Subj : Change of prt number for mbse
To   : All
From : Vincent Coen
Date : Fri Feb 04 2022 11:11 pm

Hello All!

I want to run a second version of mbse on a Raspberry Pi with a USB connected
1Tb Sata HDD as a back up system but more likely to just run the elist
software.  This way I can having set it up pass on the elist batton to some 
one
else as a total system as all it needs is LAN cable to router or hub, HDMI
cable for a monitor and if needed a two wire power cable (using a 8 socket)
for power.  Now it can work any where in the world as the power adaptor is one
for a Laptop with a voltage range of 100 - 240.
The benefit of this is that it is very low power requirement although it 
should
be connected to a UPS if at all possible (and yes my kit does even if only
good for around a hour).

Now as the primary BBS uses the standard port 24554 I would like it to use
24555.

This way I can tell the Router to port forward 24554 to pass all traffic to 
the
primary and if a poll comes in using 24555 to pass traffic to the Pi.

I cannot see how you set up the port in mbse and I think I have looked every
where (unless some one knows otherwise by doing a search of the manual for
'24554')  as it looks like 24554 is the standard and can't be changed - or can
it ?





Vincent
--- Mageia Linux v8 X64/Mbse v1.0.7.24/GoldED+/LNX 1.1.5-b20180707
 * Origin: Air Applewood, The Linux Gateway to the UK & Eire (2:250/1)

.