documentation directory. - echogs.c didn't include , which is needed for time_t on some systems. - malloc_.h used rather than on NeXTStep systems. Changes the configuration procedure to use a C program rather than complex shell scripts. Utilities --------- Fixes bugs: - The boilerplate produced by ps2image used the 'max' operator, which is not a standard PostScript operator. - The winmaps.ps utility had 'floring' instead of 'florin' in the OEMEncoding table. - quit.ps was omitted from the PC distribution. Changes the name of the dicttomark procedure to .dicttomark. Renames gs_2asc.ps as ps2ascii.ps, so it matches the names of the script files. Drivers ------- Fixes bugs: - The pbmraw driver was writing out RGG instead of RGB values. - The X11 driver used NULL in a place where it should have used None. - For multi-file output, the GIF driver didn't write a header at the beginning of each file. - The Epson driver didn't honor the -A4 compilation switch, didn't put (0,0) at the physical corner of the page, and was too liberal about using tabs instead of spaces. Replaces the color handling algorithms in the X Windows driver with new, much better ones. Makes the PC display drivers recognize the -A4 compilation switch, like the printer drivers. Adds new user-contributed drivers: - A driver for Epson printers that use the ESC/P 2 control language, such as the Stylus 800. - A driver for the Apple Dot Matrix Printer and Imagewriter. Adds a new get_xfont_device driver procedure. This is a backward-compatible change, since there is a sensible default. Platforms --------- Fixes bugs: - On VMS, gconfig.h didn't have #include "gsconfig.h" as its first line. - gconfig.c compiled incorrectly on the RS/6000 because the compiler evaluated a constant of the form (x< rather than install . Adds a GS_OPTIONS environment variable that acts like an implicit @-file at the beginning of the command line (i.e., may contain switches and initialization files). Renames sym__enc.ps as gs_sym_e.ps. Adds a user-contributed shell script for using Ghostscript with an H-P printer spooler. Adds level1.ps to the set of installed utility files. Extends the TEMP environment variable (the directory for scratch files) to work on Unix as well as MS-DOS. Changes the MS Windows makefile to generate gswin.exe rather than gs.exe, and the Watcom makefile to generate gs386.exe. Moves the "product" string from gs_init.ps to iinit.c. Adds a GS macro to the makefiles, to allow choosing the name of the executable. Utilities --------- Fixes bugs: * - font2c did the wrong thing (still) for fonts that didn't use StandardEncoding, ISOLatin1Encoding, or SymbolEncoding. * - impath.ps had a fatal bug (wrong operand order for charstack_write) that caused bdftops to fail. - gslp didn't wrap or truncate lines. - gslp didn't handle tabs in a second or subsequent column properly. - The definition of ashow in gs_2asc.ps incorrectly undid the increment following the last character. - The definition of awidthshow in gs_2asc.ps failed to pop two entries from the stack, and also tested the character against the wrong value. Adds a shell script (sysvlp.sh) that interfaces Ghostscript with the System V 3.2 lp interface. Adds ps2ascii and ps2epsi script/batch files. Adds a new utility, mergeini.ps, for concatenating all the Ghostscript initialization files into a single file, optionally removing comments and blank lines. Adds new switches to gslp: -q: suppress all printed output. --detect: check whether the file begins with %!, and if so, interpret it directly as a PostScript file. --first-page : replaces the former -P switch. --last-page : replaces the former -Q switch. --(heading|footing)-(left|center|right) : define headers/footers. # inserts the page number. --margin-(top|bottom|left|right) : define margins. --spacing : for double, triple, etc. spacing. Also makes gslp ignore all the enscript flags it doesn't implement. Adds an option to wrfont.ps to do encryption at read-in time. (This allows much better compression of the standard Ghostscript fonts.) Changes bdftops to use this option. Changes gslp to accept wild cards in file names. Replaces landscap.ps with a new one contributed by a user. Changes the compression scheme used in ps2image to a much more effective one. Writing images is much slower than with the previous scheme, but reading is not. Platforms --------- Fixes bugs: - SCFDTAB and SCFTAB were omitted from the VMS module lists. - Function prototypes were not being used with the Watcom compiler. - On MS-DOS platforms, if the value of the TEMP variable had a trailing : or \, Ghostscript appended a \ anyway. - Under Windows, changing the size or resolution of the image closed and reopened the window. - Ghostscript would not build correctly with the Watcom compiler if DOS4G=quiet was not set, because the DOS4GW copyright message was sent to stdout. * - Finally gets Ghostscript to run properly on the RS/6000, by adding a compiler bug workaround to arc_add and arc_either. * - Finally gets Ghostscript to compile properly on Sun SPARC systems, by adding a compiler bug workaround in scan_number. Changes the default MS-DOS configuration from 8086/8088 to 80286. Adds all the SuperVGA drivers to the BC++ and Watcom executables (except for the VESA driver in the Watcom executable). Adds a makefile (msc.mak) for the Microsoft C/C++ 7.0 platform. This is currently a MS-DOS, not a MS Windows, platform. Changes gp_enumerate_files_init so it takes a gs_memory_procs *, not separate proc_alloc_t and proc_free_t arguments; also, it must enumerate precisely the requested set of files, not a superset. THIS IS A NON-BACKWARD-COMPATIBLE-CHANGE. It affects all gp_*.c files. Adds the P*M drivers and bit.dev to the standard configuration on Unix platforms. Changes the Watcom makefile so it uses the WATCOM environment variable (by default) as the base directory for the Watcom executables. Adds the MS Windows COMMDLG.DLL and SHELL.DLL files to the set of files incorporated in GSEXE.ZIP, since the new MS Windows code uses them, and they aren't provided with Windows 3.0. Makes major revisions to the MS Windows platform and driver code, to support the gsview front end, and also to remove the dependence on the Borland EasyWin library. NOTE: Compiling the MS Windows code now requires Borland C++ 3.1 (not 3.0). Changes time_.h so that Ghostscript will compile and run on A/UX. Changes the MS-DOS implementation of file enumeration so it always treats \s in the file name as literal characters, not escapes, unless there are two \\s in a row. This does the most sensible thing given the DOS file naming conventions. Adds a %pipe% file device under Unix. Adds a makefile for Watcom C under MS Windows. This is very preliminary; in particular, NO display output is supported. Fonts ----- Fixes bugs: - fonts.mak referred to ncri and puti rather than ncrri and putri. - cyr and cyri had the wrong protection. - The Hershey fonts left the font on the stack when they were loaded. * - The FontName of an aliased font was the original FontName from the file, not the alias. * - Fontmap.BTS had incorrect entries for AvantGarde-Demi and AvantGarde-DemiOblique. - Ghostscript pushed userdict, rather than an empty writable dictionary, onto the stack when loading a font, leading to name clashes. Adds a new cfonts.mak with a full set of rules for compiling all the standard Ghostscript fonts (except the Hershey fonts) into C. Adds UniqueIDs to the Hershey fonts, and removes the UniqueIDs from the Hershey entries in the Fontmap. Adds a new Fontmap for VAX/VMS with DECWindows/Motif. Changes MakeHersheyFont so it takes the encoding as an additional parameter, and changes the Hershey-Symbol font to use SymbolEncoding. Drivers ------- Fixes bugs: - The !@*&^%#@$ PCL drivers *still* didn't do the right thing about vertical spacing: the *p+Y command works on all PCL 3, 4, and 5 printers *except* the LaserJet IIp. - The cdj driver used recursive macros (height, t_margin, b_margin) that not all compilers handled correctly. - The djtc driver used some assignments including =*, which some compilers dislike. - The S3 driver wouldn't compile correctly with the Watcom compiler. - The makefile entry for the S3 driver was wrong. - The SuperVGA drivers returned an error, rather than using the highest available resolution, if a too-high resolution was requested. - The GIF driver produced an incorrect header for images wider or taller than 32K pixels. - The GIF driver wasn't able to handle multi-page documents correctly. - The margins on the DeskJet were still not correct. - Some ANSI C compilers rejected a complex expression in gdevpccm.c. - Printer drivers didn't recover cleanly from problems in opening the scratch files. - The BJ-10e driver used the same name `out' for a label and a variable. - The SCO ODT compiler couldn't handle sizeof(ppdev->fname). - The Epson driver used the wrong value for ESC in the initialization string. Adds new drivers: - Drivers to produce MS Windows .BMP format output. - A new ATI Wonder display driver (800x600, 16 colors) and a 1024x768 mode for the existing driver. Adds new user-contributed drivers: - A driver for the Tektronix 4693d color printer. This carries a university copyright. - A driver for the SPARCprinter. - A driver for the Canon BJ200 printer. - A driver for the IBM ProPrinter. - A driver for the DEC LJ250 printer, which has a PaintJet-compatible mode. - A replacement driver for the Sony NWP533. - A driver that writes TIFF/F (Group 3 fax) files. This carries an external copyright. - A driver for the C.Itoh M8510 printer. - A driver for the Okidata MicroLine 182 9-pin dot-matrix printer. - A Hercules Graphics driver. - A driver for printers under MS Windows. - A driver for direct frame buffer addressing under SCO Unix and Xenix and AT&T SVR4. Changes the get_bits driver procedure so it always reads a single scan line, and optionally does not copy the data. THIS IS A NON-BACKWARD-COMPATIBLE CHANGE. However, this change does not affect any existing printer driver, since these all go through intermediate routines in gdevprn.c. Changes gdevprn.h, and the relevant printer drivers, so that -DA4 will change the default paper size for any printer driver. Allows the use of NULL or 0 for default procedures in the driver procedure vector. Adds an optional map_cmyk_color procedure to the driver procedure vector. Changes the Epson driver so that the minimum amount of white space required to use a tab is an easily changed parameter. Changes the BGI driver to use separate segments for the Borland device drivers, to reduce the risk of overflowing a segment. Adds an optimization option (normally enabled) to the PGM and PPM drivers such that they revert to PBM or (for PPM) PGM if the page can be represented that way. Adds a new (optional) driver procedure to get the procedure vector for external fonts. Adds an argument to gp_open_printer to indicate whether the file should be opened in binary or text mode. THIS IS A NON-BACKWARD-COMPATIBLE CHANGE. However, this change does not affect any existing printer driver, since these all go through intermediate routines in gdevprn.c. Changes the LN03/LA50/LA75 driver so it uses a text record mode to open the output file under VMS (by adding an argument to gp_open_printer to indicate this.) Allows (indeed, encourages) drivers to use far_data to declare the device structure, primarily to avoid overflowing the 64K data segment under MS Windows. Changes the file output drivers and many of the printer drivers to declare their device structures as far_data. Replaces the AT&T 3B1 driver with an updated version (from the same contributor). Changes the Epson BJ driver and the SPARCprinter driver so they align the (0,0) point of the page with the physical corner of the paper rather than with the origin of the printable area. Removes the EIZO MDB-10 driver, since it caused complications for the EGA and VGA drivers and is not a widely used device. Interpreter ----------- Fixes bugs: - The entry for the copydevice operator in the operator table was initialized incorrectly. - printobject and writeobject didn't handle nested arrays. - restore didn't properly close the current file (if appropriate), causing an invalidaccess error. - buildfont required the presence of a valid, 4-element FontBBox. (The Red Books say it's required, but Adobe interpreters don't require it; some DEC software generates a 3-element FontBBox.) - resourceforall had several bugs; it didn't do even approximately the right thing. There were quite a few other problems with the implementation of resources. - setfont, makefont, and scalefont would accept a font with no FID entry. * - Loading a .PFB font left the file open (until the next restore or quit). - The default (null) font didn't include a PaintType entry, which some PostScript files expected. * - The ASCIIHexDecode filter sometimes thought the underlying stream was at EOF even when there was (at most one buffer's worth of) data left. - iscan.c included before std.h, causing type name clashes on some systems. * - save and restore didn't handle the pointers in the graphics state correctly; for example, the current font wasn't restored properly. - Binary object sequences at the top interpreter level didn't get executed immediately. - On high-resolution devices, the default transfer function converted almost-white grays to very light grays rather than white. - The `string' operator was checking the string length against max_uint rather than max_ushort, which could cause invalid lengths to be accepted. * - deviceinfo caused a stackunderflow error. * - idiv could give incorrect results for quotients or remainders that didn't fit in 24 bits. * - The ASCII85Encode filter padded trailing bytes with 1's rather than 0's. * - The ASCII85Decode filter had a typo that produced incorrect results if there were exactly 2 trailing bytes. - findlibfile didn't push a copy of the file name if it was the name of a special (%) file. - setduplexmode was not defined in statusdict, causing /undefined errors from some poorly designed input files. * - The CCITTFaxDecode filter had several bugs in 2-D decoding. * - The ASCII85Decode filter didn't read ahead to detect EOD if it fell precisely on a buffer boundary. - If a file mentioned on the command line redefined `start', Ghostscript would run the new definition rather than the built-in one after processing all the files on the command line. - The SCO ODT compiler couldn't handle the conditionals in the ngetc (iscan.c) and sgetc* (stream.h) macros. - makefont and scalefont didn't cache the PostScript dictionaries for scaled fonts. - Changing the elements of the Encoding of a font dynamically didn't take effect if the character was already cached. - makefont and scalefont didn't add the (undocumented) OrigFont and ScaleMatrix entries to the new font. * - findfont insisted that the font name be a string or a name. - filenameforall could cause an incorrect transfer of control if no files matched the pattern. * - ISOLatin1Encoding had hyphen instead of minus at code 45. - restore didn't reset saved_cbot and saved_ctop correctly; as a result, some freed blocks could get abandoned rather than put on the free list. - Some numerical constants in zarith.c assumed that longs occupied 32 bits. Implements additional Level 2 features: - %device%file names (only the "os" device is provided). - <~ ~> for ASCII-85 strings. - Binary error messages. - BuildGlyph. - CCITTFaxDecode filter entries EndOfBlock, Rows, and (undocumented) FirstBitLowOrder. - {set/current}{color/colorspace/overprint/colorrendering/ blackgeneration/undercolorremoval}. (See below under library for limitations.) - Decode for the dictionary form of image. - File access modes a, r/w/a+. - Font entries CDevProc, Metrics2, and WMode. - Font operators cshow, findencoding, rootfont, and setcachedevice2. - glyphshow (emulated with PostScript code). - languagelevel. - realtime. - setbbox. - (Subset of) system and user parameters. - xshow, yshow, and xyshow. - XUIDs for fonts. Moves the installation of systemdict and the initial allocation of globaldict (if relevant) and userdict from gs_init.ps to iinit.c. Makes Level 2 features dynamically selectable through the .setlanguagelevel operator; disables all Level 2 features (specifically including automatic dictionary expansion) unless the level2 feature is included and active. Adds the .knownget operator for speeding up system procedures. Renames the type1addpath operator as .type1addpath; adds an optional left side bearing argument; changes it so it does not do the setcachedevice, fill, or stroke, but does do a moveto for the character width. Changes Type1BuildChar appropriately. (All this is needed to make WMode work.) Removes the .setmetrics operator, which is no longer needed. * Changes the meaning of the user_errors argument to gs_run_file and gs_run_string so that -1 means always return on an error, 0 means only return on an error not within a `stopped'. Adds all the necessary checks and operators for local/global VM, but doesn't actually implement local/global mode. Changes setcachedevice back so that it requires 4 numbers on the stack rather than a 4-element array. (It was changed to be the other way in release 2.0, but that was because I didn't realize that fonts had to have an executable FontBBox, and some of the Ghostscript fonts didn't.) Changes all the filter operators from .filterxxx to .filter_xxx, and removes the need to enumerate them in gs_init.ps. Adds .oserrno and .oserrorstring operators for getting the last OS error (in the current context). Changes gs_finit similarly to gp_exit. Adds gs_exit_with_code that takes both an exit status and a Ghostscript error code. Changes the name of name.h to iname.h. Adds support for the `interrupt' error (but doesn't provide any standard way of generating one, other than through the gp_check_interrupts polling function). Adds copyright to systemdict. Changes the spot halftone screen to an elliptical screen supplied by Berthold K. P. Horn. Adds a check that the first token in gs_init.ps is an integer. In conjunction with other code in gs_init.ps, this should catch all attempts to run Ghostscript with a gs_init.ps that doesn't match the executable. Changes all relevant occurrences of sizeof to size_of in order to work with the buggy SVR4.2 C compiler. Changes gp_exit so it is passed both the Ghostscript error code and the exit status code as arguments. This is backward-compatible for all but the pickiest compilers. Adds a call on gp_check_interrupts() after fwrite calls in the stream machinery. This prevents lengthy console output from locking out other programs. Changes a couple of occurrences of op_def_ptr in iinit.c to work around a `const' bug in Sun's SC1.0 compiler. Adds a special hack in the 'where' operator to work around a bug in Aldus Freehand 2.x. Changes all empty argument lists from () to (void), which is the ANSI C syntax. Adds a hack to ignore ^[ and ^D^[ tokens, to work around the prologue and epilogue emitted by the MS Windows LaserJet IV driver. Defines the processcolors operator, which should not be needed, but is required because of bugs in Lotus 1-2-3 and Adobe PhotoShop. Changes the allocator (ialloc) to fill all allocated and/or freed blocks with a marker if gs_alloc_debug is set, as gs_malloc and gs_free already do. Library ------- Fixes bugs: - 16-bit memory devices stored the bytes of each pixel in the wrong order. - copy_mono did the wrong thing when copying 1 source chunk to 2 destination chunks with polarity inverted. (This probably didn't affect any actual uses of Ghostscript.) * - The compile-time check for ints being 2 or 4 bytes used the #error directive, which most compilers don't recognize. - arc and arcn didn't do the right thing for degenerate (single-point) arcs, or for arcs drawn in the "wrong" direction that were multiples of 360 degrees. - charpath did the wrong thing with Type 3 fonts. - copyscanlines gave an error if the buffer was too large. - The copy_mono procedure (used for text and halftones) for 2- and 4-bit-per-pixel memory and printer devices incorrectly incremented the destination pointer after every pixel, instead of only after every byte. - The fill_rectangle procedure (used for graphics) for 2- and 4-bit-per-pixel memory and printer devices, if given any color other than all 0's or all 1's, multiplied the X coordinate and width by 2 or 4, thereby filling the wrong area. - The use of 'data' in both gs_type1_data and gs_font upset the VMS compiler. - The `Flex' feature wasn't implemented for Type 1 fonts, which caused serious errors in rendering some fonts that use it. (Unfortunately, some Adobe fonts violate the specification, so we had to implement Flex to always use a curve.) * - Stem width adjustment was too eager, producing very strange effects on small characters with tight curves (a curve point could get snapped to the other side of the open area). - The allocator didn't align structures adequately on machines where sizeof(long) or sizeof(char *) was 8 bytes. - The test for IEEE floating point gave an incorrect (negative) result on machines where sizeof(long) was 8 bytes. - genarch.c assumed that the result of subtracting two pointers was an int, leading to a garbage arch.h file on systems where this was false. * - The Type 1 font interpreter incorrectly reset the adjusted path position to be the same as the unadjusted path position whenever it returned control to the client (in particular, for callothersubr), leading to discontinuities and distortions in the character shapes. * - Accented characters in Type 1 fonts often misplaced the accent to the left. - gsmisc.c wouldn't compile on machines with 64-bit pointers, because _pad was 0, and ANSI compilers don't accept 0-length arrays. - pathforall got confused if the client procedures modified the path. - The command list file representation limited X and Y coordinates to 15 bits. * - stroke could produce spikes or other garbage for mitered joins as a result of stroke adjustment. - The params_size field of the null device was wrong, so scaling the null device produced unpredictable results. Changes monobit memory devices to always store data big-endian. This eliminates byte-swapping, at the cost of slightly slower rendering. Removes the memswab* routines, since they are no longer needed. Implements gs_cshow_[n_]init, which provides support for cshow, and gs_xyshow_[n_]init, which provides support for {x,y,xy}show. Adds an optional left side bearing argument to gs_type1_interpret. Changes gs_type1_interpret so it does not do a setcachedevice, fill, or stroke, but only appends the character outline to the path (including a moveto for the character width.) Removes gs_setmetrics, which is no longer needed. Implements gs_setcachedevice2, which provides support for setcachedevice2. Speeds up gsave/grestore by allocating, deallocating, and copying as much as possible of the graphics state in a single operation. Implements gs_{set/current}{color/colorspace/overprint/colorrendering/ blackgeneration/undercolorremoval}. Device, indexed (with table, not with procedure), CIE, and (substituted) separation colors are supported; some of the setup code for patterns is also present. Increases the size of temporary file names in gdevprn.h from 30 characters to 60. Changes the character cache to be allocated dynamically in chunks. Splits gxcache.c into gxccache.c (fast "hit" code) and gxccman.c (all other code). Changes all occurrences of sizeof to size_of in order to work with the buggy SVR4.2 C compiler. Adds a new concept of "external fonts", which allow a driver to substitute its own fonts for the ones obtained through the normal font machinery. Changes all empty argument lists from () to (void), which is the ANSI C syntax. Version 2.5.2 (9/20/92) ============= This is yet another bug fix release to (finally!) get the PCL drivers working again. Procedures ---------- Fixes bugs: - The comment in devs.mak for cdjcolor said it used 8 bits per pixel, rather than the correct 24. Adds gsbj/dj/lj/lp and gslp.ps to the installed files on Unix systems. Removes dps.dev and level2.dev from the standard configurations on all platforms, since the presence of the setcolor operator was causing the output of some common applications to fail. Utilities --------- Fixes bugs: - font2c produced invalid output for any font that didn't use StandardEncoding or ISOLatin1Encoding. Platforms --------- Fixes bugs: - gp_sysv.c required an extern long timezone. Drivers ------- Fixes bugs: - The PCL drivers were *still* doing the wrong thing about zeroing the seed row for Mode 3 compression. - Setting the resolution with -r didn't work under Windows. - The Windows driver got a stack overflow if it was ever asked to display a bit image wider than 32 pixels. - The Tseng driver didn't sense the model (ET3000 vs. ET4000) correctly. Adds the eps9high device to the standard MS-DOS makefiles. Interpreter ----------- Fixes bugs: - gs_run_string used gs_user_errors (a global) rather than user_errors (its argument) to control error handling. (This does not affect normal operation of Ghostscript, only use as a server.) - eexec popped the top element of the dictionary stack afterwards even if the encrypted code had pushed something onto it. This caused problems for some badly written PostScript code. - The printed form of real numbers didn't always include a decimal point, causing compatibility problems. Makes -s and -d work for device properties. Increases the cache limit on large-memory systems. Adds a check to ensure that the revision of gs_init.ps matches that of the interpreter. Adds the .knownget operator. Library ------- Fixes bugs: - The raster computation in clist_render_init, and the computation of state_size in clist_open, didn't widen an operand to long, leading to possibly incorrect operation for 24-bit-per-pixel printers on MS-DOS systems. - The flatness was set too large for Type 1 characters, leading to visible straight edges instead of curves at large sizes. - Type 1 fonts that contained out-of-range coordinates would produce garbled output. (This was not a problem with the standard Ghostscript fonts, or with Adobe Type Manager fonts.) - gschar0.c wouldn't compile, because it referred to a non-existing structure member penum->chr. (This had no effect on Ghostscript's operation.) - The curve flattener required line segments to be no more than 8 x the flatness in length, leading to an enormous number of segments. - pathforall would cause an addressing fault if the path consisted of only a moveto. Refactors some header files so that std.h is always included before any system header file that might include sys/types.h. Adds logic for removing top and bottom blank rows in cached characters. (This is the beginning of compression for the cache.) Changes the arguments of memswab2/4 from char * to byte *, for more accurate type conformance. Version 2.5.1 (9/11/92) ============= This is the usual bug fix re-release. Procedures ---------- Fixes bugs: - The makefile rules for compiled fonts had a circular dependency. - `make begin' didn't work properly on all platforms. Ensures that all batch files end with a newline. (The absence of the newline was confusing the GNU diff program.) Documents the fact that the -dASCIIOUT switch no longer exists. Utilities --------- Fixes bugs: - pstoppm didn't `bind' its internal procedures. - grestoreall would undo the output device selected by pstoppm. Changes the utilities for reading and writing Type 1 character outlines so they can work with stack representations as well as arrays. Removes the pfbtogs.ps, phonbook.ps, and showpbm.ps utilities from the distribution. Adds a gslj utility to parallel gslp and gsdj. Platforms --------- Adds the DeskJet 500C drivers (cdeskjet/cdj*) to the MS-DOS / Borland C++, MS-DOS / Watcom C/386, and MS-Windows configurations. Removes the PCX file driver from the MS Windows executable, because the static data segment exceeded 64K. Makes some changes in the Unix System V platform file (gp_sysv.c) and in time_.h and unixtail.mak to accommodate the 3B1. Fonts ----- Fixes bugs: - The Charter-Italic font was named bchi.pfa rather than bchri.pfa. - The Cyrillic fonts (cyr.gsf, cyri.gsf) were omitted from the fileset. - Ghostscript incorrectly assumed that all Type 1 fonts had a FontInfo dictionary. - .loadfont used false PFBDecode, so a few .PFB fonts would get errors because the first eexec byte would be whitespace. Changes font2c and its supporting code so that compiled fonts are location-independent. Drivers ------- Fixes bugs: - The margins for the H-P printers were still wrong. - The H-P drivers accidentally cleared the compression seed row when switching compression modes. - Some of the H-P drivers used the wrong control codes for skipping blank lines. Adds user-supported drivers for the AT&T 3B1 console device, and for the NEC P6+ printer. Updates the SunView driver with a new version supplied by a(nother) user. Changes the X Windows driver so the Ghostscript window doesn't get input focus. Changes the common code for the printer drivers so that if it can allocate a full bitmap but there isn't at least a minimum amount of memory left afterwards, it switches to banding. Changes the Windows driver so it handles devices with more than 8 bits per pixel. (We haven't been able to test this.) Adds a read-only PageCount device property (for printer devices only). Changes all Aladdin-supported drivers to clip drawing requests to the ((0,0), (width,height)) rectangle of device space. Interpreter ----------- Fixes bugs: - Closing a NullEncode filter always gave an ioerror. - If a single-character name occurred 1 character before the end of an input buffer, the character would be doubled. - The procedures in gs_statd.ps didn't use "bind". - Setting the page size didn't work properly with devices with rotated coordinate systems. - If an error occurred, and the error object wasn't the last element of its procedure, the interpreter would re-execute the error object after running the error handler. - Memory devices didn't get resized if HWSize was changed, leading to out-of-bounds memory accesses. Moves revision and revisiondate from gs_init.ps to iinit.c. Adds a -v switch that just prints these out. Arranges things so that if Ghostscript is reading from a pipe (`-' switch on the command line) and encounters an error, it exits with status 1 rather than 0. Changes the interpreter interface so the caller explicitly passes a pointer for storing an error object. Library ------- Fixes bugs: - The automatic adjustment of the scaling for variant paper sizes caused the image to get expanded when it should have been contracted, and vice versa. - The curve flattener insisted that each line segment be no more than 2 x the flatness in length, leading to an enormous number of segments even when not necessary for accuracy. - flattenpath and strokepath discarded a trailing moveto. - strokepath treated "0-width" lines as really having a width of zero, rather than one pixel. - Buffered devices weren't closed and reopened if the amount of buffer space was changed. - stroke used the line cap at the beginning of each subpath even if the subpath was closed. Removes the requirement that the clipping rectangle fall in the non-negative quadrant of device space. (This was causing problems for Ghostview, but removing it required adding the extra clipping step to the drawing routines in the drivers.) Version 2.5 (8/18/92) =========== This version adds Type 1 hinting, CCITTFax encoding and decoding, and Microsoft Windows support, as well as the usual minor improvements and bug fixes. Procedures ---------- Fixes bugs: - GSIMPATH, SLZWD, and SLZWE were omitted from the VMS makefiles, and GSIM2OUT was not removed. - landscap.ps messed up the current path. Adds new switches: -dSAFER disables file writing and directory modification. -dESTACKPRINT causes errors to print the execution stack with == instead of =. -sOutputFile= replaces -sOUTPUTFILE (which is still recognized) for setting the output file or pipe for the default (printer) device. -sPAPERSIZE= initializes the paper size. -dBufferSpace= sets the buffer size for the default (printer) device. For Unix systems, changes the directories in GS_LIB_DEFAULT from `pwd` to $(gsdatadir), i.e., normally $(datadir)/ghostscript, where datadir is normally /usr/local/lib. Adds a note in the header file to the effect that the X Windows driver expects to find header files in $(XINCLUDE)/X11, not in $(XINCLUDE). Changes -q so it defines QUIET as true instead of null (so it can be used in the middle of the command line as well as at the beginning). Renames the history.doc file as NEWS. Utilities --------- Platforms --------- Fixes bugs: - The stack size was not getting increased on the Watcom platform. Removes "b" from the scratch file opening modes in gp_unix.c and (conditionally) in gdevprn.c, to pacify the DECstation Ultrix system. Adds a makefile (bcwin.mak) and a platform file (gp_mswin.c) for Microsoft Windows. On MS-DOS platforms (including Windows), uses the TEMP environment variable to designate the directory for scratch files. Changes std.h so that the VMS C compiler uses function prototypes and 'const'. Changes the VMS cc makefile so it doesn't use ansi2knr. Fonts ----- Fixes bugs: - findfont left an extra entry on the stack if it couldn't find the default font. Renames bchi, ncri, and puti as bchri, ncrri, and putri, to conform with the naming scheme for other fonts. Adds $(CCFLAGS) to the command line used for compiling fonts. Converts the .pfa fonts (CharterBT, IBM Courier, and Utopia) to .gsf, by removing eexec encryption and also removing some mysterious unmapped characters from Courier. This makes these fonts work with DISKFONTS. Changes the implementation of compiled fonts so they are read-only and sharable (no external references). (They are, however, not position-independent.) Provides a way to use compiled fonts on platforms that limit the number of characters in an identifier. Adds public-domain Cyrillic and Cyrillic-Italic fonts. Adds a 'userdict begin' to .loadfont, because Type 3 fonts produced by Fontographer expect a writable dictionary on the top of the stack. Changes definefont for Type 1 fonts to insert UnderlinePosition and UnderlineThickness entries in FontInfo if they are absent, because many word processors incorrectly assume these entries are present. Drivers ------- Fixes bugs: - The documentation in use.doc said that the densities for 9-pin Epson printers were 60x60 to 240x60, rather than 60x72 to 240x72. - gdevprn.c smashed one byte beyond the end of the string given as the OutputFile device property. - The X11 driver used XVisualIDFromVisual, which is not defined in X11R3. - The SunView driver modified the input data, which was declared as const. - The LaserJet IIP and III drivers shifted the page 185 pixels to the left and 0.25" down, because the initialization string was incorrect. - The PCX driver wrote 16-bit values using the byte ordering of the platform, rather than always LSB first. - For vertical spacing, the LaserJet and DeskJet drivers used a command that spaces N/300", rather than N scan lines, but gave it a parameter in scan lines. - The VESA driver didn't allocate a full 256-byte buffer for reading the mode information from the BIOS, causing the stack to get smashed by newer VESA implementations. - The VESA driver didn't use the scan line length returned by the BIOS, causing garbage output for some cards and some resolutions. - The generic printer driver didn't free the bitmap when closing the device, if it fit entirely in memory. - The PaintJet driver allocated its data areas on the stack instead of with gs_malloc. - The generic printer driver didn't attempt to increase the buffer size if it was too small. - The band list driver didn't split large bitmaps properly, leading to garbled characters at high resolutions. - The GIF and PCX drivers used a color map that often turned gray colors into non-grays. Changes the default put_props procedure so that if the device is open, setting HWSize and/or HWResolution closes the device and reopens it. Adds a driver for Microsoft Windows 3.n. Updates the 'cdj' and 'dj500c' DeskJet 500C drivers with new versions. (This are user-contributed drivers.) Changes gdev_prn_put_props so OutputFile can be changed dynamically. Updates the DEC LN03 driver to also handle the LA50 and LA75. (This is a user-contributed driver with a FSF copyright.) Changes the LaserJet/DeskJet driver so that -DA4 in the makefile makes A4 paper the default. The driver now also sends an appropriate page size selection command to the printer if the printer supports it. Changes all the Aladdin-supported drivers to return appropriate error codes rather than -1. Adds a driver for the S3 86C911, a PC graphics accelerator used in the popular Diamond Stealth board. This is the first driver that uploads character bitmaps to a device; others will probably follow. Adds user-supplied code to the Epson driver so it will do triple passes on 9-pin printers for higher resolution. Adds user-supplied code for the PaintJet XL to the PaintJet driver. Interpreter ----------- Fixes bugs: - zdps1.c didn't include alloc.h. - On 32-bit systems, if maxlength of a dictionary was less than the actual allocated space, length could become larger than maxlength. - flushfile didn't actually flush data when reading. - The ASCII85Decode filter signalled EOF prematurely. - The scanner interpreted .3D.glorp as the number 0.3, rather than as a name. - Closing a file freed the stream structure, creating dangling references if there were other file objects pointing to the same stream. - eexec called handleerror if an error occurred, instead of letting the error propagate to an enclosing stopped. - gs.h made perror illegal, instead of defining it in terms of strerror. - One-character names weren't being allocated at initialization, so they could be left dangling after a restore. - Internal gsaves (i.e., the ones in show and setcachedevice) didn't also save istate, so setfont inside a BuildChar procedure might cause the font outside to get changed. - The allocator incorrectly freed objects in the current chunk that were older than the current save. - mark was just an object, rather than an operator, so 'bind' didn't bind it. (This is theoretically a problem for null, true, and false also, but even more unlikely to be a problem in practice.) - packed_get didn't cast packed integers to int, so negative integer elements of packed arrays came out wrong. - quit just did a gs_exit, instead of returning to the driver in an orderly way. - Because check_type_access checked for errors in the wrong order, sometimes type errors were reported as access errors. - eq didn't check for stack underflow. - Some of the stream_procs structures weren't properly declared const, leading to link errors on VMS. Implements currentcolor, currentcolorspace, setcolor, and setcolorspace (for DeviceGray, DeviceRGB, and DeviceCMYK only). Implements the dictionary form of image and imagemask. All the pairs in the Decode array must be the same; Interpolate is ignored. The only supported color spaces are DeviceGray, DeviceRGB, and DeviceCMYK. Implements files as allowable sources for the image operators. Removes the index field from the name structure, moving it to the 'size' field of name refs. Changes the unread/sungetc operation to require that the character be the same as the last one read from the file. Adds fflush calls to some debugging printout routines, because Unix sometimes buffers terminal output. Implements the CCITTFaxEncode and CCITTFaxDecode filters. Implements the general case of the SubFileDecode filter. Changes definefont to treat a UniqueID of 0 as equivalent to no UniqueID, because Fontographer output apparently often violates the specification in this way. Changes the default printer screen from 32.5 to 46 cells/inch. (The old value was appropriate for a hand-rotated cell with two spots in it.) Changes the utility routines to allow an integral real wherever an integer parameter is expected in a dictionary, because Fontographer produces fonts that violate the Adobe specification in this way. Adds a `dosio' feature that provides direct access to memory and to I/O ports under MS-DOS. (This feature is not included in the standard executables, of course.) Changes the default character cache limit to a 1/4" x 1/4" character at the default resolution, rather than basing it on the preallocated cache size. Removes support for t_color objects, which haven't actually been used for several releases. Implements setcmykcolor and currentcmykcolor as operators, so they will interact properly with setcolorspace and currentcolorspace. Changes the name of the file.h header file to files.h, to work around a bug in the VMS header library. Adds command line switches @file (to treat file as more command line, to get around the DOS 128-character command line limit) and -ffile (so one can specify file names that begin with - or @). Changes the PFBDecode filter so it takes an additional boolean that says whether or not to convert binary packets to hex. (Conversion to hex and back to binary accounted for a substantial amount of the time required to load .PFB fonts.) Splits off `copydevice' as a separate operator again. Library ------- Fixes bugs: - In the VMS environment, string_.h used its own prototypes for the str... and mem... functions instead of - gx_alloc_char_bits declared cdsize as long, but didn't shorten it when passing it to shorten_cached_char. - Stroking didn't suppress fattening of the lines. - kshow didn't update the cached CTM information in the show enumerator when returning from the callout, so further characters could get drawn in the wrong place. - When a memory device returned its initial matrix, it smashed the padding fields, which contained the interpreter's type information. - setcachedevice didn't set the initial matrix in the cache memory device. - image_set_rgb (in the image operators) didn't do a gx_color_from_rgb, so in principle one could sometimes get incorrect colors in an image. - The decision about whether or not to cache a character bitmap incorrectly compared the character size against cmax rather than cdata_size. - show didn't reset the in_cachedevice flag in the graphics state, so characters rendered by a recursive show were never cached. - clip and eoclip didn't release the intermediate flattened clip path, causing memory to be lost. - The tile_diff routine didn't handle the case of two identical tiles properly; this produced garbage in the band list file. - stringwidth didn't round the character origin to an integral pixel; this interacted badly with hinting, causing improperly hinted characters to wind up in the cache. - Bitmaps (including characters) were displaced, as well as being clipped, if they intersected the top of a clipping region. - In gxclist and gdevmem1, the raster computation (although not the result) could overflow an int on 16-bit machines. Implements decoding (sample mapping) for image and imagemask. Implements hinting for Type 1 fonts, based on (but not copying) the algorithms from the X11R5 tape. Changes curve rasterizing to use sampling, rather than recursive subdivision, for characters. This produces noticeably better output. Speed penalty for non-cached characters is less than 10% at display resolutions, up to 50% for 300 dpi printers. Implements gs_setcmykcolor and gs_currentcmykcolor. These are semi-fake, since they simply convert the color to and from RGB, but the former does set the current color space properly. Changes clipping regions so they use the any-part-of-pixel rule rather than the center-of-pixel rule. This helps avoid dropouts when using very small regions. Implements stroke adjustment. Version 2.4.2 (5/8/92) ============= This is another quick release. It finally fixes rotated halftone screens, and cleans up a few minor problems from 2.4.1. This release is being distributed only to beta testers and commercial licensees, since I don't want to be distracted from working on 2.5. Procedures ---------- Fixes bugs: - UTRACE still appeared in the VMS makefiles. - The support files (*.bat, *.doc, *.gsf, *.ps, Fontmap, COPYING, README) weren't included in the MS-DOS tar file. - The Unix install script didn't install landscap.ps. Replaces the type1imagepath operator with PostScript code (impath.ps, type1ops.ps) based on the new .imagepath operator. Renames LICENSE as COPYING. Utilities --------- Fixes bugs: - pcharstr.ps had an occurrence of Subrs rather than /Subrs, causing it to not print the Subrs, or to get an error if there were none. - font2c.ps didn't get the const declarations for string dictionaries quite right. - The missing newline at the end of gsbj.bat confused GNU diff. - ansi2knr would go into an infinite loop if a statement exceeded its internal buffer size. - Compiled fonts would get processed by ansi2knr, which messed them up. Platforms --------- Fixes bugs: - Ghostscript didn't supply equivalents for rename and gettimeofday, which some System V platforms lack. - The missing newline at the end of gp_dosfb.c confused GNU diff. Changes the Borland makefiles so that stack checking is only enabled if DEBUG or TDEBUG is set. Fonts ----- Changes the names of the Utopia fonts from utrg/utb/utbi/uti to putr/putb/putbi/puti, for consistency with the rest of the font names. Changes cour/courb/courbi/couri to ncrr/ncrb/ncrbi/ncri likewise. Replaces the Charter fonts with the CharterBT fonts donated by Bitstream to the X11R5 distribution. Adds font aliasing capability to Fontmap. Replaces Courier-[Bold]Oblique and ZapfChancery-MediumItalic by aliases. Changes the FontBBox of the Hershey fonts to be an executable, rather than a literal, array. Drivers ------- Fixes bugs: - The GIF driver omitted a `private' on the definition of gif_print_page. - The GIF driver wrote 16-bit values using the byte ordering of the platform, rather than always LSB first. - George Cameron's DeskJet 500C driver had an incorrect control sequence for skipping blank lines. Adds 'const' in many places, including the tile and bitmap arguments of the tile_rectangle, copy_mono, and copy_color driver routines. THIS IS A DRIVER INTERFACE CHANGE. (Printer drivers are not affected, since they don't implement these routines.) Adds a driver for the Trident TVGA. Interpreter ----------- Fixes bugs: - alloc_free sometimes incorrectly chose to put an unaligned block in an old segment on a freelist. - The default undercolor removal function returned its argument rather than returning 0. Adds NullEncode and SubFileDecode to the standard filters, since bdftops uses the latter. Adds RunLengthEncode and RunLengthDecode to the optional filters. Removes the type1imagepath operator. (It is still available as PostScript code, impath.ps.) Replaces it with a simpler outline tracing operator .imagepath. Adds 'const' in many places. Makes fileposition (but not setfileposition) legal for NullEncode filters. Changes the default transfer function for high-resolution devices from the identity function to the square root function. Moves array_get from zgeneric.c to iutil.c. Changes uses of fopen to add a "b" to the access mode, rather than relying on the _fmode global variable on MS-DOS platforms. Allows use of the -Z switch even when gsmain.c wasn't compiled with -DDEBUG, since other modules might have been. Reorganizes gs.c and gsmain.c so that the latter can be used in server environments. Replaces all uses of stdin/out/err with gs_stdin/out/err. Makes the number of permanent entries on the dictionary stack a parameter, to allow inserting globaldict in the future. Changes BlueShift in the Type 1 font Private dictionary to allow real numbers. (This differs from the Adobe specification, but at least one commercial font has a real number for BlueShift.) Library ------- Fixes bugs: - The doubling check in init_ht (gxht.c) still sometimes thought there was enough room to double the tile when there actually wasn't. - Rotated halftone screens didn't work. - gxarith.h used #ifdef vax, rather than #if !arch_floats_are_IEEE, to test whether IEEE floats were being used. - pathforall didn't report a trailing moveto. Replaces gs_type1imagepath with gs_imagepath. Allows sOUTPUTFILE=-, meaning output to stdout. Adds 'const' in many places. Replaces all uses of stdin/out/err with gs_stdin/out/err. Version 2.4.1 (4/21/92) ============= This is a quick release to fix minor problems discovered in 2.4, and to add a few improvements that didn't quite make it into 2.4. It also adds GIF and PCX file support. Procedures ---------- Fixes bugs: - Some makefile dependencies, and the ccgs script, caused trouble for parallel versions of `make'. - Compiling genarch with -O with gcc on the RS/6000 produced a buggy executable. Fixes some minor problems in make.doc. Adds DEVICE_DEVS2..5 to handle long device lists. Removes the need to set GS_RUN_EXE when using the Watcom compiler on MS-DOS systems. Gets rid of gs_ccfnt.ps, merging its function into gs_fonts.ps. Gets rid of gconfig.ps; this information is now compiled in gconfig.c. Utilities --------- Fixes bugs: - The palette for pstoppm in 8-bit mode didn't contain all 8 primary colors. - font2c used just values_ to mean &values_[0]; some compilers couldn't handle this. Makes font2c insert `const' in many appropriate places. Drivers ------- Fixes bugs: - The SunView driver had not been updated properly for 2.4 and was pretty thoroughly broken. - None of the printer drivers worked properly with the Watcom compiler, because stdprn was doing \n -> \r\n substitution. - If the generic printer driver couldn't allocate the requested size command list buffer, it gave up rather than trying to allocate a smaller buffer. - The SuperVGA drivers (except for the VESA driver) didn't work with the Watcom compiler, because a couple of places in the drivers weren't truncating the offset of "segmented" pointers properly. - Some of the H-P used *b#Y rather than *p+#Y for vertical positioning; this apparently is wrong, at least for the LJIIp. Removes the dependence of the X Windows driver on Xt, Xext, and Xmu. As a result, Ghostscript will not install a standard colormap itself, but it will use one if one is already installed. Adds a set of drivers for Portable Bitmap, Graymap, and Pixmap file formats. Adds drivers for monochrome, EGA/VGA-style, and SuperVGA-style PCX file formats. Adds drivers for monochrome and 256-color GIF file formats. Fonts ----- Adds ZapfChancery-MediumItalic as a copy of ZapfChancery-Oblique. Interpreter ----------- Fixes bugs: - A value with l_new set could 'escape' to save level 0 on a stack; if stored, it prevented the slot from being saved and restored properly. - 16#7fffffff + 1 gave the floating point equivalent of -2^31, not 2^31. - The PFBDecode filter computed the packet length incorrectly if the 0x8000-bit of the length was set. - 5-byte numbers in Type 1 CharStrings complained of a rangecheck if they exceeded 16 bits, rather than if they exceeded the integer part of a fixed. - (, ), and \ appearing in file name arguments in the command line did not work properly. Adds 'const' in many places. Changes the random number generator to be the same as the one used in Level 2 PostScript (as reported by Ed Taft on comp.lang.postscript). Exits with code 1 rather than code 0 on an unrecoverable error detected at the PostScript level. Makes dictionaries expand automatically when they fill up. Adds gp_exit to complement gp_init. Changes dictionaries to always allocate a power of 2 entries on 32-bit machines. Changes the name table to allocate indices scattered, so dictionary lookup doesn't have to do a multiply to scramble the index. Changes the handling of currentfile to do "shallow binding" so stack searching is almost never required. Library ------- Fixes bugs: - arc and arcn got a numeric exception if the radius was zero. - The undocumented 15 opcode in Type 1 fonts wasn't ignored. - PaintType 3 wasn't allowed. (It isn't clear what it should mean; we treat it as equivalent to 0.) - The VAX/VMS C compiler was generating incorrect code for the chi_bits and cmask macros in gdevmem, producing incorrect output. - If the result of the slow algorithm for intersecting clipping paths was a rectangle, the wrong thing happened (cbox didn't get set). - gx_path_is_rectangle didn't recognize open rectangles. - clist_change_tile didn't check properly whether the tile size had changed, so changing the screen could produce invalid band files. - The image operators did the wrong thing in the 1-for-1 case, interleaving N bytes of data with 7*N bytes of garbage. - stroke sometimes handled bevel and miter joins wrong in reflected coordinate systems. - init_ht checked incorrectly whether there was enough room to Y-replicate tiles, so sometimes it did it when it shouldn't have. - stroke sometimes thought lines were thin when they weren't. Adds 'const' in many places. Adds support for 2- and 4-bit-per-pixel memory devices. Version 2.4 (3/25/92) =========== This is a major release that adds SuperVGA support, support for Metrics, settable device properties, and incremental font loading. It also includes important performance improvements, based on rewrites of some key algorithms, and quite a few new Level 2 / Display PostScript facilities. Procedures ---------- Fixes bugs: - The rule for compiling gconfig.c didn't include the -I switches. - .bat files were being distributed with a \n line terminator rather than \r\n. - A CLOSE MODULE_LIST was needed after END_COMPILE: in the VMS command files. - Unix systems couldn't handle multiple drivers with overlapping sets of files. - -s defined as a null, rather than as an empty string. Adds gconfig.ps to the list of needed configuration files. Changes the way that the makefile handles nested .h files, so that it doesn't have to `touch' them. Adds the loadallfonts procedure to gs_fonts.ps. Changes the standard DOS configuration to include VGA, EGA, VESA, Epson, BubbleJet, and H-P printer drivers. Renames ghost.mak as gs.mak, and gdevs.mak as devs.mak. Adds a USE_ASM flag so that one can build a DOS version of Ghostscript without having an assembler. Splits off common code from the two MS-DOS makefiles into tccommon.mak. Replaces the COPYING and LICENSE files with a new LICENSE file containing version 2 of the GNU General Public License. Removes DEVICES and DEVICE_OBJS from the makefiles, since they are no longer needed. Adds a GS_DEVICE environment variable to supply a default device name if desired. Adds ansihead.mak and unix-ansi.mak, to parallel [g]cc-head.mak and unix-[g]cc.mak, for other ANSI C compilers. Changes the way that optional features are defined in the makefiles, so that they actually work. Adds support for the Watcom C/386 compiler. Allows # in the command line as equivalent to =, to compensate for brain-damaged MS-DOS shell. Adds -sOUTPUTFILE= to set the output file or pipe. Adds -dWRITESYSTEMDICT to leave systemdict writable. Utilities --------- Fixes bugs: - pcharstr.ps insisted on having Subrs be present in the font. - pcharstr.ps decoded negative numbers between -108 and -1131 incorrectly. - pfbtogs.ps didn't handle packets longer than 64K correctly. Changes the bdftops utility so that it makes entries for UnderlinePosition and UnderlineThickness in FontInfo, and so that it always records a FullName (the FontName if no other is provided). Changes the name of the pfbtops utility to pfbtogs, because groff already includes a program called pfbtops. Adds the gslp utility for doing "line printing" of text files, similar to enscript + lpr. Adds a new variable DITHERPPI that enables a different dither pattern, claimed to be better for printers. Adds the font2c utility for compiling Type 1 fonts into C, so they can be linked into an executable rather than loaded dynamically. Drivers ------- Fixes bugs: - gdev_prn_copy_scan_lines was erroneously masking the last byte of data even on color printers, as was paintjet_print_page. - The TruFax driver had a couple of compilation errors, since it hadn't been compiled in a while. - The BGI driver sometimes didn't consult BGIPATH when looking for .BGI files. - initclip did the wrong thing with memory devices. - The BGI driver didn't look in BGIDIR for .BGI files. - The Epson driver didn't set the right margin properly with ESC+Q. - The BJ-10e driver was badly broken. - gdev_prn_open/close_printer didn't reset the command list file, so it was taking quadratic time to print multi-page documents. Adds color to the SunView driver. Adds selectable resolution (75, 100, 150, or 300 DPI) to the DeskJet/LaserJet driver. Changes gssetdev so that drivers can specify special libraries to be loaded, as well as object files. Adds a driver for VESA-compliant SuperVGA displays. This driver handles all resolutions from 640 x 400 up to 1280 x 1024, in 256-color mode. The default is VGA resolution (640 x 480). Adds a driver for the ATI Wonder SuperVGA card, and for SuperVGA cards using the Tseng Labs ET3000 or ET4000 chip such as the STB VGA EM-16 and the Orchid ProDesigner II (256-color modes only). Adds a driver for Trident and Tseng Labs SuperVGA cards in 800 x 600, 16-color modes (for cards with only 256K of memory). Adds user-contributed drivers for the Ricoh 4081, DEC LN03, Canon LBP-8II, and H-P DeskJet 500C printers. Adds Tim Theisen's Ghostview changes to the X11 driver. MAKES NON-BACKWARD-COMPATIBLE CHANGES TO THE DRIVER PROCEDURE INTERFACE as follows: - Changes map_rgb_color and map_color_rgb to always work in a 16-bit color value space, rather than a space defined by the maximum number of distinct colors provided by the device. - Adds an argument to the output_page procedure to indicate whether the procedure is being called for copypage or showpage, and a num_copies argument. - Adds a gx_bitmap_id to the copy_ and tile_ procedures, so that drivers can cache bitmaps in the server or device if they want to. - Removes fill_trapezoid and tile_trapezoid. - Adds a new get_bits procedure for reading the bits back from the driver buffer (when possible), replacing copy_scan_lines. This procedure takes a new argument describing padding and byte swapping, and returns a different value from copy_scan_lines. - Adds get_props and put_props procedures for accessing arbitrary additional properties of devices. The interface is quite complex, but provides a great deal of flexibility. See drivers.doc for details. Changes gdev_mem_bytes_per_scan_line to gdev_prn_bytes_per_scan_line. Adds a user-contributed driver for DigiBoard, Inc.'s fax software. Fonts ----- Changes Type1BuildChar so it uses the information from the Metrics dictionary in the font, if Metrics is present. Changes findfont (.loadfont) so it recognizes .PFB fonts and can load them directly. Also changes .loadfont to disable packing temporarily, because some fonts rely on procedures being writable (!). Interpreter ----------- Fixes bugs: - The hypot function is not available on some Unix systems. - Ghostscript didn't flush and close files when exiting. - In statusdict, the /margins procedure used .leftmargin, but /setmargins used .lmargin. - An out-of-range putinterval would simply do nothing, rather than reporting an error. - If an attempt to allocate a block larger than the allocator's chunk size (20K) failed, the allocator would erroneously think it had succeeded. - The bind operator made the top-level procedure read-only, as well as interior procedures. - gs.c copied 1 extra character for the value of strings defined on the command line with -s...=, which could smash the first byte of the next object in memory. - copying a dictionary erroneously required the maxlength of the destination to be greater than or equal to the maxlength of the source, rather than the length of the source. - undef didn't correctly decide when to mark a deleted entry as deleted vs. free; as a result, some keys couldn't be looked up properly after an undef. - type1encrypt and type1decrypt didn't set the size of the result properly. - cvi and cvr didn't allow leading or trailing whitespace in strings. - cvs didn't cause an error if the destination string was too short. - Many operators didn't check correctly for stack underflow (off by 1). - `for' used reals, rather than integers, if the limit was a real, even if the initial value and increment were integers. - `restore' didn't properly invalidate copies of the save object being restored from; `save dup restore restore' would crash. - `restore' sometimes didn't undo stores into matrices that were stored into by operators. (The identity matrix always had l_new set.) - readline gave a rangecheck if the input line exactly filled the string. - `--' as the last switch on the command line caused a crash rather than an error message. - On MS-DOS systems, filenameforall didn't handle patterns with a drive or directory specifier properly. - stroke sometimes called gz_draw_line_fixed even if the line went outside the clipping box by 1 pixel. Changes the loop that binds procedure "operators" to entirely disable the handling of the typecheck error, rather than to use stopped. This cuts initialization time significantly, and also eliminates about 35K of wasted space (for saving the stacks). Changes the version "operator" so it returns 47.0. Adds "revision" to define the Ghostscript version # x 100. Adds gscurrentresolution and gssetresolution procedures for getting and setting the device resolution. Adds -r and -rx as command line options for setting device resolution. Adds a facility for incrementally loading the individual CharStrings of a Ghostscript font from the disk. This can save a lot of memory, at the expense of slower rendering. (It is intended primarily for MS-DOS systems.) Changes findlibfile to return the name of the file that was actually opened, as well as the file itself, when the operation succeeds. Changes the name of the main entry to the interpreter from interpret to gs_interpret, because of a conflict with a Data General library procedure. Adds the .setmetrics operator to set the metrics for the current character for Type 1 fonts. Adds more LaserWriter-specific entries to statusdict. Gives names to all the internal `operators', so they will print out reasonably when an error occurs. Extends the status operator to accept a string and return file information, as defined for Level 2 PostScript. Adds the filter operator and some specific filters: ASCII85Encode, ASCII85Decode, ASCIIHexEncode, ASCIIHexDecode, eexecDecode, NullEncode, PFBDecode, and the null case of SubFileDecode. Extends the scanner to recognize the Level 2 << and >> tokens. Adds a facility for extracting the text strings from a PostScript file and writing them out in a simple format (selected by -dASCIIOUT, implemented by gs_2asc.ps). Implements all of the remaining Display PostScript facilities that are also in Level 2 (i.e., everything in section A.1.3 of the PostScript Language Reference Manual, Second Edition, that is not also in section A.1.2). The virtual memory operations are all stubs; the new halftone options are not fully implemented. Changes makeimagedevice to use a string of gray or RGB values, rather than an array of color objects, to specify the palette. Removes currentgscolor and setgscolor from the interpreter, but leaves t_color objects in, since they may be useful later. Adds getdeviceprops and putdeviceprops for manipulating device properties. Currently defined properties for all devices: InitialMatrix, HWResolution, HWSize, Name. Currently defined properties for printers: BufferSpace, MaxBitmap, OutputFile. OutputFile allows |command for piping on Unix systems. Removes deviceparams and makedevice. Adds devicedefaultmatrix. Implements reversepath. Makes copy work on devices. MS-DOS specific - - - - - - - - Fixes bugs: - iutilasm.asm wouldn't assemble with newer versions of MASM if CPU_TYPE was set to 286 or above. - CPU_TYPE=386 didn't properly substitute the faster multiply/divide routines under Turbo C++ or Borland C++, only under the original Turbo C. Library ------- Fixes bugs: - A curve whose first and last points were the same wouldn't get drawn at all. - A bug in the Turbo C++ compiler generated bad code when shifting a long right by 1 bit. - If stroking a dashed line ever encountered a segment that was completely blank, Ghostscript would indirect through a null pointer. - arc and arcn gave an error if the radius was negative. - stroke always used the general algorithm, even if the line was guaranteed to be thin. - arc and arcn erroneously reduced the angles mod 360. - Very large or negative 32-bit numbers in Type 1 fonts didn't work properly on MS-DOS systems (the ff0000 bits got set to zero). - Color printer devices rendering entirely in memory only allocated a monochrome-sized bitmap. - clip and eoclip didn't intersect the paths properly in the general case. - charpath erroneously rounded the current point to an integral value, causing characters to be spaced improperly. - The definition of max_color_param got some compilers confused. - charpath always used quadratic time and space, and dropped all but the last character when used with a Type 3 font. - Stroking a path with a 180 degree angle would incorrectly miter instead of beveling. - Type 1 fonts used the current flatness for curves, which could produce bad (and inconsistent) results. - Stroking a degenerate line segment produced incorrect results. Changes the character cache to use the UniqueID as the key, when available, instead of the font pointer. This dramatically improves performance when fonts are getting removed and reloaded because of page isolation with save/restore. Removes some unnecessary casts to (float) from gsmatrix.c and gscoord.c. Changes the Type 1 interpreter so that it rounds line and curve endpoints to the center of the nearest half-pixel, and omits null line segments. This both speeds up rendering at small sizes and improves output quality. Changes gs_deviceparams to return resolution as well as extent; changes gs_makedevice to accept resolution as well as extent. Replaces the algorithm for approximating circular arcs with curves with a more accurate one. Changes gs_point and gs_rect to use doubles rather than floats. Adds gs_setmetrics, for overriding Type 1 font metrics for the current character. Changes clipping to use lists of rectangles rather than path intersection. This makes a big difference when clipping bitmaps (including characters). Changes the character cache to discard entries incrementally, rather than clearing the entire cache when it fills up. Changes the implementation of transfer functions to use a cached map, built when the transfer function is set. This makes transfer functions work properly in all situations, including images. Defines a .quit operator that takes an exit code, and redefines quit in terms of it. Adds support for 16-bit-per-pixel devices in gdevmem. Adds gs_copydevice and gs_deviceinitialmatrix; removes gs_deviceparams and gs_makedevice. Changes setscreen to ensure that the cell is always at least 4x4 pixels in size. Versions before 2.4 =================== See the file history.doc. .